this ali started bootrom root cfg start plane boot

以下為真機實際演示全過程，請參閱：
BIOS LOADING ...
Copyright (c) 2008-2011 HUAWEI TECH CO., LTD.
(Ver349, Mar 15 2013, 11:00:55)

Press Ctrl+B to enter BOOTROM menu ... //重啟設備按下CTRL+B組合鍵，進入BOOTROM模式
password: //此處需要鍵入進入BOOTROM的密碼，密碼默認為[email protected]或者
[email protected]

      BOOTROM  MENU

1. Boot with default mode
2. Enter serial submenu
3. Enter startup submenu
4. Enter ethernet submenu
5. Enter filesystem submenu
6. Modify BOOTROM password
7. Clear password for console user
8. Reboot
 

Enter your choice(1-8): 7 //進入7，選擇清除console用戶密碼模式

Note: Clear password for console user? Yes or No(Y/N): y //鍵入Y確認清除密碼

Clear password for console user successfully. Choose "1" to boot, then set a new password. //清除密碼成功，選擇1來啟動設備，在啟動時會提示輸入密碼
Note: Do not choose "8. Reboot" or power off the device, otherwise this operation will not take effect. //請不要選擇8來重啟設備或者關閉電源，否則操作無效

      BOOTROM  MENU

1. Boot with default mode
2. Enter serial submenu
3. Enter startup submenu
4. Enter ethernet submenu
5. Enter filesystem submenu
6. Modify BOOTROM password
7. Clear password for console user
8. Reboot

Enter your choice(1-8): 1 //鍵入1啟動默認模式
啟動過程省略
VRP_Root begin...
VRP_InitializeTask begin...

Init the Device Link.............OK
CFG_PlaneInit begin..............OK
CFM_Init begin...................OK
CLI_CmdInit begin................OK
VRP_RegestAllLINKCmd begin.......OK
create task begin................
task init begin...

Recover configuration...OK!
Press ENTER to get started.

Please configure the login password (6-16)
Enter Password: //設備啟動後，設置新密碼即可

破解華為交換機密碼