1. 程式人生 > >PHP版本升級:從php7.1升級到php7.2

PHP版本升級:從php7.1升級到php7.2

檢視現在PHP的版本

$ php -v
PHP 7.1.2 (cli) (built: Mar 11 2017 23:57:39) ( NTS )
Copyright (c) 1997-2017 The PHP Group
Zend Engine v3.1.0, Copyright (c) 1998-2017 Zend Technologies

下載並安裝最新版PHP7.2.4:
檢視PHP最新版本, 目前最新穩定版是2018年3月29日釋出的PHP 7.2.4:

$ cd /opt
$ wget http://am1.php.net/get/php-7.2.4.tar.xz/from/this/mirror php-7.2.4.tar.xz 
$ xz -d php-7.2.4.tar.xz 
$ tar -xvf php-7.2.4.tar 

檢視上個安裝版本的配置

$ mv php7.2.4 php7.2
$ cd php7.2
$ php -i | grep configure

格式一下命令,之前使用反斜線()執行的命令,顯示成了單引號, 再將 單引號轉換成 反斜線, 具體配置命令如下:

 ./configure  --prefix=/opt/php7.2 \
 --with-config-file-path=/opt/php7.2/etc \
 --with-config-file-scan-dir=/opt/php7.2/etc/php.d \
 --with-mcrypt=/usr/include \
 --enable-mysqlnd \
 --with-mysqli \
 --with-pdo-mysql \
 --enable-fpm \
 --with-fpm-user=nginx \
 --with-fpm-group=nginx \
 --with-gd \
 --with-iconv \
 --with-zlib \
 --enable-xml \
 --enable-shmop \
 --enable-sysvsem \
 --enable-inline-optimization \
 --enable-mbregex \
 --enable-mbstring \
 --enable-ftp \
 --enable-gd-native-ttf \
 --with-openssl \
 --enable-pcntl \
 --enable-sockets \
 --with-xmlrpc \
 --enable-zip \
 --enable-soap \
 --without-pear \
 --with-gettext \
 --enable-session \
 --with-curl \
 --with-jpeg-dir \
 --with-freetype-dir \
 --enable-opcache \
 --with-mhash

稍等一會,等配置執行完畢後,再接著編譯和安裝命令,執行:

$ make 

$ make install

使用全路徑檢視php版本:

$ /opt/php7.2/bin/php -v
PHP 7.2.4 (cli) (built: Apr  7 2018 16:51:41) ( NTS )
Copyright (c) 1997-2018 The PHP Group
Zend Engine v3.2.0, Copyright (c) 1998-2018 Zend Technologies

刪除原來的軟連線,建立新軟連線到/usr/local/bin/目錄:

$ rm /usr/local/bin/php*
$ sudo ln -s /opt/php7.2/bin/php*  /usr/local/bin/

現在 php -v 就可以看到新版本了:

$ php -v
PHP 7.2.4 (cli) (built: Apr  7 2018 16:51:41) ( NTS )
Copyright (c) 1997-2018 The PHP Group
Zend Engine v3.2.0, Copyright (c) 1998-2018 Zend Technologies

複製原來的配置檔案到新的目錄:

$ cp /opt/php7/etc/php-fpm.conf /opt/php7.2/etc/php-fpm.conf
$ cp /opt/php7/etc/php-fpm.d/www.conf /opt/php7.2/etc/php-fpm.d/www.conf
php-fpm.conf
[global]
log_level = error
pid = /opt/php7.2/var/run/php-fpm.pid
error_log = /data/php7.2/log/php-fpm.log

[www]
user = php
group = php
listen =/opt/php7.2/var/run/php-fpm.sock
listen.backlog = 4096
pm = dynamic
rlimit_files = 65535
pm.max_children = 2000
pm.max_requests = 20000
pm.start_servers = 200
pm.min_spare_servers = 60
pm.max_spare_servers = 500
request_terminate_timeout = 120
request_slowlog_timeout = 2s
pm.status_path = /php_status
slowlog = /data/php7.2/log/php-fpm-slow.log

php-fpm.conf.default
;;;;;;;;;;;;;;;;;;;;;
; FPM Configuration ;
;;;;;;;;;;;;;;;;;;;;;

; All relative paths in this configuration file are relative to PHP's install
; prefix (/opt/php7). This prefix can be dynamically changed by using the
; '-p' argument from the command line.

;;;;;;;;;;;;;;;;;;
; Global Options ;
;;;;;;;;;;;;;;;;;;

[global]
; Pid file
; Note: the default prefix is /opt/php7/var
; Default Value: none
;pid = run/php-fpm.pid

; Error log file
; If it's set to "syslog", log is sent to syslogd instead of being written
; in a local file.
; Note: the default prefix is /opt/php7/var
; Default Value: log/php-fpm.log
;error_log = log/php-fpm.log

; syslog_facility is used to specify what type of program is logging the
; message. This lets syslogd specify that messages from different facilities
; will be handled differently.
; See syslog(3) for possible values (ex daemon equiv LOG_DAEMON)
; Default Value: daemon
;syslog.facility = daemon

; syslog_ident is prepended to every message. If you have multiple FPM
; instances running on the same server, you can change the default value
; which must suit common needs.
; Default Value: php-fpm
;syslog.ident = php-fpm

; Log level
; Possible Values: alert, error, warning, notice, debug
; Default Value: notice
;log_level = notice

; If this number of child processes exit with SIGSEGV or SIGBUS within the time
; interval set by emergency_restart_interval then FPM will restart. A value
; of '0' means 'Off'.
; Default Value: 0
;emergency_restart_threshold = 0

; Interval of time used by emergency_restart_interval to determine when
; a graceful restart will be initiated.  This can be useful to work around
; accidental corruptions in an accelerator's shared memory.
; Available Units: s(econds), m(inutes), h(ours), or d(ays)
; Default Unit: seconds
; Default Value: 0
;emergency_restart_interval = 0

; Time limit for child processes to wait for a reaction on signals from master.
; Available units: s(econds), m(inutes), h(ours), or d(ays)
; Default Unit: seconds
; Default Value: 0
;process_control_timeout = 0

; The maximum number of processes FPM will fork. This has been design to control
; the global number of processes when using dynamic PM within a lot of pools.
; Use it with caution.
; Note: A value of 0 indicates no limit
; Default Value: 0
; process.max = 128

; Specify the nice(2) priority to apply to the master process (only if set)
; The value can vary from -19 (highest priority) to 20 (lower priority)
; Note: - It will only work if the FPM master process is launched as root
;       - The pool process will inherit the master process priority
;         unless it specified otherwise
; Default Value: no set
; process.priority = -19

; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging.
; Default Value: yes
;daemonize = yes

; Set open file descriptor rlimit for the master process.
; Default Value: system defined value
;rlimit_files = 1024

; Set max core size rlimit for the master process.
; Possible Values: 'unlimited' or an integer greater or equal to 0
; Default Value: system defined value
;rlimit_core = 0

; Specify the event mechanism FPM will use. The following is available:
; - select     (any POSIX os)
; - poll       (any POSIX os)
; - epoll      (linux >= 2.5.44)
; - kqueue     (FreeBSD >= 4.1, OpenBSD >= 2.9, NetBSD >= 2.0)
; - /dev/poll  (Solaris >= 7)
; - port       (Solaris >= 10)
; Default Value: not set (auto detection)
;events.mechanism = epoll

; When FPM is build with systemd integration, specify the interval,
; in second, between health report notification to systemd.
; Set to 0 to disable.
; Available Units: s(econds), m(inutes), h(ours)
; Default Unit: seconds
; Default value: 10
;systemd_interval = 10

;;;;;;;;;;;;;;;;;;;;
; Pool Definitions ;
;;;;;;;;;;;;;;;;;;;;

; Multiple pools of child processes may be started with different listening
; ports and different management options.  The name of the pool will be
; used in logs and stats. There is no limitation on the number of pools which
; FPM can handle. Your system will tell you anyway :)

; Include one or more files. If glob(3) exists, it is used to include a bunch of
; files from a glob(3) pattern. This directive can be used everywhere in the
; file.
; Relative path can also be used. They will be prefixed by:
;  - the global prefix if it's been set (-p argument)
;  - /opt/php7 otherwise
include=/opt/php7.2/etc/php-fpm.d/*.conf

/etc/php-fpm.d/www.conf.default
; Start a new pool named 'www'.
; the variable $pool can we used in any directive and will be replaced by the
; pool name ('www' here)
[www]

; Per pool prefix
; It only applies on the following directives:
; - 'access.log'
; - 'slowlog'
; - 'listen' (unixsocket)
; - 'chroot'
; - 'chdir'
; - 'php_values'
; - 'php_admin_values'
; When not set, the global prefix (or /opt/php7) applies instead.
; Note: This directive can also be relative to the global prefix.
; Default Value: none
;prefix = /path/to/pools/$pool

; Unix user/group of processes
; Note: The user is mandatory. If the group is not set, the default user's group
;       will be used.
user = nginx
group = nginx

; The address on which to accept FastCGI requests.
; Valid syntaxes are:
;   'ip.add.re.ss:port'    - to listen on a TCP socket to a specific IPv4 address on
;                            a specific port;
;   '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on
;                            a specific port;
;   'port'                 - to listen on a TCP socket to all addresses
;                            (IPv6 and IPv4-mapped) on a specific port;
;   '/path/to/unix/socket' - to listen on a unix socket.
; Note: This value is mandatory.
listen = 127.0.0.1:9000

; Set listen(2) backlog.
; Default Value: 511 (-1 on FreeBSD and OpenBSD)
;listen.backlog = 511

; Set permissions for unix socket, if one is used. In Linux, read/write
; permissions must be set in order to allow connections from a web server. Many
; BSD-derived systems allow connections regardless of permissions.
; Default Values: user and group are set as the running user
;                 mode is set to 0660
;listen.owner = nginx
;listen.group = nginx
;listen.mode = 0660
; When POSIX Access Control Lists are supported you can set them using
; these options, value is a comma separated list of user/group names.
; When set, listen.owner and listen.group are ignored
;listen.acl_users =
;listen.acl_groups =

; List of addresses (IPv4/IPv6) of FastCGI clients which are allowed to connect.
; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
; must be separated by a comma. If this value is left blank, connections will be
; accepted from any ip address.
; Default Value: any
;listen.allowed_clients = 127.0.0.1

; Specify the nice(2) priority to apply to the pool processes (only if set)
; The value can vary from -19 (highest priority) to 20 (lower priority)
; Note: - It will only work if the FPM master process is launched as root
;       - The pool processes will inherit the master process priority
;         unless it specified otherwise
; Default Value: no set
; process.priority = -19

; Choose how the process manager will control the number of child processes.
; Possible Values:
;   static  - a fixed number (pm.max_children) of child processes;
;   dynamic - the number of child processes are set dynamically based on the
;             following directives. With this process management, there will be
;             always at least 1 children.
;             pm.max_children      - the maximum number of children that can
;                                    be alive at the same time.
;             pm.start_servers     - the number of children created on startup.
;             pm.min_spare_servers - the minimum number of children in 'idle'
;                                    state (waiting to process). If the number
;                                    of 'idle' processes is less than this
;                                    number then some children will be created.
;             pm.max_spare_servers - the maximum number of children in 'idle'
;                                    state (waiting to process). If the number
;                                    of 'idle' processes is greater than this
;                                    number then some children will be killed.
;  ondemand - no children are created at startup. Children will be forked when
;             new requests will connect. The following parameter are used:
;             pm.max_children           - the maximum number of children that
;                                         can be alive at the same time.
;             pm.process_idle_timeout   - The number of seconds after which
;                                         an idle process will be killed.
; Note: This value is mandatory.
pm = dynamic

; The number of child processes to be created when pm is set to 'static' and the
; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'.
; This value sets the limit on the number of simultaneous requests that will be
; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
; CGI. The below defaults are based on a server without much resources. Don't
; forget to tweak pm.* to fit your needs.
; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'
; Note: This value is mandatory.
pm.max_children = 5

; The number of child processes created on startup.
; Note: Used only when pm is set to 'dynamic'
; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
pm.start_servers = 2

; The desired minimum number of idle server processes.
; Note: Used only when pm is set to 'dynamic'
; Note: Mandatory when pm is set to 'dynamic'
pm.min_spare_servers = 1

; The desired maximum number of idle server processes.
; Note: Used only when pm is set to 'dynamic'
; Note: Mandatory when pm is set to 'dynamic'
pm.max_spare_servers = 3

; The number of seconds after which an idle process will be killed.
; Note: Used only when pm is set to 'ondemand'
; Default Value: 10s
;pm.process_idle_timeout = 10s;

; The number of requests each child process should execute before respawning.
; This can be useful to work around memory leaks in 3rd party libraries. For
; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
; Default Value: 0
;pm.max_requests = 500

; The URI to view the FPM status page. If this value is not set, no URI will be
; recognized as a status page. It shows the following informations:
;   pool                 - the name of the pool;
;   process manager      - static, dynamic or ondemand;
;   start time           - the date and time FPM has started;
;   start since          - number of seconds since FPM has started;
;   accepted conn        - the number of request accepted by the pool;
;   listen queue         - the number of request in the queue of pending
;                          connections (see backlog in listen(2));
;   max listen queue     - the maximum number of requests in the queue
;                          of pending connections since FPM has started;
;   listen queue len     - the size of the socket queue of pending connections;
;   idle processes       - the number of idle processes;
;   active processes     - the number of active processes;
;   total processes      - the number of idle + active processes;
;   max active processes - the maximum number of active processes since FPM
;                          has started;
;   max children reached - number of times, the process limit has been reached,
;                          when pm tries to start more children (works only for
;                          pm 'dynamic' and 'ondemand');
; Value are updated in real time.
; Example output:
;   pool:                 www
;   process manager:      static
;   start time:           01/Jul/2011:17:53:49 +0200
;   start since:          62636
;   accepted conn:        190460
;   listen queue:         0
;   max listen queue:     1
;   listen queue len:     42
;   idle processes:       4
;   active processes:     11
;   total processes:      15
;   max active processes: 12
;   max children reached: 0
;
; By default the status page output is formatted as text/plain. Passing either
; 'html', 'xml' or 'json' in the query string will return the corresponding
; output syntax. Example:
;   http://www.foo.bar/status
;   http://www.foo.bar/status?json
;   http://www.foo.bar/status?html
;   http://www.foo.bar/status?xml
;
; By default the status page only outputs short status. Passing 'full' in the
; query string will also return status for each pool process.
; Example:
;   http://www.foo.bar/status?full
;   http://www.foo.bar/status?json&full
;   http://www.foo.bar/status?html&full
;   http://www.foo.bar/status?xml&full
; The Full status returns for each process:
;   pid                  - the PID of the process;
;   state                - the state of the process (Idle, Running, ...);
;   start time           - the date and time the process has started;
;   start since          - the number of seconds since the process has started;
;   requests             - the number of requests the process has served;
;   request duration     - the duration in µs of the requests;
;   request method       - the request method (GET, POST, ...);
;   request URI          - the request URI with the query string;
;   content length       - the content length of the request (only with POST);
;   user                 - the user (PHP_AUTH_USER) (or '-' if not set);
;   script               - the main script called (or '-' if not set);
;   last request cpu     - the %cpu the last request consumed
;                          it's always 0 if the process is not in Idle state
;                          because CPU calculation is done when the request
;                          processing has terminated;
;   last request memory  - the max amount of memory the last request consumed
;                          it's always 0 if the process is not in Idle state
;                          because memory calculation is done when the request
;                          processing has terminated;
; If the process is in Idle state, then informations are related to the
; last request the process has served. Otherwise informations are related to
; the current request being served.
; Example output:
;   ************************
;   pid:                  31330
;   state:                Running
;   start time:           01/Jul/2011:17:53:49 +0200
;   start since:          63087
;   requests:             12808
;   request duration:     1250261
;   request method:       GET
;   request URI:          /test_mem.php?N=10000
;   content length:       0
;   user:                 -
;   script:               /home/fat/web/docs/php/test_mem.php
;   last request cpu:     0.00
;   last request memory:  0
;
; Note: There is a real-time FPM status monitoring sample web page available
;       It's available in: /opt/php7/share/php/fpm/status.html
;
; Note: The value must start with a leading slash (/). The value can be
;       anything, but it may not be a good idea to use the .php extension or it
;       may conflict with a real PHP file.
; Default Value: not set
;pm.status_path = /status

; The ping URI to call the monitoring page of FPM. If this value is not set, no
; URI will be recognized as a ping page. This could be used to test from outside
; that FPM is alive and responding, or to
; - create a graph of FPM availability (rrd or such);
; - remove a server from a group if it is not responding (load balancing);
; - trigger alerts for the operating team (24/7).
; Note: The value must start with a leading slash (/). The value can be
;       anything, but it may not be a good idea to use the .php extension or it
;       may conflict with a real PHP file.
; Default Value: not set
;ping.path = /ping

; This directive may be used to customize the response of a ping request. The
; response is formatted as text/plain with a 200 response code.
; Default Value: pong
;ping.response = pong

; The access log file
; Default: not set
;access.log = log/$pool.access.log

; The access log format.
; The following syntax is allowed
;  %%: the '%' character
;  %C: %CPU used by the request
;      it can accept the following format:
;      - %{user}C for user CPU only
;      - %{system}C for system CPU only
;      - %{total}C  for user + system CPU (default)
;  %d: time taken to serve the request
;      it can accept the following format:
;      - %{seconds}d (default)
;      - %{miliseconds}d
;      - %{mili}d
;      - %{microseconds}d
;      - %{micro}d
;  %e: an environment variable (same as $_ENV or $_SERVER)
;      it must be associated with embraces to specify the name of the env
;      variable. Some exemples:
;      - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e
;      - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e
;  %f: script filename
;  %l: content-length of the request (for POST request only)
;  %m: request method
;  %M: peak of memory allocated by PHP
;      it can accept the following format:
;      - %{bytes}M (default)
;      - %{kilobytes}M
;      - %{kilo}M
;      - %{megabytes}M
;      - %{mega}M
;  %n: pool name
;  %o: output header
;      it must be associated with embraces to specify the name of the header:
;      - %{Content-Type}o
;      - %{X-Powered-By}o
;      - %{Transfert-Encoding}o
;      - ....
;  %p: PID of the child that serviced the request
;  %P: PID of the parent of the child that serviced the request
;  %q: the query string
;  %Q: the '?' character if query string exists
;  %r: the request URI (without the query string, see %q and %Q)
;  %R: remote IP address
;  %s: status (response code)
;  %t: server time the request was received
;      it can accept a strftime(3) format:
;      %d/%b/%Y:%H:%M:%S %z (default)
;      The strftime(3) format must be encapsuled in a %{<strftime_format>}t tag
;      e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t
;  %T: time the log has been written (the request has finished)
;      it can accept a strftime(3) format:
;      %d/%b/%Y:%H:%M:%S %z (default)
;      The strftime(3) format must be encapsuled in a %{<strftime_format>}t tag
;      e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t
;  %u: remote user
;
; Default: "%R - %u %t \"%m %r\" %s"
;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%"

; The log file for slow requests
; Default Value: not set
; Note: slowlog is mandatory if request_slowlog_timeout is set
;slowlog = log/$pool.log.slow

; The timeout for serving a single request after which a PHP backtrace will be
; dumped to the 'slowlog' file. A value of '0s' means 'off'.
; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
; Default Value: 0
;request_slowlog_timeout = 0

; The timeout for serving a single request after which the worker process will
; be killed. This option should be used when the 'max_execution_time' ini option
; does not stop script execution for some reason. A value of '0' means 'off'.
; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
; Default Value: 0
;request_terminate_timeout = 0

; Set open file descriptor rlimit.
; Default Value: system defined value
;rlimit_files = 1024

; Set max core size rlimit.
; Possible Values: 'unlimited' or an integer greater or equal to 0
; Default Value: system defined value
;rlimit_core = 0

; Chroot to this directory at the start. This value must be defined as an
; absolute path. When this value is not set, chroot is not used.
; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
; of its subdirectories. If the pool prefix is not set, the global prefix
; will be used instead.
; Note: chrooting is a great security feature and should be used whenever
;       possible. However, all PHP paths will be relative to the chroot
;       (error_log, sessions.save_path, ...).
; Default Value: not set
;chroot =

; Chdir to this directory at the start.
; Note: relative path can be used.
; Default Value: current directory or / when chroot
;chdir = /var/www

; Redirect worker stdout and stderr into main error log. If not set, stdout and
; stderr will be redirected to /dev/null according to FastCGI specs.
; Note: on highloaded environement, this can cause some delay in the page
; process time (several ms).
; Default Value: no
;catch_workers_output = yes

; Clear environment in FPM workers
; Prevents arbitrary environment variables from reaching FPM worker processes
; by clearing the environment in workers before env vars specified in this
; pool configuration are added.
; Setting to "no" will make all environment variables available to PHP code
; via getenv(), $_ENV and $_SERVER.
; Default Value: yes
;clear_env = no

; Limits the extensions of the main script FPM will allow to parse. This can
; prevent configuration mistakes on the web server side. You should only limit
; FPM to .php extensions to prevent malicious users to use other extensions to
; exectute php code.
; Note: set an empty value to allow all extensions.
; Default Value: .php
;security.limit_extensions = .php .php3 .php4 .php5 .php7

; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
; the current environment.
; Default Value: clean env
;env[HOSTNAME] = $HOSTNAME
;env[PATH] = /usr/local/bin:/usr/bin:/bin
;env[TMP] = /tmp
;env[TMPDIR] = /tmp
;env[TEMP] = /tmp

; Additional php.ini defines, specific to this pool of workers. These settings
; overwrite the values previously defined in the php.ini. The directives are the
; same as the PHP SAPI:
;   php_value/php_flag             - you can set classic ini defines which can
;                                    be overwritten from PHP call 'ini_set'.
;   php_admin_value/php_admin_flag - these directives won't be overwritten by
;                                     PHP call 'ini_set'
; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.

; Defining 'extension' will load the corresponding shared extension from
; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
; overwrite previously defined php.ini values, but will append the new value
; instead.

; Note: path INI options can be relative and will be expanded with the prefix
; (pool, global or /opt/php7)

; Default Value: nothing is defined by default except the values in php.ini and
;                specified at startup with the -d argument
;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f [email protected]
;php_flag[display_errors] = off
;php_admin_value[error_log] = /var/log/fpm-php.www.log
;php_admin_flag[log_errors] = on
;php_admin_value[memory_limit] = 32M


php.ini
extension_dir=/opt/php7.2/lib/php/extensions/no-debug-non-zts-20151012
expose_php = Off
short_open_tag = Off
cgi.check_shebang_line = Off
cgi.fix_pathinfo = 0
cgi.redirect_status_env = 200
register_argc_argv = Off
date.timezone = Asia/Shanghai
log_errors = On
error_log = /opt/php7.2/var/log/php.log
error_reporting = E_ALL & ~E_DEPRECATED
display_errors = Off
html_errors = Off
mbstring.internal_encoding = UTF-8
mbstring.detect_order = UTF-8,ASCII
output_buffering = 4096
request_order = GP
variables_order = GPCS
zlib.output_compression = Off
zlib.output_compression_level = 1
max_input_time = 60
mysqli.default_port = 33066
default_mimetype = ""
session.gc_maxlifetime = 86400
default_socket_timeout = 120
zend.multibyte = 1
memory_limit = 4096M
upload_max_filesize = 200M
post_max_size  = 200M
max_execution_time = 300
max_input_vars = 3000


zend_extension=opcache.so
opcache.enable=1
opcache.enable_cli=1
opcache.huge_code_pages=1
;zend_extension = /opt/php/lib/php/20100525/opcache.so
;opcache.enable_cli = 1
;opcache.memory_consumption = 128
;opcache.interned_strings_buffer = 8
;opcache.max_accelerated_files = 4000
;opcache.revalidate_freq = 60
;opcache.fast_shutdown = 1
;opcache.save_comments = 0

;opcache.enable_cli = 1
;opcache.fast_shutdown = 1
;opcache.memory_consumption = 128
;opcache.interned_strings_buffer = 8
;opcache.max_accelerated_files = 4000
;opcache.revalidate_freq = 60

extension = bcmath.so
extension = calendar.so
extension = protobuf.so
extension = phpng_xhprof.so
extension = swoole.so
;extension = curl.so
extension = yac.so
extension = mongodb.so
extension = yaf.so
extension = mycrypt.so
extension = msgpack.so
extension = apcu.so
;extension = json.so
;extension = mbstring.so
;extension = mcrypt.so
;extension = mysqlnd.so
;extension = mysqli.so
;extension = pdo.so
;extension = pdo_mysql.so
;extension = simplexml.so
;extension = sockets.so
;extension = xml.so
extension = redis.so
;extension = gd.so
;extension = soap.so
;extension = memcached.so
;extension = mongo.so
;extension = openssl.so
;; this is an example, it won't work unless properly configured into php.ini
[xcache-common]
;; non-Windows example:
;extension = xcache.so
;; Windows example:
; extension = php_xcache.dll

[xcache.admin]
xcache.admin.enable_auth = On
xcache.admin.user = "xcache"
; set xcache.admin.pass = md5($your_password)
; login use $your_password
xcache.admin.pass = "451b840b82545cbcdef913321f36a938"

[xcache]
; ini only settings, all the values here is default unless explained

; select low level shm implemenation
xcache.shm_scheme =        "mmap"
; to disable: xcache.size=0
; to enable : xcache.size=64M etc (any size > 0) and your system mmap allows
xcache.size  =               60M
; set to cpu count (cat /proc/cpuinfo |grep -c processor)
xcache.count =                 1
; just a hash hints, you can always store count(items) > slots
xcache.slots =                8K
; ttl of the cache item, 0=forever
xcache.ttl   =                 0
; interval of gc scanning expired items, 0=no scan, other values is in seconds
xcache.gc_interval =           0

; same as aboves but for variable cache
xcache.var_size  =            4M
xcache.var_count =             1
xcache.var_slots =            8K
; default value for $ttl parameter of xcache_*() functions
xcache.var_ttl   =             0
; hard limit ttl that cannot be exceed by xcache_*() functions. 0=unlimited
xcache.var_maxttl   =          0
xcache.var_gc_interval =     300

; mode:0, const string specified by xcache.var_namespace
; mode:1, $_SERVER[xcache.var_namespace]
; mode:2, uid or gid (specified by xcache.var_namespace)
xcache.var_namespace_mode =    0
xcache.var_namespace =        ""

; N/A for /dev/zero
xcache.readonly_protection = Off
; for *nix, xcache.mmap_path is a file path, not directory. (auto create/overwrite)
; Use something like "/tmp/xcache" instead of "/dev/*" if you want to turn on ReadonlyProtection
; different process group of php won't share the same /tmp/xcache
; for win32, xcache.mmap_path=anonymous map name, not file path
xcache.mmap_path =    "/dev/zero"


; Useful when XCache crash. leave it blank(disabled) or "/tmp/phpcore/" (writable by php)
xcache.coredump_directory =   ""
; Windows only. leave it as 0 (default) until you're told by XCache dev
xcache.coredump_type =         0

; disable cache after crash
xcache.disable_on_crash =    Off

; enable experimental documented features for each release if available
xcache.experimental =        Off

; per request settings. can ini_set, .htaccess etc
xcache.cacher =               On
xcache.stat   =               On
xcache.optimizer =           Off

[xcache.coverager]
; enabling this feature will impact performance
; enabled only if xcache.coverager == On && xcache.coveragedump_directory == "non-empty-value"

; per request settings. can ini_set, .htaccess etc
; enable coverage data collecting and xcache_coverager_start/stop/get/clean() functions
xcache.coverager =           Off
xcache.coverager_autostart =  On

; set in php ini file only
; make sure it's readable (open_basedir is checked) by coverage viewer script
xcache.coveragedump_directory = ""
sys_temp_dir=/tmp

;mongodb.debug=/tmp/mongo-debug-two/

重啟
使用 ps 檢視php程序,使用 kill 結束開啟中的php程序, 再重啟php-fpm:

$ ps -ef |grep php
$ sudo kill -9 2719
$ sudo /opt/php7.2/sbin/php-fpm

附上php啟動指令碼

/etc/init.d/php7
#!/bin/sh
#
# chkconfig: 2345 84 16
# description: PHP FastCGI Process Manager
# processname: php-fpm
# config: /etc/php/php-fpm.conf
# pidfile: /var/run/php-fpm.pid

# Standard LSB functions
#. /lib/lsb/init-functions

# Source function library.
. /etc/init.d/functions

# Check that networking is up.
. /etc/sysconfig/network

if [ "$NETWORKING" = "no" ]
then
    exit 0
fi

RETVAL=0
prog="php-fpm"
pidfile=${PIDFILE-/opt/php7.2/var/run/php-fpm.pid}
lockfile=${LOCKFILE-/var/lock/subsys/php-fpm}

start () {
    echo -n $"Starting $prog: "
    daemon --pidfile ${pidfile} /opt/php7.2/sbin/php-fpm
    RETVAL=$?
    echo
    [ $RETVAL -eq 0 ] && touch ${lockfile}
    chmod 666 /opt/php7.2/var/run/php-fpm.sock
}
stop () {
    echo -n $"Stopping $prog: "
    killproc -p ${pidfile} php-fpm
    RETVAL=$?
    echo
    if [ $RETVAL -eq 0 ] ; then
        rm -f ${lockfile} ${pidfile}
    fi
}

restart () {
        stop
        start
}

reload () {
    echo -n $"Reloading $prog: "
    killproc -p ${pidfile} php-fpm -USR2
    RETVAL=$?
    echo
}


# See how we were called.
case "$1" in
  start)
    start
    ;;
  stop)
    stop
    ;;
  status)
    status -p ${pidfile} php-fpm
    RETVAL=$?
    ;;
  restart)
    restart
    ;;
  reload|force-reload)
    reload
    ;;
  condrestart|try-restart)
    [ -f ${lockfile} ] && restart || :
    ;;
  *)
    echo $"Usage: $0 {start|stop|status|restart|reload|force-reload|condrestart|try-restart}"
    RETVAL=2
        ;;
esac

exit $RETVAL