2-1對於在VMware克隆虛擬機器centOSLinux的時候,找不到IP地址的解決辦法
阿新 • • 發佈:2018-12-03
我們在VMware克隆虛擬機器centOSLinux的時候,找不到IP地址,如圖。
開啟閘道器會報錯
Device eth0 does not seem to be present,delaying initialization.
重啟閘道器也會報錯
重點內容 解決
開啟/etc/udev/rules.d/70-persistent-net.rules
vim /etc/udev/rules.d/70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules # program, run by the persistent-net-generator.rules rules file. # # You can modify it, as long as you keep each rule on a single # line, and change only the value of the NAME= key. # PCI device 0x8086:0x100f (e100) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:bf:b3:cc", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" # PCI device 0x1022:0x2000 (pcnet32) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:ba:64:79", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1" 1
此時,我們需要記錄eth1的mac地址 00:0c:29:ba:64:79
開啟/etc/sysconfig/network-scripts/ifcfg-eth0
vim /etc/sysconfig/network-scripts/ifcfg-eth0
將 DEVICE=eth0 改成 DEVICE=eth1 ,
將 HWADDR 改成上面的mac地址 HWADDR=00:0c:29:ba:64:79
最後重啟網路
service network restart
檢視IP地址
OK ,成功可以獲取到IP地址啦,開心心