CentOS7修改網絡卡名稱eth0
阿新 • • 發佈：2018-11-13
CentOS7修改網絡卡名稱eth0
我在VMWare workstation裡面安裝的centos7虛擬機器設定了2張網絡卡，網絡卡名稱預設為eno16777736、eno33554984：
[[email protected] ~]# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eno16777736: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:50:56:3a:78:ee brd ff:ff:ff:ff:ff:ff inet 192.168.128.85/24 brd 192.168.128.255 scope global eno16777736 valid_lft forever preferred_lft forever inet6 fe80::250:56ff:fe3a:78ee/64 scope link valid_lft forever preferred_lft forever 3: eno33554984: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:72:41:10 brd ff:ff:ff:ff:ff:ff inet 10.10.10.10/24 brd 10.10.10.255 scope global eno33554984 valid_lft forever preferred_lft forever inet6 fe80::20c:29ff:fe72:4110/64 scope link valid_lft forever preferred_lft forever
如果改為eth0、eth1，該如何操作呢？
1.修改配置
[[email protected] ~]# vi /etc/default/grub
GRUB_CMDLINE_LINUX 加上 net.ifnames=0 biosdevname=0 GRUB_CMDLINE_LINUX="net.ifnames=0 biosdevname=0 crashkernel=auto rd.lvm.lv=centos/root rd.lvm.lv=centos/swap rhgb quiet"
2.重新載入配置
grub2-mkconfig -o /boot/grub2/grub.cfg
[[email protected] ~]# grub2-mkconfig -o /boot/grub2/grub.cfg Generating grub configuration file ... Found linux image: /boot/vmlinuz-3.10.0-693.5.2.el7.x86_64 Found initrd image: /boot/initramfs-3.10.0-693.5.2.el7.x86_64.img Found linux image: /boot/vmlinuz-3.10.0-327.28.3.el7.x86_64 Found initrd image: /boot/initramfs-3.10.0-327.28.3.el7.x86_64.img Found linux image: /boot/vmlinuz-3.10.0-327.el7.x86_64 Found initrd image: /boot/initramfs-3.10.0-327.el7.x86_64.img Found linux image: /boot/vmlinuz-0-rescue-0ff0e879cd2f443cb90ec9afa4d66dfb Found initrd image: /boot/initramfs-0-rescue-0ff0e879cd2f443cb90ec9afa4d66dfb.img done
3.修改網絡卡名稱
[[email protected] ~]# cd /etc/sysconfig/network-scripts/ [[email protected] network-scripts]# vi ifcfg-eno16777736 修改為 NAME=eth0 DEVICE=eth0 [[email protected] network-scripts]# mv ifcfg-eno16777736 ifcfg-eth0 同樣另外一張網絡卡改為eth1
4.重啟機器
發現通過ssh連線不到 192.168.128.85
進入vmware控制檯檢視，還是顯示原網絡卡名稱，再檢視網路服務狀態，顯示failed
如何解決？
進入目錄 /etc/udev/rules.d/ [[email protected] ~]# cd /etc/udev/rules.d/ 檢視 90-eno-pix.rules # This file was automatically generated on systemd update SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:50:56:3a:78:ee", NAME="eno16777736" SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:72:41:10", NAME="eno33554984"
看到還是之前的網絡卡名稱
刪掉此檔案，或者改為正確的網絡卡名稱，注意和mac對應，然後重啟機器
這次成功了
[[email protected] ~]# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:50:56:3a:78:ee brd ff:ff:ff:ff:ff:ff inet 192.168.128.85/24 brd 192.168.128.255 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::250:56ff:fe3a:78ee/64 scope link valid_lft forever preferred_lft forever 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:72:41:10 brd ff:ff:ff:ff:ff:ff inet 10.10.10.10/24 brd 10.10.10.255 scope global eth1 valid_lft forever preferred_lft forever inet6 fe80::20c:29ff:fe72:4110/64 scope link valid_lft forever preferred_lft forever