1、在win下，虛擬機器安裝Ubuntu或者其他linux發行版的時候，安裝完成之後，螢幕顯示很小，看著很不習慣。上網了找了很多帖子，大部分都說要安裝VMware tools。

安裝VMware tools 很簡單，選單項VM-》安裝VMtools，能安裝肯定就OK了。但很多人估計會遇到VMware Tools installation cannot be started manually while the easy install is in progress.這個彈窗錯誤。

2、這個問題產生的原因，找了一些英文的資料看了一下，給出了很詳細的解決方法，為避免翻譯錯誤，再次不翻譯了，直接貼出

原文。

This error occurs when the virtual floppy with the autoinstall information required by Easy Install does not unmount properly. To resolve this issue and unmount the virtual floppy:

1. Power off the virtual machine.
2. Go to VM > Settings
3. Select Floppy.
4. Select Use physical drive, and set the dropdown to Auto detect
   .This unmounts the virtual floppy from the virtual drive.
5. Power on the virtual machine and install VMware Tools. 

If the same error persists when trying to install VMware Tools, delete and re-add the virtual floppy drive and the virtual CD/DVD drive. To delete and re-add the drives:

1. Power off the virtual machine.
2. Go to VM > Settings
3. Select CD/DVD.
4. Make a note of the current settings for this device, then click Remove.
5. Click Add.
6. Select CD/DVD, and click Next.
7. Select the settings you noted previously (or you can set them later), and click Next > Finish.
8. Select Floppy.
9. Make a note of the current settings for this device, then click Remove.
10. Click Add.
11. Select Floppy, and click Next.
12. Select the settings you noted previously (or you can set them later), and click Next > Finish.
13. Power on the virtual machine and install VMware Tools.

3、上面那個問題解決之後，進入虛擬機器裡面安裝的Ubuntu，在CD-ROM中就可以看到vmtools 的安裝包vmware-tools-distrib.tar.gz

 把這個安裝包從CD拷貝出來，解壓縮安裝。

tar zxvf  vmware-tools-distrib.tar.gz  

進入解壓縮的目錄，執行裡面的vmware-install.pl指令碼進行安裝，一路enter下去就可以安裝成功了。

4、安裝成功之後重新登入Ubuntu，輸入密碼之後，就可以滿屏顯示了。