一. linux下環境搭建

• 使用者需要 “dialout” 組 來訪問usb

    cat >$HOME/rule.tmp <<_EOF
    # All 3D Robotics (includes PX4) devices
    SUBSYSTEM=="usb", ATTR{idVendor}=="26AC", GROUP="plugdev"
    # FTDI (and Black Magic Probe) Devices
    SUBSYSTEM=="usb", ATTR{idVendor}=="0483", GROUP="plugdev"
    # Olimex Devices
 

    SUBSYSTEM=="usb",  ATTR{idVendor}=="15ba", GROUP="plugdev" _EOF
    sudo mv \$HOME/rule.tmp /etc/udev/rules.d/10-px4.rules
    sudo /etc/init.d/udev restart
    sudo usermod -a -G dialout $USER

• 必要的工具

    #cmake python gcc等編譯工具
    sudo add-apt-repository ppa:george-edison55/cmake-3.x -y
    sudo apt-get
 
 update
    sudo apt-get install python-argparse git-core wget zip \
    python-empy qtcreator cmake build-essential genromfs -y

    #模擬工具
    sudo apt-get install ant protobuf-compiler libeigen3-dev libopencv-dev openjdk-8-jdk openjdk-8-jre clang-3.5 lldb-3.5 -y

    #ubuntu預設會安裝一個串列埠調變解調器的驅動，電腦重啟後會使用串列埠或usb串列埠，應該解除安裝
 

    sudo apt-get remove modemmanager

    #arm-gcc等工具
    sudo add-apt-repository ppa:terry.guo/gcc-arm-embedded -y
    sudo apt-get update
    sudo apt-get install python-serial openocd flex bison libncurses5-dev autoconf texinfo build-essential libftdi-dev libtool zlib1g-dev python-empy gcc-arm-none-eabi gdb-arm-none-eabi -y

    #stlink linux驅動
    sudo apt-get install git libusb-1.0.0-dev
    git clone https://github.com/texane/stlink.git
    cd stlink
    sudo  make install

• PX4原始碼下載

    mkdir -p ~/src
    cd ~/src

    #原始碼下載
    git clone https://github.com/PX4/Firmware.git
    cd Firmware

    #專案依賴庫更新
    git submodule update --init --recursive
    cd ..

• 編譯

    cd Firmware
    make px4fmu-v2_default
    make px4fmu-v2_default upload