MySQL中mmm實現高可用群集
阿新 • • 發佈:2018-07-21
復制 use 原來 systemctl b- mark alt 刪掉 日誌文件
介紹
MMM(Master-Master replication manager for MySQL)是一套支持雙主故障切換和雙主日常管理的腳本程序。MMM使用Perl語言開發,主要用來監控和管理MySQL Master-Master(雙主)復制,可以說是mysql主主復制管理器。雖然叫做雙主復制,但是業務上同一時刻只允許對一個主進行寫入,另一臺備選主上提供部分讀服務,以加速在主主切換時刻備選主的預熱,可以說MMM這套腳本程序一方面實現了故障切換的功能,另一方面其內部附加的工具腳本也可以實現多個slave的負載均衡。
優點
高可用性,擴展性好,出現故障自動切換,對於主主同步,在同一時間只提供一臺數據庫寫操作,保證的數據的一致性。
- 缺點
Monitor節點是單點,可以結合Keepalived實現高可用。
實驗要求
兩臺主服務器master
master1:192.168.177.128
master2:192.168.177.135
兩臺從服務器slave
slave1:192.168.177.132
slave2:192.168.177.133
監控服務器monitor
monitor:192.168.177.134
配置ALI雲源,然後安裝epel-release源(四臺主從)
# wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-7.repo # yum -y install epel-release # yum clean all && yum makecache
搭建本地YUM源(四臺主從)
# yum -y install mariadb-server mariadb
# systemctl stop firewalld.service
# setenforce 0
# systemctl start mariadb.service
修改m1主配置文件
# vim /etc/my.cnf // 刪掉原來的[mysqld]9行,添加如下內容: [mysqld] log_error=/var/lib/mysql/mysql.err log=/var/lib/mysql/mysql_log.log log_slow_queries=/var/lib/mysql_slow_queris.log binlog-ignore-db=mysql,information_schema character_set_server=utf8 log_bin=mysql_bin server_id=1 log_slave_updates=true sync_binlog=1 auto_increment_increment=2 auto_increment_offset=1 ==註意==server_id要不同 # systemctl restart mariadb.service
配置主主復制-兩臺主服務器相互復制
# mysql>
# show master status; //記錄日誌文件名稱和位置值,在兩臺主上查看
在m1上為m2授予從的權限,在m2上也要為m1授予從的權限
# grant replication slave on *.* to ‘replication‘@‘192.168.177.%‘ identified by ‘123456‘; //m1上
# grant replication slave on *.* to ‘replication‘@‘192.168.177.%‘ identified by ‘123456‘;//m2上
#change master to master_host=‘192.168.177.135‘,master_user=‘replication‘,master_password=‘123456‘,master_log_file=‘mysql_bin.000001‘,master_log_pos=245;//m1上
# change master to master_host=‘192.168.177.128‘,master_user=‘replication‘,master_password=‘123456‘,master_log_file=‘mysql_bin.000001‘,master_log_pos=245;//m2上
# start slave;
# show slave status\G;
在兩臺從上做-註意日誌文件和位置參數的改變(都指向m1)
# change master to master_host=‘192.168.177.128‘,master_user=‘replication‘,master_password=‘123456‘,master_log_file=‘mysql_bin.000001‘,master_log_pos=245;
# start slave; //開啟同步
# show slave status\G;
安裝MMM(四臺主從)
# yum -y install mysql-mmm*
安裝結束後,對mmm進行配置
# cd /etc/mysql-mmm/
#vim mmm_common.conf //所有主機上都要配置,直接復制多份
<host default>
cluster_interface ens33
……
replication_user replication
replication_password 123456
agent_user mmm_agent
agent_password 123456
<host db1>
ip 192.168.177.128
mode master
peer db2
</host>
<host db2>
ip 192.168.177.135
mode master
peer db1
</host>
<host db3>
ip 192.168.177.132
mode slave
</host>
<host db4>
ip 192.168.177.133
mode slave
</host>
<role writer>
hosts db1, db2
ips 192.168.177.200 #主服務器虛擬IP
mode exclusive
</role>
<role reader>
hosts db3, db4
ips 192.168.177.20,192.168.177.30 #從服務器虛擬IP
mode balanced
</role>
在主1上面復制:
# scp mmm_common.conf [email protected]:/etc/mysql-mmm/
# scp mmm_common.conf [email protected]:/etc/mysql-mmm/
# scp mmm_common.conf [email protected]:/etc/mysql-mmm/
在monitor服務器上配置
# systemctl stop firewalld.service
# setenforce 0
# wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-7.repo
# yum -y install epel-release
# yum clean all && yum makecache
# yum -y install mysql-mmm*
# cd /etc/mysql-mmm
# vim mmm_mon.conf
<host default>
ping_ips 192.168.177.132,192.168.177.128,192.168.177.133,192.168.177.135 //四臺地址
monitor_user mmm_monitor
monitor_password 123456
auto_set_online 10
</host>
在m1上:# scp mmm_common.conf [email protected]:/etc/mysql-mmm/
在所有數據庫上為mmm_agent授權-四臺主從
# mysql>
# grant super, replication client, process on *.* to ‘mmm_agent‘@‘192.168.177.%‘ identified by ‘123456‘;
在所有數據庫上為mmm_moniter授權-四臺主從
# grant replication client on *.* to ‘mmm_monitor‘@‘192.168.177.%‘ identified by ‘123456‘;
# flush privileges;
修改所有數據庫的mmm_agent.conf-四臺主從
# vim /etc/mysql-mmm/mmm_agent.conf
this db1 //根據規劃進行逐一調整
this db2
this db3
this db4
在所有數據庫服務器上啟動mysql-mmm-agent-四臺主從
# systemctl start mysql-mmm-agent.service
# systemctl enable mysql-mmm-agent.service #開機自啟動
在monitor服務器上配置
# systemctl start mysql-mmm-monitor.service
# mmm_control show
# mmm_control checks all
# mmm_control move_role writer db2 //指定db2綁定虛擬IP
故障測試
停止m1 確認 虛擬地址 200 是否移動到 m2 上。註意:主不會搶占
# systemctl stop mariadb.service //m1上
# mmm_control show
db1(192.168.177.128) master/HARD_OFFLINE. Roles:
db2(192.168.177.135) master/ONLINE. Roles: writer(192.168.177.200)
MySQL中mmm實現高可用群集