一、上傳zk安裝包

cd /user/zookeeper (沒有zookeeper自己建立一個)
rz

二、解壓

tar -zxvf zookeeper-3.4.12.tar.gz

三、配置（先在一臺節點上配置）

1.需要把conf目錄下的 zoo_sample.cfg，改名為zoo.cfg
	[[email protected] conf]# mv zoo_sample.cfg  zoo.cfg
2.配置zoo.cfg
	在最後追加(對應自己的各個節點的ip)
		server.1=192.168.233.128:2888:3888
		server.2=192.168.233.131:2888:3888
		server.3=192.168.233.130:2888:3888
3.建立data目錄.data下在建立一個myid檔案
	[
 
[email protected] zookeeper]#  mkdir data
	[[email protected] zookeeper]# cd data/
	[[email protected] data]# echo "1">myid    (於(2.配置zoo.cfg)步驟裡的server.N對應)
	[[email protected] data]# cat myid 
	1
	[[email protected] data]# 
4.將配置好的zk拷貝到其他節點
	[[email protected] data]# scp -r /usr/zookeeper/  
 
[email protected]:/usr/zookeeper/
	[[email protected] data]# scp -r /usr/zookeeper/ [email protected]:/usr/zookeeper/
5.修改其他節點上的myid
	[[email protected] zookeeper]#  mkdir data
	[[email protected] zookeeper]# cd data/
	[[email protected] data]# echo "1">myid  

	[[email protected]
 
 zookeeper]#  mkdir data
	[[email protected] zookeeper]# cd data/
	[[email protected] data]# echo "1">myid  

四、5.8.啟動zk(3臺都要啟動)

[[email protected] zookeeper]# cd /usr/zookeeper/zookeeper-3.4.12/bin/
[[email protected] bin]# ./zkServer.sh start
	
[[email protected] zookeeper]# cd /usr/zookeeper/zookeeper-3.4.12/bin/
[[email protected] bin]# ./zkServer.sh start

[[email protected] zookeeper]# cd /usr/zookeeper/zookeeper-3.4.12/bin/
[[email protected] bin]# ./zkServer.sh start

五、5.9.Jps檢視（3臺都有）

	有 QuorumpeerMain  程序即可