redis 一主二從三哨兵
阿新 • • 發佈：2017-12-01
mina ase 成功 所有 listen started mod lin config ![技術分享圖片]()
![技術分享圖片]()
![技術分享圖片]()
![技術分享圖片]()
![技術分享圖片]()
![技術分享圖片]()
![技術分享圖片]()
![技術分享圖片]()
![技術分享圖片]()
總體部署
- 一主二從三哨兵
- ip地址分配分別為
- 主 127.0.0.1:6379
- 從 127.0.0.1:6389
- 從 127.0.0.1:6399
- 哨兵 127.0.0.1:26379
- 哨兵 127.0.0.1:26389
- 哨兵 127.0.0.1:26399
一主二從的配置文件 redis.conf設置
主的保持默認的不變
二個從的分別打開配置文件
找到設置端口的地方
分別設置為 6389 和6399
# Accept connections on the specified port, default is 6379 (IANA #815344). # If port 0 is specified Redis will not listen on a TCP socket. port 6389
# Accept connections on the specified port, default is 6379 (IANA #815344). # If port 0 is specified Redis will not listen on a TCP socket. port 6399
然後都在
# slaveof <masterip> <masterport>
一行的下面增加
slaveof 127.0.0.1 6379
這樣主從的配置就ok了
三個哨兵的sentinel.conf配置
分別打開sentinel.conf配置文件
修改他們的端口為
26379 26389 26399
sentinel monitor mymaster 127.0.0.1 6379 2
配置中的這一行表示 我們要監視的主的ip和端口，mymaster是主的名稱，因為我們的主是127.0.0.1:6379,所以三個哨兵中的這個地方都不用修改。
然後所有的配置就ok了，本地測試環境貌似需要改動的地方不多。
啟動
- 主
進入src目錄
./redis-server ../redis.conf
25496:M 18 Feb 21:43:12.616 * Increased maximum number of open files to 10032 (it was originally set to 4864).
_._
_.-``__ ‘‘-._
_.-`` `. `_. ‘‘-._ Redis 3.2.8 (00000000/0) 64 bit
.-`` .-```. ```\/ _.,_ ‘‘-._
( ‘ , .-` | `, ) Running in standalone mode
|`-._`-...-` __...-.``-._|‘` _.-‘| Port: 6379
| `-._ `._ / _.-‘ | PID: 25496
`-._ `-._ `-./ _.-‘ _.-‘
|`-._`-._ `-.__.-‘ _.-‘_.-‘|
| `-._`-._ _.-‘_.-‘ | http://redis.io
`-._ `-._`-.__.-‘_.-‘ _.-‘
|`-._`-._ `-.__.-‘ _.-‘_.-‘|
| `-._`-._ _.-‘_.-‘ |
`-._ `-._`-.__.-‘_.-‘ _.-‘
`-._ `-.__.-‘ _.-‘
`-._ _.-‘
`-.__.-‘
25496:M 18 Feb 21:43:12.618 # Server started, Redis version 3.2.8
25496:M 18 Feb 21:43:12.618 * DB loaded from disk: 0.000 seconds
25496:M 18 Feb 21:43:12.618 * The server is now ready to accept connections on port 6379
25496:M 18 Feb 21:43:21.196 * Slave 127.0.0.1:6389 asks for synchronization
25496:M 18 Feb 21:43:21.196 * Full resync requested by slave 127.0.0.1:6389
25496:M 18 Feb 21:43:21.196 * Starting BGSAVE for SYNC with target: disk
25496:M 18 Feb 21:43:21.197 * Background saving started by pid 25498
25498:C 18 Feb 21:43:21.198 * DB saved on disk
25496:M 18 Feb 21:43:21.198 * Background saving terminated with success
25496:M 18 Feb 21:43:21.198 * Synchronization with slave 127.0.0.1:6389 succeeded
25496:M 18 Feb 21:43:28.979 * Slave 127.0.0.1:6399 asks for synchronization
25496:M 18 Feb 21:43:28.979 * Full resync requested by slave 127.0.0.1:6399
25496:M 18 Feb 21:43:28.979 * Starting BGSAVE for SYNC with target: disk
25496:M 18 Feb 21:43:28.980 * Background saving started by pid 25500
25500:C 18 Feb 21:43:28.986 * DB saved on disk
25496:M 18 Feb 21:43:29.044 * Background saving terminated with success
25496:M 18 Feb 21:43:29.044 * Synchronization with slave 127.0.0.1:6399 succeeded
- 從1
進入src目錄
./redis-server ../redis.conf
25497:S 18 Feb 21:43:21.194 * Increased maximum number of open files to 10032 (it was originally set to 4864).
_._
_.-``__ ‘‘-._
_.-`` `. `_. ‘‘-._ Redis 3.2.8 (00000000/0) 64 bit
.-`` .-```. ```\/ _.,_ ‘‘-._
( ‘ , .-` | `, ) Running in standalone mode
|`-._`-...-` __...-.``-._|‘` _.-‘| Port: 6389
| `-._ `._ / _.-‘ | PID: 25497
`-._ `-._ `-./ _.-‘ _.-‘
|`-._`-._ `-.__.-‘ _.-‘_.-‘|
| `-._`-._ _.-‘_.-‘ | http://redis.io
`-._ `-._`-.__.-‘_.-‘ _.-‘
|`-._`-._ `-.__.-‘ _.-‘_.-‘|
| `-._`-._ _.-‘_.-‘ |
`-._ `-._`-.__.-‘_.-‘ _.-‘
`-._ `-.__.-‘ _.-‘
`-._ _.-‘
`-.__.-‘
25497:S 18 Feb 21:43:21.196 # Server started, Redis version 3.2.8
25497:S 18 Feb 21:43:21.196 * DB loaded from disk: 0.000 seconds
25497:S 18 Feb 21:43:21.196 * The server is now ready to accept connections on port 6389
25497:S 18 Feb 21:43:21.196 * Connecting to MASTER 127.0.0.1:6379
25497:S 18 Feb 21:43:21.196 * MASTER <-> SLAVE sync started
25497:S 18 Feb 21:43:21.196 * Non blocking connect for SYNC fired the event.
25497:S 18 Feb 21:43:21.196 * Master replied to PING, replication can continue...
25497:S 18 Feb 21:43:21.196 * Partial resynchronization not possible (no cached master)
25497:S 18 Feb 21:43:21.197 * Full resync from master: b17cd8764974c68bedacb2e5927a04e9ff15f7df:1
25497:S 18 Feb 21:43:21.198 * MASTER <-> SLAVE sync: receiving 108 bytes from master
25497:S 18 Feb 21:43:21.198 * MASTER <-> SLAVE sync: Flushing old data
25497:S 18 Feb 21:43:21.198 * MASTER <-> SLAVE sync: Loading DB in memory
25497:S 18 Feb 21:43:21.199 * MASTER <-> SLAVE sync: Finished with success
- 從2
進入src目錄
./redis-server ../redis.conf
25499:S 18 Feb 21:43:28.975 * Increased maximum number of open files to 10032 (it was originally set to 4864).
_._
_.-``__ ‘‘-._
_.-`` `. `_. ‘‘-._ Redis 3.2.8 (00000000/0) 64 bit
.-`` .-```. ```\/ _.,_ ‘‘-._
( ‘ , .-` | `, ) Running in standalone mode
|`-._`-...-` __...-.``-._|‘` _.-‘| Port: 6399
| `-._ `._ / _.-‘ | PID: 25499
`-._ `-._ `-./ _.-‘ _.-‘
|`-._`-._ `-.__.-‘ _.-‘_.-‘|
| `-._`-._ _.-‘_.-‘ | http://redis.io
`-._ `-._`-.__.-‘_.-‘ _.-‘
|`-._`-._ `-.__.-‘ _.-‘_.-‘|
| `-._`-._ _.-‘_.-‘ |
`-._ `-._`-.__.-‘_.-‘ _.-‘
`-._ `-.__.-‘ _.-‘
`-._ _.-‘
`-.__.-‘
25499:S 18 Feb 21:43:28.977 # Server started, Redis version 3.2.8
25499:S 18 Feb 21:43:28.977 * DB loaded from disk: 0.000 seconds
25499:S 18 Feb 21:43:28.977 * The server is now ready to accept connections on port 6399
25499:S 18 Feb 21:43:28.979 * Connecting to MASTER 127.0.0.1:6379
25499:S 18 Feb 21:43:28.979 * MASTER <-> SLAVE sync started
25499:S 18 Feb 21:43:28.979 * Non blocking connect for SYNC fired the event.
25499:S 18 Feb 21:43:28.979 * Master replied to PING, replication can continue...
25499:S 18 Feb 21:43:28.979 * Partial resynchronization not possible (no cached master)
25499:S 18 Feb 21:43:28.980 * Full resync from master: b17cd8764974c68bedacb2e5927a04e9ff15f7df:15
25499:S 18 Feb 21:43:29.044 * MASTER <-> SLAVE sync: receiving 108 bytes from master
25499:S 18 Feb 21:43:29.045 * MASTER <-> SLAVE sync: Flushing old data
25499:S 18 Feb 21:43:29.045 * MASTER <-> SLAVE sync: Loading DB in memory
25499:S 18 Feb 21:43:29.045 * MASTER <-> SLAVE sync: Finished with success
- 哨兵1
進入src目錄
./redis-sentinel ../sentinel.conf
25501:X 18 Feb 21:43:35.300 * Increased maximum number of open files to 10032 (it was originally set to 4864).
_._
_.-``__ ‘‘-._
_.-`` `. `_. ‘‘-._ Redis 3.2.8 (00000000/0) 64 bit
.-`` .-```. ```\/ _.,_ ‘‘-._
( ‘ , .-` | `, ) Running in sentinel mode
|`-._`-...-` __...-.``-._|‘` _.-‘| Port: 26379
| `-._ `._ / _.-‘ | PID: 25501
`-._ `-._ `-./ _.-‘ _.-‘
|`-._`-._ `-.__.-‘ _.-‘_.-‘|
| `-._`-._ _.-‘_.-‘ | http://redis.io
`-._ `-._`-.__.-‘_.-‘ _.-‘
|`-._`-._ `-.__.-‘ _.-‘_.-‘|
| `-._`-._ _.-‘_.-‘ |
`-._ `-._`-.__.-‘_.-‘ _.-‘
`-._ `-.__.-‘ _.-‘
`-._ _.-‘
`-.__.-‘
25501:X 18 Feb 21:43:35.301 # Sentinel ID is 6f3360c06cafe7807e2c1ae00fe7c791354b8b24
25501:X 18 Feb 21:43:35.301 # +monitor master mymaster 127.0.0.1 6379 quorum 2
- 哨兵2和哨兵3啟動過程相同
驗證
新開一個命令行窗口進入redis的src目錄，用redis-cli工具登錄其中一個哨兵
./redis-cli -p 26379
連接成功後運行如下命令
sentinel master mymaster
結果如下
127.0.0.1:26379> sentinel master mymaster 1) "name" 2) "mymaster" 3) "ip" 4) "127.0.0.1" 5) "port" 6) "6379" 7) "runid" 8) "b17cd8764974c68bedacb2e5927a04e9ff15f7df" 9) "flags" 10) "master" 11) "link-pending-commands" 12) "0" 13) "link-refcount" 14) "1" 15) "last-ping-sent" 16) "0" 17) "last-ok-ping-reply" 18) "703" 19) "last-ping-reply" 20) "703" 21) "down-after-milliseconds" 22) "30000" 23) "info-refresh" 24) "1090" 25) "role-reported" 26) "master" 27) "role-reported-time" 28) "3253725" 29) "config-epoch" 30) "0" 31) "num-slaves" 32) "2" 33) "num-other-sentinels" 34) "2" 35) "quorum" 36) "2" 37) "failover-timeout" 38) "180000" 39) "parallel-syncs" 40) "1"
redis 一主二從三哨兵