APC UPS 如何用計算機串列埠超級終端配置AP9617/AP9618/AP9619
阿新 • • 發佈：2019-01-08
使用AP9617,AP9618,AP9619之前，必須設定一些基本引數。本文介紹瞭如何通過串列埠通訊方式配置AP9617，AP9618,AP9619. 配置步驟如下：
1．使用940-0024C通訊線（網路管理卡附帶）連線執行終端模擬程式的計算機和UPS。
2．如該計算機的串列埠（連線940-0024C通訊線）正被APC軟體PowerChute Plus或其他程式使用，請關閉相關程式。 啟動終端模擬程式如HyperTerminal，設定串列埠引數為：2400bps, No Parity , 8 data bits , 1 stop bit , and No Flow Control
注：修改串列埠引數後，要斷開並重新連線該會話(connection)之後，設定方生效。
3. 確認上述兩步無誤後，按回車鍵。
4. 輸入 User Name及 Password ，其預設設定均為 apc。
5. 正確登入後，網路管理卡的管理介面將自動彈出。
顯示介面如下：（請根據您的需求修改相關引數）
User Name : apc
Password : ***
American Power Conversion Network Management Card AOS v2.1.1
(c) Copyright 2002 All Rights Reserved Smart-UPS & Matrix-UPS APP v2.1.0
-------------------------------------------------------------------------------
Name : Unknown Date : 12/11/2003
Contact : Unknown Time : 11:47:50
Location : Unknown User : Administrator
Up Time : 0 Days 0 Hours 20 Minutes Stat : P+ N? A+
Environment : Threshold Violation Present, Contact Alarms Disabled, Relay
Disabled
Smart-UPS 1000 named : On Line
------- Control Console -------------------------------------------------------
1- Device Manager
2- Network
3- System
4- Logout
<ESC>- Main Menu, <ENTER>- Refresh, <CTRL-L>- Event Log
> 2
------- Network ---------------------------------------------------------------
1- TCP/IP
2- DNS
3- Ping Utility
4- FTP Server
5- Telnet/SSH
6- Web/SSL/TLS
7- WAP
8- SNMP
9- Email
10- Syslog
<ESC>- Back, <ENTER>- Refresh, <CTRL-L>- Event Log
> 1
------- TCP/IP ----------------------------------------------------------------
Network not started. Currently making a BOOTP request...
-----------------------------------------------------------------------
MAC Address : 00 C0 B7 67 37 4C
1- Boot Mode : DHCP & BOOTP
2- Advanced...
<ESC>- Back, <ENTER>- Refresh, <CTRL-L>- Event Log
> 1
------- Boot Mode -------------------------------------------------------------
1- DHCP & BOOTP
2- DHCP only
3- BOOTP only
4- Manual
<ESC>- Back, <ENTER>- Refresh
> 4
------- TCP/IP ----------------------------------------------------------------
Network not started. Currently making a BOOTP request...
-----------------------------------------------------------------------
MAC Address : 00 C0 B7 67 37 4C
* Changes will take effect on Logout.
1- System IP : 159.215.125.248
2- Subnet Mask : 255.255.255.0
3- Default Gateway: 159.215.125.1
4- Boot Mode : Manual
5- Advanced...
<ESC>- Back, <ENTER>- Refresh, <CTRL-L>- Event Log
> 1
System IP : 159.215.125.248
------- TCP/IP ----------------------------------------------------------------
Network not started. Currently making a BOOTP request...
-----------------------------------------------------------------------
MAC Address : 00 C0 B7 67 37 4C
* Changes will take effect on Logout.
1- System IP : 159.215.125.248
2- Subnet Mask : 255.255.255.0
3- Default Gateway: 159.215.125.1
4- Boot Mode : Manual
5- Advanced...
<ESC>- Back, <ENTER>- Refresh, <CTRL-L>- Event Log
> 5
------- Advanced... -----------------------------------------------------------
Link is down.
1- Host Name : APC
2- Domain Name : somedomain.com
3- Port Speed : Auto-negotiation
4- Accept Changes:
<ESC>- Back, <ENTER>- Refresh, <CTRL-L>- Event Log
> 4
------- Advanced... -----------------------------------------------------------
Link is down.
1- Host Name : APC
2- Domain Name : somedomain.com
3- Port Speed : Auto-negotiation
4- Accept Changes: Success
<ESC>- Back, <ENTER>- Refresh, <CTRL-L>- Event Log
>
需要注意的是TCP/IP的三個引數包括System IP,Default Gateway,Subnet Mask都必須設定，尤其閘道器Default Gateway不能為0.0.0.0,否則會導致網路不通。退出超級終端，則網路設定成功。
首先用ping 命令檢查網路配置是否成功，如果不能Ping通，請將卡Reset,卡上有一個白色的Reset按鈕，按一下，則卡重啟，該重啟只是卡重新加電而已，不會改變卡內的已有的任何設定。
1．使用940-0024C通訊線（網路管理卡附帶）連線執行終端模擬程式的計算機和UPS。
2．如該計算機的串列埠（連線940-0024C通訊線）正被APC軟體PowerChute Plus或其他程式使用，請關閉相關程式。 啟動終端模擬程式如HyperTerminal，設定串列埠引數為：2400bps, No Parity , 8 data bits , 1 stop bit , and No Flow Control
注：修改串列埠引數後，要斷開並重新連線該會話(connection)之後，設定方生效。
3. 確認上述兩步無誤後，按回車鍵。
4. 輸入 User Name及 Password ，其預設設定均為 apc。
5. 正確登入後，網路管理卡的管理介面將自動彈出。
顯示介面如下：（請根據您的需求修改相關引數）
User Name : apc
Password : ***
American Power Conversion Network Management Card AOS v2.1.1
(c) Copyright 2002 All Rights Reserved Smart-UPS & Matrix-UPS APP v2.1.0
-------------------------------------------------------------------------------
Name : Unknown Date : 12/11/2003
Contact : Unknown Time : 11:47:50
Location : Unknown User : Administrator
Up Time : 0 Days 0 Hours 20 Minutes Stat : P+ N? A+
Environment : Threshold Violation Present, Contact Alarms Disabled, Relay
Disabled
Smart-UPS 1000 named : On Line
------- Control Console -------------------------------------------------------
1- Device Manager
2- Network
3- System
4- Logout
<ESC>- Main Menu, <ENTER>- Refresh, <CTRL-L>- Event Log
> 2
------- Network ---------------------------------------------------------------
1- TCP/IP
2- DNS
3- Ping Utility
4- FTP Server
5- Telnet/SSH
6- Web/SSL/TLS
7- WAP
8- SNMP
9- Email
10- Syslog
<ESC>- Back, <ENTER>- Refresh, <CTRL-L>- Event Log
> 1
------- TCP/IP ----------------------------------------------------------------
Network not started. Currently making a BOOTP request...
-----------------------------------------------------------------------
MAC Address : 00 C0 B7 67 37 4C
1- Boot Mode : DHCP & BOOTP
2- Advanced...
<ESC>- Back, <ENTER>- Refresh, <CTRL-L>- Event Log
> 1
------- Boot Mode -------------------------------------------------------------
1- DHCP & BOOTP
2- DHCP only
3- BOOTP only
4- Manual
<ESC>- Back, <ENTER>- Refresh
> 4
------- TCP/IP ----------------------------------------------------------------
Network not started. Currently making a BOOTP request...
-----------------------------------------------------------------------
MAC Address : 00 C0 B7 67 37 4C
* Changes will take effect on Logout.
1- System IP : 159.215.125.248
2- Subnet Mask : 255.255.255.0
3- Default Gateway: 159.215.125.1
4- Boot Mode : Manual
5- Advanced...
<ESC>- Back, <ENTER>- Refresh, <CTRL-L>- Event Log
> 1
System IP : 159.215.125.248
------- TCP/IP ----------------------------------------------------------------
Network not started. Currently making a BOOTP request...
-----------------------------------------------------------------------
MAC Address : 00 C0 B7 67 37 4C
* Changes will take effect on Logout.
1- System IP : 159.215.125.248
2- Subnet Mask : 255.255.255.0
3- Default Gateway: 159.215.125.1
4- Boot Mode : Manual
5- Advanced...
<ESC>- Back, <ENTER>- Refresh, <CTRL-L>- Event Log
> 5
------- Advanced... -----------------------------------------------------------
Link is down.
1- Host Name : APC
2- Domain Name : somedomain.com
3- Port Speed : Auto-negotiation
4- Accept Changes:
<ESC>- Back, <ENTER>- Refresh, <CTRL-L>- Event Log
> 4
------- Advanced... -----------------------------------------------------------
Link is down.
1- Host Name : APC
2- Domain Name : somedomain.com
3- Port Speed : Auto-negotiation
4- Accept Changes: Success
<ESC>- Back, <ENTER>- Refresh, <CTRL-L>- Event Log
>
需要注意的是TCP/IP的三個引數包括System IP,Default Gateway,Subnet Mask都必須設定，尤其閘道器Default Gateway不能為0.0.0.0,否則會導致網路不通。退出超級終端，則網路設定成功。
首先用ping 命令檢查網路配置是否成功，如果不能Ping通，請將卡Reset,卡上有一個白色的Reset按鈕，按一下，則卡重啟，該重啟只是卡重新加電而已，不會改變卡內的已有的任何設定。