Kernel parameters for Db2 database server installation (Linux and UNIX)
Db2 11.1
For root installations, the database manager uses a formula to automatically adjust kernel parameter settings and eliminate the need for manual updates to these settings.
Before you begin
You must have root authority to modify kernel parameters.Procedure
To update kernel parameters on Red Hat and SUSE Linux:
- Run the ipcs -l command to list the current kernel parameter settings.
- Analyze the command output to determine whether you have to change kernel settings or not by comparing the current values with the enforced minimum settings in the following table.
IPC kernel parameter Enforced minimum setting kernel.shmmni (SHMMNI) 256 * <size of RAM in GB> kernel.shmmax (SHMMAX) <size of RAM in bytes>1 kernel.shmall (SHMALL) 2 * <size of RAM in the default system page size>2 kernel.sem (SEMMNI) 256 * <size of RAM in GB> kernel.sem (SEMMSL) 250 kernel.sem (SEMMNS) 256 000 kernel.sem (SEMOPM) 32 kernel.msgmni (MSGMNI) 1 024 * <size of RAM in GB> kernel.msgmax (MSGMAX) 65 536 kernel.msgmnb (MSGMNB) 65 536 3 - On 32-bit Linux operating systems, the enforced minimum setting for SHMMAX is limited to 4 294 967 295 bytes.
- SHMALL limits the total amount of virtual shared memory that can be allocated on a system. Each Db2? data server efficiently manages the amount of system memory it consumes, also know as committed memory. TheDb2 data server allocates more virtual memory than it commits to support memory preallocation and dynamic memory management. Memory preallocation benefits performance. Dynamic memory management is the process of growing and shrinking real memory usage within separate virtual shared memory areas. To support memory preallocation and dynamic memory management effectively, data servers frequently have to allocate more virtual shared memory on a system than the amount of physical RAM. The kernel requires this value as a number of pages.
- Load performance might benefit from a larger message queue size limit, which is specified in bytes by MSGMNB. You can view message queue usage by running the ipcs -q command. If the message queues are at capacity, or reaching capacity, during load operations, consider increasing the number of bytes the message queue size limit.
# ipcs -l ------ Shared Memory Limits -------- max number of segments = 4096 // SHMMNI max seg size (kbytes) = 32768 // SHMMAX max total shared memory (kbytes) = 8388608 // SHMALL min seg size (bytes) = 1 ------ Semaphore Limits -------- max number of arrays = 1024 // SEMMNI max semaphores per array = 250 // SEMMSL max semaphores system wide = 256000 // SEMMNS max ops per semop call = 32 // SEMOPM semaphore max value = 32767 ------ Messages: Limits -------- max queues system wide = 1024 // MSGMNI max size of message (bytes) = 65536 // MSGMAX default max size of queue (bytes) = 65536 // MSGMNB
- Beginning with the first section on Shared Memory Limits, the SHMMAX limit is the maximum size of a shared memory segment on a Linux system. The SHMALL limit is the maximum allocation of shared memory pages on a system.
- It is recommended to set the SHMMAX value to be equal to the amount of physical memory on your system. However, the minimum that is required on x86 systems is 268435456 (256 MB) and for 64-bit systems, it is 1073741824 (1 GB).
- The next section covers the amount of semaphores available to the operating system. The kernel parameter semconsists of four tokens, SEMMSL, SEMMNS, SEMOPM, and SEMMNI. SEMMNS is the result of SEMMSL multiplied bySEMMNI. The database manager requires that the number of arrays (SEMMNI) be increased as necessary. Typically, SEMMNI must be twice the maximum number of agents expected on the system multiplied by the number of logical partitions on the database server computer plus the number of local application connections on the database server computer.
- The third section covers messages on the system.
- The MSGMNI parameter affects the number of agents that can be started. The MSGMAX parameter affects the size of the message that can be sent in a queue, and the MSGMNB parameter affects the size of the queue.
- The MSGMAX parameter must be changed to 64 KB (that is, 65536 bytes), and the MSGMNB parameter must be increased to 65536.
- Modify the kernel parameters that you have to adjust by editing the /etc/sysctl.conf file. If this file does not exist, create it. The following lines are examples of what must be placed into the file:
#Example for a computer with 16GB of RAM: kernel.shmmni=4096 kernel.shmmax=17179869184 kernel.shmall=8388608 #kernel.sem=<SEMMSL> <SEMMNS> <SEMOPM> <SEMMNI> kernel.sem=250 1024000 32 4096 kernel.msgmni=16384 kernel.msgmax=65536 kernel.msgmnb=65536
- Run sysctl with -p parameter to load in sysctl settings from the default file /etc/sysctl.conf:
sysctl -p
- Optional: Have the changes persist after every reboot:
- (SUSE Linux) Make boot.sysctl active.
- (Red Hat) The rc.sysinit initialization script reads the /etc/sysctl.conf file automatically.
Kernel parameters for Db2 database server installation (Linux and UNIX)
相關推薦
Kernel parameters for Db2 database server installation (Linux and UNIX)
enter settings running server ems aced esc token word Db2 11.1 For root installations, the database manager uses a formula to automatical
Top 5 Courses to Learn Shell Scripting in Linux and UNIX Online
A huge chunk of a developer's time is wasted in trying to repeat tasks and commands, especially when it comes to working with a bunch of UNIX or Linux mac
Linux and Unix ps command tutorial with examples
Tutorial on using ps, a UNIX and Linux command for reporting information on running processes. Examples of searching by user, group, executable name a
SQL Server On Linux(3)——SQL Server 2019 For Linux 下載並部署示例資料庫
接上文SQL Server On Linux(2)——SQL Server 2019 For Linux安裝過程細節研究 正所謂工欲善其事必先利其器,讀者可能也跟作者一樣很迫切希望瞭解和嘗試SQL Server On Linux及SQL 2019的各種新特性,不過為了走得
SQL Server On Linux(2)——SQL Server 2019 For Linux安裝過程細節研究
接上文SQL Server On Linux(1)——CentOS 7 安裝SQL Server2019 在安裝過程中,作者發現了一些資訊,這些資訊引起了作者的興趣,那麼下面作者把自己研究的結果分享出來,如果讀者對此有深入研究過,歡迎指正。 為什麼要研究這些東西?說白了就
SQL Server on Linux: How? Introduction: SQL Server Blog
nco adding existing initial planning for rec instance thum SQL Server Blog Official News from Microsoft’s Information Platform h
Skype for Business Edge Server邊緣服務器部署準備條件
business 服務器 skype 文章 文章鏈接:http://yangqs.com/?p=35 本文出自 “強生的博客” 博客,請務必保留此出處http://yangqs.blog.51cto.com/127876/1934728Skype for Business Edge Serve
Windows遠程連接server(Linux系統)及可視化
命令行 enter lin -1 用戶 ssi arm mar 下載文件 方法1:命令行連接後使用server上安裝好的可視化編輯器IDE: Step 1: 工具準備:putty.exe;Xming-6-9-0-31-setup.exe;Xming-fonts-7-7-
從Windows遷移SQL Server到Linux
dir 工具 創建目錄 文件目錄 stat 安裝 windows option eight 前一篇博客關於SQL Server on Linux的安裝,地址:http://www.cnblogs.com/fishparadise/p/8057650.html,現在測試把Wi
Microsoft SQL Server on Linux 踩坑指南
stat 自己 blog ext4 cat 宣傳 requires 日誌 主機 微軟用 SQL Server 在 2016 年的時候搞了一個大新聞,宣傳 Microsoft ?? Linux 打得一眾軟粉措手不及。但是這還是好事情,Linux 上也有好用的 SQL Ser
jmeter連接mysql數據庫報錯Cannot create PoolableConnectionFactory (Could not create connection to database server.)
cannot jar 嘗試 後來 連接 database 方法 java-5 驅動 今天在學習jmeter的jdbc取樣器,發現在配置完JDBC Connection Configuration和JDBC Request後,點擊運行。在查看結果樹中顯示響應數據: Canno
HiveSQLException: Error while compiling statement: No privilege 'Create' found for outputs { database:default }
sed utils erp PE ant ESS java tput 謝謝 今天用Hive的JDBC實例時出現了HiveSQLException: Error while compiling statement: No privilege ‘Create‘ found fo
java項目連接jdbc報錯:com.mysql.jdbc.exceptions.jdbc4.MySQLNonTransientConnectionException: Could not create connection to database server
image mysq reat jar包 tor ima 新版 ransient java項目 java項目連接jdbc報錯:com.mysql.jdbc.exceptions.jdbc4.MySQLNonTransientConnectionException: Coul
No toolchains found in the NDK toolchains folder for ABI with prefix: mips64el-linux-android
The 問題 lin issue androi 回來 mips lam 上傳 原文:No toolchains found in the NDK toolchains folder for ABI with prefix: mips64el-linux-android今天把
Android Studio - No toolchains found in the NDK toolchains folder for ABI with prefix: mips64el-linux-android
錯誤提示: No toolchains found in the NDK toolchains folder for ABI with prefix: mips64el-linux-android 錯誤原因:確實是缺少對應的檔案,我出現這種情況是升級了NDK之後。 解決辦法:把缺失檔案放到NDK
mysql進階(十七)Cannot Connect to Database Server
分享一下我老師大神的人工智慧教程!零基礎,通俗易懂!http://blog.csdn.net/jiangjunshow 也歡迎大家轉載本篇文章。分享知識,造福人民,實現我們中華民族偉大復興!  
Error:No toolchains found in the NDK toolchains folder for ABI with prefix: mips64el-linux-android
https://www.jianshu.com/p/fd3d49c7f1f8 通過Android Studio 的Sdk Manager安裝NDK,安裝完之後編譯失敗,報錯資訊如下: Error:No toolchains found in the NDK toolchains folder
SQL Server On Linux(1)——CentOS 7 安裝SQL Server2019
前言 SQL Server 2019已經正式公佈,雖然只是preview版,但是不影響我們追求新的技術。接下來的一個系列,隨著本人的研究,儘量讓這個系列成為“教程”,真正的入門到精通。 環境準備 不廢話,先把研究環境搭建起來。由於某些原因(晚點再說),本系列
SQL Server On Linux(4)——Linux 初步配置(1)
接上文:SQL Server On Linux(3)——SQL Server 2019 For Linux 下載並部署示例資料庫 本文聊一下Linux,因為這個系列是Linux上的SQL Server,所以我們有必要初步瞭解一下這個基石,地基不穩那麼上面搭建的東西也必然搖搖晃
Mysql8--啟動tomca時報錯Could not create connection to database server.
可能錯誤的原因有千千萬,本人出錯的原因是:資料庫用的是Mysql8版本,但工程裡面mysql驅動包卻是5.1.37版本。只需修改驅動包為8.0.11版本即可。 <!-- mysql --> <dependency> <groupId>mysql<