華為E180 在windows 7 RTM下的使用(Using HuaWei E180 on windows 7 RTM)
華為官方尚未推出針對Windows 7平臺的E180驅動，在windows 7 X86上使用E180的首要解決的問題即是驅動的安裝問題。
A.在windows 7 X86上安裝華為E180自帶XP/VISTA驅動並使其正常工作的方法如下：
1.將E180插入電腦的USB口。
2.以windows vista with sp2的相容模式執行DataCard_Setup.exe，安裝驅動程式。
3.重啟計算機。
4.重啟計算機後，系統會繼續自動安裝裝置驅動程式，並會提示若干失敗資訊（不用理會這些失敗提示）。
5.開啟“開始”選單中的Devices and Printers,然後再雙擊開啟HUAWEI Mobile，點選“Hardware”，此時會出現一個硬體的列表，若在此列表中出現了HUAWEI Mobile Connect - 3G Modem，則表明E180驅動已經安裝成功。
B.在windows 7 X86上安裝好E180後，如何使用E180進行寬頻撥號
因為驅動與程式的原因，華為E180自帶的撥號程式無法在windows 7上正常使用，但是我們可以利用系統自身的撥號功能進行撥號。
1.進入Control Panel-->Network and Internet-->Network and Sharing Center,
2.點選 Setup a new connection or network
3.選擇Setup a dial-up connection
4.選擇HUAWEI Mobile Connect - 3G Modem
5.在Dial-up phone number中填入*99#
6.最後在connection name裡邊填入預想的名字，也就是給這個連結取個名字
7.最後點選Connect，至此，我們完成了E180在windows 7上的安裝和正常使用。
經測試，該驅動在windows 7 X64下能完美的工作，但前提也是以Windows Vista With SP2的相容模式安裝DataCard_Setup64.exe
For english users:
A. How to install the HuaWei E180 Driver on windows 7 x86 RTM ?
1. Plug the E180 into the computer's usb port.
2. Run the "DataCard_Setup.exe" in the windows vista (Service Pack 2) compatible mode to install the driver.
3. Reboot the computer.
4. After the reboot, the computer seems to install the driver continually and pops some failure information(No problem,that's ok).
5. Goto "Control Panel/Hardware and Sound/Devices and Printers", double click the "HUAWEI Mobile",click the "Hardware" tab , to see if the item "HUAWEI Mobile Connect - 3G Modem" is in the hardware list. If the driver installation was successfully finished, the "HUAWEI Mobile Connect - 3G Modem" item would be in the hardware list.
B. How to use the HuaWei E180 in windows 7 x86 RTM after successfully installed the driver ?
1. Goto "Control Panel-->Network and Internet-->Network and Sharing Center";
2. Choose "Setup a new connection or network";
3. Choose "Setup a dial-up connection";
4. Choose "HUAWEI Mobile Connect - 3G Modem";
5. Input "*99#" in the "Dial-up phone number" text box;
6. Set up a name for the link in the "connection name" field.
7. Click "Connect",just enjoy the internet.
This card can also work in Windows 7 X64, The key point is that you install the driver(DataCard_Setup64) in Windows Vista With Sp2 mode.The HuaWei Dial-up application works perfectly in Windows 7 X64.