dotfiles專案
1.dotfile介紹
在linux中的各種軟體配置檔案大多是以.開頭,以rc結尾,在第一次使用某一個軟體比如vim的時候,通常會花大量時間配置,將所有的配置檔案放到同一個目錄下,方便在多臺機器上同步配置。下面是我自己的一個配置檔案專案以及shell指令碼。
2.專案地址
ofollow,noindex" target="_blank">https://github.com/VitasYuan/study-notes
3.部分指令碼程式碼
vim安裝和配置
配置檔案.vimrc
"========================================================================= " DesCRiption: 適合自己使用的vimrc檔案,for Linux/Windows, GUI/Console " " Last Change: 2010年08月02日 15時13分 " " Version: 1.80 " "========================================================================= set nocompatible " 關閉 vi 相容模式 syntax on " 自動語法高亮 set number " 顯示行號 set cursorline " 突出顯示當前行 set ruler " 開啟狀態列標尺 set shiftwidth=4 " 設定 << 和 >> 命令移動時的寬度為 4 set softtabstop=4 " 使得按退格鍵時可以一次刪掉 4 個空格 set tabstop=4 " 設定 tab 長度為 4 set nobackup " 覆蓋檔案時不備份 set autochdir " 自動切換當前目錄為當前檔案所在的目錄 filetype plugin indent on " 開啟外掛 set backupcopy=yes " 設定備份時的行為為覆蓋 set ignorecase smartcase " 搜尋時忽略大小寫,但在有一個或以上大寫字母時仍保持對大小寫敏感 set nowrapscan " 禁止在搜尋到檔案兩端時重新搜尋 set incsearch " 輸入搜尋內容時就顯示搜尋結果 set hlsearch " 搜尋時高亮顯示被找到的文字 set noerrorbells " 關閉錯誤資訊響鈴 set novisualbell " 關閉使用可視響鈴代替呼叫 set t_vb= " 置空錯誤鈴聲的終端程式碼 " set showmatch " 插入括號時,短暫地跳轉到匹配的對應括號 " set matchtime=2 " 短暫跳轉到匹配括號的時間 set magic " 設定魔術 set hidden " 允許在有未儲存的修改時切換緩衝區,此時的修改由 vim 負責儲存 set guioptions-=T " 隱藏工具欄 set guioptions-=m " 隱藏選單欄 set smartindent " 開啟新行時使用智慧自動縮排 set backspace=indent,eol,start " 不設定在插入狀態無法用退格鍵和 Delete 鍵刪除回車符 set cmdheight=1 " 設定命令列的行數為 1 set laststatus=2 " 顯示狀態列 (預設值為 1, 無法顯示狀態列) set statusline=\ %<%F[%1*%M%*%n%R%H]%=\ %y\ %0(%{&fileformat}\ %{&encoding}\ %c:%l/%L%)\ " 設定在狀態行顯示的資訊 set foldenable " 開始摺疊 set foldmethod=syntax " 設定語法摺疊 set foldcolumn=0 " 設定摺疊區域的寬度 setlocal foldlevel=1 " 設定摺疊層數為 " set foldclose=all " 設定為自動關閉摺疊 " nnoremap <space> @=((foldclosed(line('.')) < 0) ? 'zc' : 'zo')<CR> " 用空格鍵來開關摺疊 " return OS type, eg: windows, or linux, mac, et.st.. function! MySys() if has("win16") || has("win32") || has("win64") || has("win95") return "windows" elseif has("unix") return "linux" endif endfunction " 使用者目錄變數$VIMFILES if MySys() == "windows" let $VIMFILES = $VIM.'/vimfiles' elseif MySys() == "linux" let $VIMFILES = $HOME.'/.vim' endif " 設定doc文件目錄 let helptags=$VIMFILES.'/doc' " 設定字型 以及中文支援 if has("win32") set guifont=Inconsolata:h12:cANSI endif " 配置多語言環境 if has("multi_byte") " UTF-8 編碼 set encoding=utf-8 set termencoding=utf-8 set formatoptions+=mM set fencs=utf-8,gbk if v:lang =~? '^\(zh\)\|\(ja\)\|\(ko\)' set ambiwidth=double endif if has("win32") source $VIMRUNTIME/delmenu.vim source $VIMRUNTIME/menu.vim language messages zh_CN.utf-8 endif else echoerr "Sorry, this version of (g)vim was not compiled with +multi_byte" endif " Buffers操作快捷方式! nnoremap <C-RETURN> :bnext<CR> nnoremap <C-S-RETURN> :bprevious<CR> " Tab操作快捷方式! nnoremap <C-TAB> :tabnext<CR> nnoremap <C-S-TAB> :tabprev<CR> "關於tab的快捷鍵 " map tn :tabnext<cr> " map tp :tabprevious<cr> " map td :tabnew .<cr> " map te :tabedit " map tc :tabclose<cr> "視窗分割時,進行切換的按鍵熱鍵需要連線兩次,比如從下方視窗移動 "游標到上方視窗,需要<c-w><c-w>k,非常麻煩,現在重對映為<c-k>,切換的 "時候會變得非常方便. nnoremap <C-h> <C-w>h nnoremap <C-j> <C-w>j nnoremap <C-k> <C-w>k nnoremap <C-l> <C-w>l "一些不錯的對映轉換語法(如果在一個檔案中混合了不同語言時有用) nnoremap <leader>1 :set filetype=xhtml<CR> nnoremap <leader>2 :set filetype=css<CR> nnoremap <leader>3 :set filetype=javascript<CR> nnoremap <leader>4 :set filetype=php<CR> " set fileformats=unix,dos,mac " nmap <leader>fd :se fileformat=dos<CR> " nmap <leader>fu :se fileformat=unix<CR> " use Ctrl+[l|n|p|cc] to list|next|previous|jump to count the result " map <C-x>l <ESC>:cl<CR> " map <C-x>n <ESC>:cn<CR> " map <C-x>p <ESC>:cp<CR> " map <C-x>c <ESC>:cc<CR> " 讓 Tohtml 產生有 CSS 語法的 html " syntax/2html.vim,可以用:runtime! syntax/2html.vim let html_use_css=1 " Python 檔案的一般設定,比如不要 tab 等 autocmd FileType python set tabstop=4 shiftwidth=4 expandtab autocmd FileType python map <F12> :!python %<CR> " 選中狀態下 Ctrl+c 複製 vmap <C-c> "+y " 開啟javascript摺疊 let b:javascript_fold=1 " 開啟javascript對dom、html和css的支援 let javascript_enable_domhtmlcss=1 " 設定字典 ~/.vim/dict/檔案的路徑 autocmd filetype javascript set dictionary=$VIMFILES/dict/javascript.dict autocmd filetype css set dictionary=$VIMFILES/dict/css.dict autocmd filetype php set dictionary=$VIMFILES/dict/php.dict "----------------------------------------------------------------- " plugin - bufexplorer.vim Buffers切換 " \be 全屏方式檢視全部開啟的檔案列表 " \bv 左右方式檢視 \bs 上下方式檢視 "----------------------------------------------------------------- "----------------------------------------------------------------- " plugin - taglist.vim 檢視函式列表,需要ctags程式 " F4 開啟隱藏taglist視窗 "----------------------------------------------------------------- if MySys() == "windows" " 設定windows系統中ctags程式的位置 let Tlist_Ctags_Cmd = '"'.$VIMRUNTIME.'/ctags.exe"' elseif MySys() == "linux" " 設定windows系統中ctags程式的位置 let Tlist_Ctags_Cmd = '/usr/bin/ctags' endif nnoremap <silent><F4> :TlistToggle<CR> let Tlist_Show_One_File = 1 " 不同時顯示多個檔案的tag,只顯示當前檔案的 let Tlist_Exit_OnlyWindow = 1 " 如果taglist視窗是最後一個視窗,則退出vim let Tlist_Use_Right_Window = 1 " 在右側視窗中顯示taglist視窗 let Tlist_File_Fold_Auto_Close=1 " 自動摺疊當前非編輯檔案的方法列表 let Tlist_Auto_Open = 0 let Tlist_Auto_Update = 1 let Tlist_Hightlight_Tag_On_BufEnter = 1 let Tlist_Enable_Fold_Column = 0 let Tlist_Process_File_Always = 1 let Tlist_Display_Prototype = 0 let Tlist_Compact_Format = 1 "----------------------------------------------------------------- " plugin - mark.vim 給各種tags標記不同的顏色,便於觀看調式的外掛。 " \m mark or unmark the word under (or before) the cursor " \r manually input a regular expression. 用於搜尋. " \n clear this mark (i.e. the mark under the cursor), or clear all highlighted marks . " \* 當前MarkWord的下一個 \# 當前MarkWord的上一個 " \/ 所有MarkWords的下一個 \? 所有MarkWords的上一個 "----------------------------------------------------------------- "----------------------------------------------------------------- " plugin - NERD_tree.vim 以樹狀方式瀏覽系統中的檔案和目錄 " :ERDtree 開啟NERD_tree :NERDtreeClose 關閉NERD_tree " o 開啟關閉檔案或者目錄 t 在標籤頁中開啟 " T 在後臺標籤頁中開啟 ! 執行此檔案 " p 到上層目錄 P 到根目錄 " K 到第一個節點 J 到最後一個節點 " u 開啟上層目錄 m 顯示檔案系統選單(新增、刪除、移動操作) " r 遞迴重新整理當前目錄 R 遞迴重新整理當前根目錄 "----------------------------------------------------------------- " F3 NERDTree 切換 map <F3> :NERDTreeToggle<CR> imap <F3> <ESC>:NERDTreeToggle<CR> "----------------------------------------------------------------- " plugin - NERD_commenter.vim 註釋程式碼用的, " [count],cc 游標以下count行逐行添加註釋(7,cc) " [count],cu 游標以下count行逐行取消註釋(7,cu) " [count],cm 游標以下count行嘗試新增塊註釋(7,cm) " ,cA 在行尾插入 /* */,並且進入插入模式。 這個命令方便寫註釋。 " 注:count引數可選,無則預設為選中行或當前行 "----------------------------------------------------------------- let NERDSpaceDelims=1 " 讓註釋符與語句之間留一個空格 let NERDCompactSexyComs=1 " 多行註釋時樣子更好看 "----------------------------------------------------------------- " plugin - DoxygenToolkit.vim 由註釋生成文件,並且能夠快速生成函式標準註釋 "----------------------------------------------------------------- let g:DoxygenToolkit_authorName="Asins - asinsimple AT gmail DOT com" let g:DoxygenToolkit_briefTag_funcName="yes" map <leader>da :DoxAuthor<CR> map <leader>df :Dox<CR> map <leader>db :DoxBlock<CR> map <leader>dc a /* */<LEFT><LEFT><LEFT> "----------------------------------------------------------------- " plugin – ZenCoding.vim 很酷的外掛,HTML程式碼生成 " 外掛最新版:http://github.com/mattn/zencoding-vim " 常用命令可看:http://nootn.com/blog/Tool/23/ "----------------------------------------------------------------- "----------------------------------------------------------------- " plugin – checksyntax.vim JavaScript常見語法錯誤檢查 " 預設快捷方式為 F5 "----------------------------------------------------------------- let g:checksyntax_auto = 0 " 不自動檢查 "----------------------------------------------------------------- " plugin - NeoComplCache.vim 自動補全外掛 "----------------------------------------------------------------- let g:AutoComplPop_NotEnableAtStartup = 1 let g:NeoComplCache_EnableAtStartup = 1 let g:NeoComplCache_SmartCase = 1 let g:NeoComplCache_TagsAutoUpdate = 1 let g:NeoComplCache_EnableInfo = 1 let g:NeoComplCache_EnableCamelCaseCompletion = 1 let g:NeoComplCache_MinSyntaxLength = 3 let g:NeoComplCache_EnableSkipCompletion = 1 let g:NeoComplCache_SkipInputTime = '0.5' let g:NeoComplCache_SnippetsDir = $VIMFILES.'/snippets' " <TAB> completion. inoremap <expr><TAB> pumvisible() ? "\<C-n>" : "\<TAB>" " snippets expand key imap <silent> <C-e> <Plug>(neocomplcache_snippets_expand) smap <silent> <C-e> <Plug>(neocomplcache_snippets_expand) "----------------------------------------------------------------- " plugin - matchit.vim 對%命令進行擴充套件使得能在巢狀標籤和語句之間跳轉 " % 正向匹配 g% 反向匹配 " [% 定位塊首 ]% 定位塊尾 "----------------------------------------------------------------- "----------------------------------------------------------------- " plugin - vcscommand.vim 對%命令進行擴充套件使得能在巢狀標籤和語句之間跳轉 " SVN/git管理工具 "----------------------------------------------------------------- "----------------------------------------------------------------- " plugin – a.vim "-----------------------------------------------------------------
安裝和配置vim的shell指令碼實現
# 安裝vim,並新增預設配置 # 檢測vim是否已經安裝 if test ! $(rpm -qa | grep vim-enhanced) then echo "start install vim." yum -y install vim-enhanced.x86_64 >> install-log.txt if test $(grep "error" install-log.txt) then echo "install failed." else echo "install success." rm -rf install-log.txt if test -e ~/.vimrc then echo ".vimrc exist, rename as .vimrc-default" mv ~/.vimrc ~/.vimrc-default cp .vimrc ~/.vimrc fi cp .vimrc ~/.vimrc echo "install and config success. fi else echo "you have installed vim" fi exit 0
安裝JDK環境的shell指令碼
# 安裝jdk8 if test ! $(which java) then echo "start install jdk.." if test ! $(which wget) then yum -y install wget.x86_64 >> install-log.txt fi wget -c http://111.1.50.14/files/7194000006F691AA/download.oracle.com/otn-pub/java/jdk/8u181-b13/96a7b8442fe848ef90c96a2fad6ed6d1/jdk-8u181-linux-x64.rpm >> install-log.txt rpm -ivh jdk-8u181-linux-x64.rpm if test $(which java) then echo "install finished" else echo "install failed" grep "error" install-log.txt fi else echo "java is already installed." fi
專案剛開始搭建,後續會持續更新。