juniper srx 240 cluster 內網服務器端口發布到外網配置實例
-----------------------------------------內網地址端口發布到外網步驟-----------------------------------------------------
set security address-book global address IMMQI_PRIVATE 172.22.201.20/32
步驟一：創建 NAT pool
set security nat destination pool DP_TRUST_IMMQI_10089 address port 10089
步驟二：創建 NAT Rule
set security nat destination rule-set DNAT_FROM_ISP1 rule ISP1_TCP10089_TO_IMMQI_10089 match destination-address-name WAN3001_241 -----119.145.16.241
set security nat destination rule-set DNAT_FROM_ISP1 rule ISP1_TCP10089_TO_IMMQI_10089 then destination-nat pool DP_TRUST_IMMQI_10089
步驟三：創建放行端口及協議類型
set applications application tcp-10089 protocol tcp
set applications application tcp-10090 protocol tcp
set applications application tcp-10090 destination-port 10090
步驟四：創建區域策略，並具體匹配源地址和目標地址端口
set security policies from-zone ISP1 to-zone trust policy P_IMMQI_80_9998 match source-address any
set security policies from-zone ISP1 to-zone trust policy P_IMMQI_80_9998 match destination-address IMMQI_PRIVATE
set security policies from-zone ISP1 to-zone trust policy P_IMMQI_80_9998 match application tcp-80
set security policies from-zone ISP1 to-zone trust policy P_IMMQI_80_9998 match application tcp-9998
set security policies from-zone ISP1 to-zone trust policy P_IMMQI_80_9998 match application tcp-10089
set security policies from-zone ISP1 to-zone trust policy P_IMMQI_80_9998 then permit
set security policies from-zone ISP1 to-zone trust policy P_IMMQI_80_9998 then log session-init
set security policies from-zone ISP1 to-zone trust policy P_IMMQI_80_9998 then log session-close
步驟五：如果新建協議，則需要調整策略優先級
insert security policies from-zone Design to-zone trust policy RM-201_84-Cost-Lectra before policy DENY ----新增加策略需要檢查是否需要修改策略優先級
set security address-book global address QI_PRIVATE 172.22.201.19/32
正式環境
set security nat destination pool DP_TRUST_IQCSAP_10090 address 172.22.201.19/32
set security nat destination pool DP_TRUST_IQCSAP_10090 address port 10089
ISP1電信線路
set security nat destination rule-set DNAT_FROM_ISP1 rule ISP1_TO_TRUST_IQCSAP_10090 match destination-address-name WAN3001_241
set security nat destination rule-set DNAT_FROM_ISP1 rule ISP1_TO_TRUST_IQCSAP_10090 match destination-port 10090
set security nat destination rule-set DNAT_FROM_ISP1 rule ISP1_TO_TRUST_IQCSAP_10090 then destination-nat pool DP_TRUST_IQCSAP_10090
set security policies from-zone ISP1 to-zone trust policy P_IQCSAP_10090 match source-address any
set security policies from-zone ISP1 to-zone trust policy P_IQCSAP_10090 match destination-address QI_PRIVATE
set security policies from-zone ISP1 to-zone trust policy P_IQCSAP_10090 match application tcp-10089
set security policies from-zone ISP1 to-zone trust policy P_IQCSAP_10090 then permit
set security policies from-zone ISP1 to-zone trust policy P_IQCSAP_10090 then log session-init
set security policies from-zone ISP1 to-zone trust policy P_IQCSAP_10090 then log session-close
set security policies from-zone ISP1 to-zone trust policy P_IQCSAP_10090 then count
ISP6 聯通線路
set security nat destination rule-set DNAT_FROM_ISP6 rule ISP6_TO_TRUST_IQCSAP_10090 match destination-address-name WAN3006_165
set security nat destination rule-set DNAT_FROM_ISP6 rule ISP6_TO_TRUST_IQCSAP_10090 match destination-port 10090
set security nat destination rule-set DNAT_FROM_ISP6 rule ISP6_TO_TRUST_IQCSAP_10090 then destination-nat pool DP_TRUST_IQCSAP_10090
set security policies from-zone ISP6 to-zone trust policy P_IQCSAP_10090 match source-address any
set security policies from-zone ISP6 to-zone trust policy P_IQCSAP_10090 match destination-address QI_PRIVATE
set security policies from-zone ISP6 to-zone trust policy P_IQCSAP_10090 match application tcp-10089
set security policies from-zone ISP6 to-zone trust policy P_IQCSAP_10090 then permit
set security policies from-zone ISP6 to-zone trust policy P_IQCSAP_10090 then log session-init
set security policies from-zone ISP6 to-zone trust policy P_IQCSAP_10090 then log session-close
set security policies from-zone ISP6 to-zone trust policy P_IQCSAP_10090 then count
insert security policies from-zone ISP6 to-zone trust policy P_IQCSAP_10090 before policy DENY
驗證
{primary:node0}
[email protected]> show security flow session nat destination-port 10090
node0:
Session ID: 124271, Policy name: P_IQCSAP_10090/276, State: Backup, Timeout: 14396, Valid
In: 113.X.X.199/57104 --> X.X.X.165/10090;tcp, If: reth15.3006, Pkts: 0, Bytes: 0
Out: 172.22.201.19/10089 --> 113.X.X.199/57104;tcp, If: reth3.500, Pkts: 0, Bytes: 0
Total sessions: 1
node1:
Session ID: 140801, Policy name: P_IQCSAP_10090/276, State: Active, Timeout: 1796, Valid
In: 113.X.X.199/57104 --> X.X.X.165/10090;tcp, If: reth15.3006, Pkts: 2, Bytes: 92
Out: 172.22.201.19/10089 --> 113.X.X.199/57104;tcp, If: reth3.500, Pkts: 1, Bytes: 52
Total sessions: 1
juniper srx 240 cluster 內網服務器端口發布到外網配置實例