vmware報Device eth0 does not seem to be present, delaying initialization錯誤
系統環境:
CentOS-6.8-X86_64
使用vmware的克隆功能後,使用新克隆的虛擬機會報Device eth0 does not seem to be present, delaying initialization這樣一個錯誤,這是由於網卡MAC地址錯誤導致的問題。
解決方法:
1、刪除/etc/udev/rules.d/70-persistent-net.rules文件
2、編輯/etc/sysconfig/network-scripts/ifcfg-ethX文件,刪除關於MAC的信息
3、重啟虛擬機
vmware報Device eth0 does not seem to be present, delaying initialization錯誤
相關推薦
vmware報Device eth0 does not seem to be present, delaying initialization錯誤
device 系統 vmware udev per network ini 關於 scrip 系統環境: CentOS-6.8-X86_64 使用vmware的克隆功能後,使用新克隆的虛擬機會報Device eth0 does not seem to be pres
centos6下網絡卡報Device p8p1 does not seem to be present, delaying initialization.錯誤的解決辦法
cd /etc/sysconfig/network-scriptscat ifcfg-p8p1檢視ifcfg-p8p1配置檔案裡面mac地址並幾下來。cd /etc/udev/rules.dcat 70-persistent-net.rules 檢視70-persistent
Linux克隆虛擬機器引起的“Device eth0 does not seem to be present, delaying initialization”報錯
⭐關於虛擬機器Vmware上克隆了一個CentOS Linux啟動時發現找不到網絡卡,如下所示,如果你在命令視窗啟動網路服務就會遇到”Device eth0 does not seem to be present, delaying initialization
virualbox 複製linux,啟用網絡卡報錯:device "eth0" does not seem to be present, delaying initialization
virualbox 虛擬機器複製linux,啟用網絡卡報錯:device “eth0” does not seem to be present, delaying initialization 問題描述: 在virualbox中複製虛擬機器,無法查詢
CentOS配置eth0重啟報錯提示Device eth0 does not seem to be present,delaying initialization.
inf tar ini work udev per linux服務器 bsp 現象 故障現象:CentOS6.6 從虛擬機中克隆的一個Linux服務器,配置好ifcfg-eth0網卡後,重啟網絡報錯 故障原因:可能是克隆虛擬機後,虛擬機(Vmware)中移
Device eth0 does not seem to be present, delaying initialization: Linux Networking
failure uid rules init bsp dns pan nano ice copy centos 報錯 Device eth0 does not seem to be present, delaying initialization: Linux Networ
Bringing up interface eth0: Device eth0 does not seem to be present, delaying initialization.FAILED
1、service network stop 2、/etc/sysconfig/network-scripts目錄下,刪除想要刪除的網絡卡配置,我要刪除eth1,所以rm -rf ifcfg-eth1,其他的以此類推 3、/etc/sysconfig/networking/devices目錄下,刪除全部檔
Bringing up interface eth0: Device eth0 does not seem to be present, delaying initialization.
Bringing up interface eth0: Device eth0 does not seem to be present, delaying initialization. 在linux下的虛擬機器出現了這個問題,問題的產生是因為之間做過部分的修改,clon
Bringing up interface eth0: Device eth0 does not seem to be present, delaying initialization.
Bringing up interface eth0: Device eth0 does not seem to be present, delaying initialization. 在linux下的虛擬機器出現了這個問題,問題的產生是因為之間做過部分的修改,cl
解決Bringing up interface eth0: Device eth0 does not seem to be present, delaying initialization.
一、問題描述 原因可能是因為克隆虛擬機器造成的。在使用vmworkstation開啟虛擬機器的時候,要選擇克隆而非複製。 二、解決描述 網路上解決步驟各異,其實就一句話。只要保證vmwrare virtual machine的.vmx配置檔案、ifconf
Vmware CentOS Device eth0 does not seem to be present
虛擬機器以前是圖形版本,把圖形關掉, 又ntsysv只開 network sshd crond rsyslog 4個服務,重啟,完了,網絡卡沒有了,網上說刪除 /etc/70-persistent-net.rules之類的,不行! 正解: 虛擬機器設定-網路-
遷移vmware伺服器後Device eth0 does not seem to be present
用VMware 安裝 linux 6.0 後,網路連線不上 service network restart 出現以下提示evice eth0 does not seem to be present使用ifconfig 命令只能看到lo 的狀態資訊, 使用ifconfig -a 如下—————————————
CentOS Linux解決Device eth0 does not seem to be present
uuid mac地址 網卡啟動在VMware裏克隆出來的CentOS Linux。。ifconfig...沒有看到eth0.。然後重啟網卡又報下面錯誤。故障現象:service network restartShutting down loopback insterface:
Linux_解決啟動網卡失敗 Device eth0 does not seem to be present
see src sta 保存 文件 face 虛擬 接下來 inter Linux_解決啟動網卡失敗 Device eth0 does not seem to be present 虛擬機克隆 發現service network restart 啟動失敗 故障現象:
Bring up interface eth0:Device eth0 does not seem to be present,delaying initialization
近期在學習Linux,由於沒有足夠多的物理機,只能使用vmware虛擬出多臺機器來,為了圖省事,在一臺虛擬機器裝完CentOS後,就克隆了三臺,可是在使用克隆的三臺機器時,發現網路使用時出現了Bring up interface eth0:Device eth0 does not seem to b
Device eth0 does not seem to be present”解決辦法 (常見於克隆系統後出現的網路配置問題)
# service network restartShutting down loopback insterface: [ OK ] Bringing up loopback insterface: [ OK ]Bringing up interface eth0: Dev
5.Linux解決Device eth0 does not seem to be present
-s spa 軟件 bsp .com service 是否 技術 clas Linux操作系統排除故障 導入vixualbox的虛擬機voa文件到另外一臺電腦,需要檢查如下信息 修改虛擬機軟件網絡設置 重啟Linux操作系統 shutdown -h n
Linux RedHat下解決“Device eht0 does not seem to be present, delay nitialzation”報錯問題
net linux href 命令 scripts bsp 退出 dha 分享 配置號IP地址後,使用ifconfig命令,沒有顯示eth0,重啟網卡(service network restart)又遇到以下報錯信息 報錯信息: 解決辦法: 首先使用ifconfig
虛擬機器網絡卡與配置檔案不匹配 Device eth0 does not seem to bepresent
安裝虛擬機器並複製之後,面臨一個問題就是MAC的變更。 當Vmware第一次打開復制虛擬機器的時候,會詢問你虛擬機器來源 如果你選擇 I Copy It 那麼虛擬機器會自動幫你變更MAC地址。 或者你可以自己手工變更MAC地址 此時就會發現ifconfig與 /etc
使用Hyper-v克隆虛擬機器出現克隆後虛擬機器不能使用eth0,eth0 提示Device does not seem to be present
故障前的操作: DELL刀片裝的是CentOS6.3的作業系統,網絡卡識別的是em1和em2,由於工作需要做了槽位調整,並啟動了刀片 故障現象: 啟動後網路不通,通過iDRAC登入後route檢視預設路由正常; 重啟網路服務: [[email protected] ~]# service