第十二週專案三摩托車繼承自行車和機動車
阿新 • • 發佈:2019-01-11
/* * Copyright (c) 2014, 煙臺大學計算機學院 * All rights reserved. * 作 者:紀麗娜 * 完成日期:2014 年05月14日 * 版 本 號:v1.0 * 問題描述: 在下面一段類的定義中,自行車類的虛基類為車輛類, 機動車類的虛基類也為車輛類,摩托車類的基類為自行車類和機動車類類之間均為公有繼承. (1)根據上面各類間關係的描述,補全下面程式段中空缺的程式碼; (2)實現程式中宣告的成員函式,注意相應操作中的動作發生的條件不能滿足時應給出提示。 (3)執行程式,享受開摩托的過程。先執行再程式設計。不必申請駕照,這個摩托車很安全。) (4)在報告中,請用自己的話寫清楚使用虛基類解決什麼問題? */ #include <iostream> #include<conio.h> #include <windows.h> using namespace std; enum vehicleStaus {rest, running}; //車輛狀態:泊車、行進 class vehicle //車輛類 { protected: int maxSpeed; //最大車速 int currentSpeed; //當前速度 int weight; //車重 vehicleStaus status; //rest-泊車狀態;running-行進狀態 public: vehicle(int maxS, int w); //建構函式,初始時,當前速度總為0且處在停車狀態 void start(); //由rest狀態到running, 初速為1 void stop(); //由running狀態到rest, 當前速度小於5時,才允許停車 void speed_up(); //加速,呼叫1次,速度加1 void slow_down(); //減速,呼叫1次,速度減1,速度為0時,停車 }; //建構函式,初始時,當前速度總為0且處在停車狀態 vehicle::vehicle(int maxS, int w):maxSpeed(maxS), currentSpeed(0),weight(w), status(rest) {} //啟動:由rest狀態到running, 初速為1 void vehicle::start() { if (status==rest) { status=running; currentSpeed=1; } else cout<<"車輛已經行駛!"<<endl; } //由running狀態到rest, 當前速度小於5時,才允許停車 void vehicle::stop() { if (status==running) { if(currentSpeed<5) { status=rest; currentSpeed=0; } else { cout<<"車速太快!先減速再停車……"<<endl; } } else { cout<<"車輛未啟動!"<<endl; } } //加速,呼叫1次,速度加1 void vehicle::speed_up() { if (status==running) { if(currentSpeed<maxSpeed) { ++currentSpeed; } else { cout<<"請不要超速行駛……"<<endl; } } else { cout<<"車輛未啟動!"<<endl; } } //減速,呼叫1次,速度減1,速度為0時,停車 void vehicle::slow_down() { if (status==running) { if(currentSpeed>0) --currentSpeed; } else cout<<"車輛未啟動!"<<endl; if(currentSpeed==0) status=rest; } class bicycle : virtual public vehicle//(1)自行車類的虛基類為車輛類 { protected: double height; //車高 public: bicycle(int maxS=10, int w=50, int h=0.7); //定義建構函式 }; bicycle::bicycle(int maxS, int w, int h):vehicle(maxS, w),height(h) {} class motorcar : virtual public vehicle//(2)機動車類的虛基類也為車輛類 { protected: int seatNum; //座位數 int passengerNum; //乘客人數 public: motorcar(int maxS=150, int w=1500, int s=5, int p=1); //定義建構函式 void addPassenger(int p=1); //增加搭載的乘客,超員要拒載,有人下車時,p為負數。當然車上乘客至少有1個(司機)。只有車停穩後才能上下客。 }; //定義建構函式 motorcar::motorcar(int maxS, int w, int s, int p): vehicle(maxS, w),seatNum(s),passengerNum(p) {} //搭載乘客,超員要拒載,有人下車時,p為負數。當然車上乘客至少有1個(司機)。上下車時要保證安全…… void motorcar::addPassenger(int p) { if (status==running) { cout<<"車輛正在行駛,停車後再上下車!"<<endl; } else { passengerNum+=p; if(passengerNum>seatNum) { passengerNum=seatNum; cout<<"涉嫌超員,已清理後達到滿員!"<<endl; } else if (passengerNum<1) { passengerNum=1; cout<<"請司機不要離開崗位!"<<endl; } } } class motorcycle: public bicycle, public motorcar //(3)摩托車類的基類為自行車類和機動車類 { public: motorcycle(int maxS=90, int w=100, int s=3, int p=1, int h=0.7);//定義建構函式 void show(); //顯示摩托車的執行狀態 }; //定義建構函式 motorcycle::motorcycle(int maxS, int w, int s, int p, int h):vehicle(maxS, w),bicycle(maxS, w, h),motorcar(maxS, w, s, p) {} //顯示摩托車的執行狀態 void motorcycle::show() { cout<<"狀態:"; if(status==rest) cout<<"泊車;\t"; else cout<<"行進;\t"; cout<<"車速:"<<currentSpeed<<" / "<< maxSpeed <<"\t當前乘員:"<<passengerNum<<" / "<< seatNum << endl; } int main( ) { motorcycle m; bool end=false; while (!end) { cout<<"請操作:1-啟動 2-加速 3-減速 4-有人上車 5-有人下車 6-停車 0-結束"<<endl; char keydown= _getch(); //_getch()返回鍵盤上讀取的字元 switch(keydown) { case '1': cout<<"選中的操作是1-啟動\t"; m.start(); break; case '2': cout<<"選中的操作是2-加速\t"; m.speed_up(); break; case '3': cout<<"選中的操作是3-減速\t"; m.slow_down(); break; case '4': cout<<"選中的操作是4-有人上車\t"; m.addPassenger(); break; case '5': cout<<"選中的操作是5-有人下車\t"; m.addPassenger(-1); break; case '6': cout<<"選中的操作是6-停車\t"; m.stop(); break; case '0': end=true; break; } m.show(); cout<<endl; Sleep(200); //要包含標頭檔案<windows.h> } return 0; }
覺得好神奇。。。。。。