步驟一,生成本地密鑰對：

[test]rsa local-key-pair create 
The key name will be: Auotnavi-callcenter-01_Host 
The range of public key size is (512 ~ 2048). 
NOTES: If the key modulus is greater than 512, 
       It will take a few minutes. 
Input the bits in the modulus[default = 512]:1024 
Generating keys... 
.++++++ 
............++++++ 
...............++++++++ 
.++++++++

步驟二，配置VTY用戶界面：

[Auotnavi-callcenter-01]user 
[Auotnavi-callcenter-01]user-interface vty 0 4 
[Auotnavi-callcenter-01-ui-vty0-4]authentication-mode aaa 
[Auotnavi-callcenter-01-ui-vty0-4]protocol inbound ssh

步驟三，創建SSH用戶及密碼

#aaa
#local-user root password simple 123456 
#local-user root privilege level 3 
#local-user root service-type ssh

步驟四: 配置ssh用戶的認證方式和服務方式

[Quidway] ssh user 用戶名 authentication-type password
或[Quidway] ssh authentication-type default password   #如果用戶過多可直接設置默認的認證方式
[Quidway] ssh user username service-type {sftp | stelnet | all }      #這步驟沒有配置，可能出現 server refused to start a shell/command.

步驟五：使能ssh服務

[Quidway] stelnet server enable

開啟華為交換機路由器ssh訪問