5 Ways to Make Your Hive Queries Run Faster
5 Ways to Make Your Hive Queries Run Faster
Technique #1: Use Tez Hive can use the Apache Tez execution engine instead of the venerable Map-reduce engine. I won’t go into details about the many benefits of using Tez which are mentioned here; instead, I want to make a simple recommendation: if it’s not turned on by default in your environment, use Tez by setting to ‘true’ the following in the beginning of your Hive query: set hive.execution.engine=tez; With the above setting, every HIVE query you execute will take advantage of Tez. Technique #2: Use ORCFile Hive supports ORCfile, a new table storage format that sports fantastic speed improvements through techniques like predicate push-down, compression and more. Using ORCFile for every HIVE table should really be a no-brainer and extremely beneficial to get fast response times for your HIVE queries. As an example, consider two large tables A and B (stored as text files, with some columns not all specified here), and a simple query like: SELECT A.customerID, A.name, A.age, A.address join B.role, B.department, B.salary ON A.customerID=B.customerID; This query may take a long time to execute since tables A and B are both stored as TEXT. Converting these tables to ORCFile format will usually reduce query time significantly: CREATE TABLE A_ORC ( customerID int, name string, age int, address string ) STORED AS ORC tblproperties (“orc.compress" = “SNAPPY”); INSERT INTO TABLE A_ORC SELECT * FROM A; CREATE TABLE B_ORC ( customerID int, role string, salary float, department string ) STORED AS ORC tblproperties (“orc.compress" = “SNAPPY”); INSERT INTO TABLE B_ORC SELECT * FROM B; SELECT A_ORC.customerID, A_ORC.name, A_ORC.age, A_ORC.address join B_ORC.role, B_ORC.department, B_ORC.salary ON A_ORC.customerID=B_ORC.customerID; ORC supports compressed storage (with ZLIB or as shown above with SNAPPY) but also uncompressed storage. Converting base tables to ORC is often the responsibility of your ingest team, and it may take them some time to change the complete ingestion process due to other priorities. The benefits of ORCFile are so tangible that I often recommend a do-it-yourself approach as demonstrated above – convert A into A_ORC and B into B_ORC and do the join that way, so that you benefit from faster queries immediately, with no dependencies on other teams. Technique #3: Use Vectorization Vectorized query execution improves performance of operations like scans, aggregations, filters and joins, by performing them in batches of 1024 rows at once instead of single row each time. Introduced in Hive 0.13, this feature significantly improves query execution time, and is easily enabled with two parameters settings: set hive.vectorized.execution.enabled = true; set hive.vectorized.execution.reduce.enabled = true; Technique #4: cost based query optimization Hive optimizes each query’s logical and physical execution plan before submitting for final execution. These optimizations are not based on the cost of the query – that is, until now. A recent addition to Hive, Cost-based optimization, performs further optimizations based on query cost, resulting in potentially different decisions: how to order joins, which type of join to perform, degree of parallelism and others. To use cost-based optimization (also known as CBO), set the following parameters at the beginning of your query: set hive.cbo.enable=true; set hive.compute.query.using.stats=true; set hive.stats.fetch.column.stats=true; set hive.stats.fetch.partition.stats=true; Then, prepare the data for CBO by running Hive’s “analyze” command to collect various statistics on the tables for which we want to use CBO. For example, in a table tweets we want to collect statistics about the table and about 2 columns: “sender” and “topic”: analyze table tweets compute statistics; analyze table tweets compute statistics for columns sender, topic; With HIVE 0.14 (on HDP 2.2) the analyze command works much faster, and you don’t need to specify each column, so you can just issue: analyze table tweets compute statistics for columns; That’s it. Now executing a query using this table should result in a different execution plan that is faster because of the cost calculation and different execution plan created by Hive. Technique #5: Write good SQL SQL is a powerful declarative language. Like other declarative languages, there is more than one way to write a SQL statement. Although each statement’s functionality is the same, it may have strikingly different performance characteristics. Let’s look at an example. Consider a click-stream event table: CREATE TABLE clicks ( timestamp date, sessionID string, url string, source_ip string ) STORED as ORC tblproperties (“orc.compress” = “SNAPPY”); Each record represents a click event, and we would like to find the latest URL for each sessionID. One might consider the following approach: SELECT clicks.* FROM clicks inner join (select sessionID, max(timestamp) as max_ts from clicks group by sessionID) latest ON clicks.sessionID = latest.sessionID and clicks.timestamp = latest.max_ts; In the above query, we build a sub-query to collect the timestamp of the latest event in each session, and then use an inner join to filter out the rest. While the query is a reasonable solution—from a functional point of view—it turns out there’s a better way to re-write this query as follows: SELECT * FROM (SELECT *, RANK() over (partition by sessionID, order by timestamp desc) as rank FROM clicks) ranked_clicks WHERE ranked_clicks.rank=1; Here we use Hive’s OLAP functionality (OVER and RANK) to achieve the same thing, but without a Join. Clearly, removing an unnecessary join will almost always result in better performance, and when using big data this is more important than ever. I find many cases where queries are not optimal — so look carefully at every query and consider if a rewrite can make it better and faster. Summary Apache Hive is a powerful tool in the hands of data analysts and data scientists, and supports a variety of batch and interactive workloads. In this blog post, I’ve discussed some useful techniques—the ones I use most often and find most useful for my day-to-day work as a data scientist—to make Hive queries run faster. Thankfully, the Hive community is not finished yet. Even between HIVE 0.13 and HIVE 0.14, there are dramatic improvements in ORCFiles, vectorization and CBO and how they positively impact query performance. I’m really excited about Stinger.next, bringing performance improvements to the sub-second range. I can’t wait.
Technique #1: Use Tez Hive can use the Apache Tez execution engine instead of the venerable Map-reduce engine. I won’t go into details about the many benefits of using Tez which are mentioned here; instead, I want to make a simple recommendation: if it’s not turned on by default in your environment, use Tez by setting to ‘true’ the following in the beginning of your Hive query: set hive.execution.engine=tez; With the above setting, every HIVE query you execute will take advantage of Tez. Technique #2: Use ORCFile Hive supports ORCfile, a new table storage format that sports fantastic speed improvements through techniques like predicate push-down, compression and more. Using ORCFile for every HIVE table should really be a no-brainer and extremely beneficial to get fast response times for your HIVE queries. As an example, consider two large tables A and B (stored as text files, with some columns not all specified here), and a simple query like: SELECT A.customerID, A.name, A.age, A.address join B.role, B.department, B.salary ON A.customerID=B.customerID; This query may take a long time to execute since tables A and B are both stored as TEXT. Converting these tables to ORCFile format will usually reduce query time significantly: CREATE TABLE A_ORC ( customerID int, name string, age int, address string ) STORED AS ORC tblproperties (“orc.compress" = “SNAPPY”); INSERT INTO TABLE A_ORC SELECT * FROM A; CREATE TABLE B_ORC ( customerID int, role string, salary float, department string ) STORED AS ORC tblproperties (“orc.compress" = “SNAPPY”); INSERT INTO TABLE B_ORC SELECT * FROM B; SELECT A_ORC.customerID, A_ORC.name, A_ORC.age, A_ORC.address join B_ORC.role, B_ORC.department, B_ORC.salary ON A_ORC.customerID=B_ORC.customerID; ORC supports compressed storage (with ZLIB or as shown above with SNAPPY) but also uncompressed storage. Converting base tables to ORC is often the responsibility of your ingest team, and it may take them some time to change the complete ingestion process due to other priorities. The benefits of ORCFile are so tangible that I often recommend a do-it-yourself approach as demonstrated above – convert A into A_ORC and B into B_ORC and do the join that way, so that you benefit from faster queries immediately, with no dependencies on other teams. Technique #3: Use Vectorization Vectorized query execution improves performance of operations like scans, aggregations, filters and joins, by performing them in batches of 1024 rows at once instead of single row each time. Introduced in Hive 0.13, this feature significantly improves query execution time, and is easily enabled with two parameters settings: set hive.vectorized.execution.enabled = true; set hive.vectorized.execution.reduce.enabled = true; Technique #4: cost based query optimization Hive optimizes each query’s logical and physical execution plan before submitting for final execution. These optimizations are not based on the cost of the query – that is, until now. A recent addition to Hive, Cost-based optimization, performs further optimizations based on query cost, resulting in potentially different decisions: how to order joins, which type of join to perform, degree of parallelism and others. To use cost-based optimization (also known as CBO), set the following parameters at the beginning of your query: set hive.cbo.enable=true; set hive.compute.query.using.stats=true; set hive.stats.fetch.column.stats=true; set hive.stats.fetch.partition.stats=true; Then, prepare the data for CBO by running Hive’s “analyze” command to collect various statistics on the tables for which we want to use CBO. For example, in a table tweets we want to collect statistics about the table and about 2 columns: “sender” and “topic”: analyze table tweets compute statistics; analyze table tweets compute statistics for columns sender, topic; With HIVE 0.14 (on HDP 2.2) the analyze command works much faster, and you don’t need to specify each column, so you can just issue: analyze table tweets compute statistics for columns; That’s it. Now executing a query using this table should result in a different execution plan that is faster because of the cost calculation and different execution plan created by Hive. Technique #5: Write good SQL SQL is a powerful declarative language. Like other declarative languages, there is more than one way to write a SQL statement. Although each statement’s functionality is the same, it may have strikingly different performance characteristics. Let’s look at an example. Consider a click-stream event table: CREATE TABLE clicks ( timestamp date, sessionID string, url string, source_ip string ) STORED as ORC tblproperties (“orc.compress” = “SNAPPY”); Each record represents a click event, and we would like to find the latest URL for each sessionID. One might consider the following approach: SELECT clicks.* FROM clicks inner join (select sessionID, max(timestamp) as max_ts from clicks group by sessionID) latest ON clicks.sessionID = latest.sessionID and clicks.timestamp = latest.max_ts; In the above query, we build a sub-query to collect the timestamp of the latest event in each session, and then use an inner join to filter out the rest. While the query is a reasonable solution—from a functional point of view—it turns out there’s a better way to re-write this query as follows: SELECT * FROM (SELECT *, RANK() over (partition by sessionID, order by timestamp desc) as rank FROM clicks) ranked_clicks WHERE ranked_clicks.rank=1; Here we use Hive’s OLAP functionality (OVER and RANK) to achieve the same thing, but without a Join. Clearly, removing an unnecessary join will almost always result in better performance, and when using big data this is more important than ever. I find many cases where queries are not optimal — so look carefully at every query and consider if a rewrite can make it better and faster. Summary Apache Hive is a powerful tool in the hands of data analysts and data scientists, and supports a variety of batch and interactive workloads. In this blog post, I’ve discussed some useful techniques—the ones I use most often and find most useful for my day-to-day work as a data scientist—to make Hive queries run faster. Thankfully, the Hive community is not finished yet. Even between HIVE 0.13 and HIVE 0.14, there are dramatic improvements in ORCFiles, vectorization and CBO and how they positively impact query performance. I’m really excited about Stinger.next, bringing performance improvements to the sub-second range. I can’t wait.
5 Ways to Make Your Hive Queries Run Faster