sails框架專案移植
阿新 • • 發佈：2019-01-28
# rsyslog v5 configuration file
# For more information see /usr/share/doc/rsyslog-*/rsyslog_conf.html
# If you experience problems, see http://www.rsyslog.com/doc/troubleshoot.html
#### MODULES ####
$ModLoad imuxsock # provides support for local system logging (e.g. via logger command)
$ModLoad imklog # provides kernel logging support (previously done by rklogd)
#$ModLoad immark # provides --MARK-- message capability
# Provides UDP syslog reception
$ModLoad imudp
$UDPServerRun 514
# Provides TCP syslog reception
$ModLoad imtcp
$InputTCPServerRun 514
#### GLOBAL DIRECTIVES ####
# Use default timestamp format
$ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat
# File syncing capability is disabled by default. This feature is usually not required,
# not useful and an extreme performance hit
#$ActionFileEnableSync on
# Filter duplicated messages
$RepeatedMsgReduction on
$template DynFileS,"/mnt/log/%$NOW%/mongos.log"
$template DynFileD,"/mnt/log/%$NOW%/mongod.log"
$template DynFileC,"/mnt/log/%$NOW%/mongod-config.log"
$template DynFileE,"/mnt/log/%$NOW%/eduapi.log"
#### RULES ####
# Log all kernel messages to the console.
# Logging much else clutters up the screen.
# kern.* /dev/console
# Log anything (except mail) of level info or higher.
# Don't log private authentication messages!
#*.info;mail.none;authpriv.none;cron.none /var/log/messages
# The authpriv file has restricted access.
#authpriv.* /var/log/secure
# Log all the mail messages in one place.
#mail.* -/var/log/maillog
# Log cron stuff
#cron.* /var/log/cron
# Everybody gets emergency messages
#*.emerg *
# Save news errors of level crit and higher in a special file.
#uucp,news.crit /var/log/spooler
# Save boot messages also to boot.log
#local7.* /var/log/boot.log
#local0.* /mnt/log/eduapi.log
local0.* -?DynFileE
#local1.* /mnt/log/mongod.log
local1.* -?DynFileD
#local2.* /mnt/log/mongod-config.log
local2.* -?DynFileC
#local3.* /mnt/log/mongos.log
local3.* -?DynFileS
# ### begin forwarding rule ###
# The statement between the begin ... end define a SINGLE forwarding
# rule. They belong together, do NOT split them. If you create multiple
# forwarding rules, duplicate the whole block!
# Remote Logging (we use TCP for reliable delivery)
#
# An on-disk queue is created for this action. If the remote host is
# down, messages are spooled to disk and sent when it is up again.
#$WorkDirectory /var/lib/rsyslog # where to place spool files
#$ActionQueueFileName fwdRule1 # unique name prefix for spool files
#$ActionQueueMaxDiskSpace 1g # 1gb space limit (use as much as possible)
#$ActionQueueSaveOnShutdown on # save messages to disk on shutdown
#$ActionQueueType LinkedList # run asynchronously
#$ActionResumeRetryCount -1 # infinite retries if host is down
# remote host is: name/ip:port, e.g. 192.168.0.1:514, port optional
#*.* @@remote-host:514
# ### end of the forwarding rule ###
# Finally include all config files in /etc/rsyslog.d. This allows overrides
# of the default configuration above.
$IncludeConfig /etc/rsyslog.d/*.conf
# For more information see /usr/share/doc/rsyslog-*/rsyslog_conf.html
# If you experience problems, see http://www.rsyslog.com/doc/troubleshoot.html
#### MODULES ####
$ModLoad imuxsock # provides support for local system logging (e.g. via logger command)
$ModLoad imklog # provides kernel logging support (previously done by rklogd)
#$ModLoad immark # provides --MARK-- message capability
# Provides UDP syslog reception
$ModLoad imudp
$UDPServerRun 514
# Provides TCP syslog reception
$ModLoad imtcp
$InputTCPServerRun 514
#### GLOBAL DIRECTIVES ####
# Use default timestamp format
$ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat
# File syncing capability is disabled by default. This feature is usually not required,
# not useful and an extreme performance hit
#$ActionFileEnableSync on
# Filter duplicated messages
$RepeatedMsgReduction on
$template DynFileS,"/mnt/log/%$NOW%/mongos.log"
$template DynFileD,"/mnt/log/%$NOW%/mongod.log"
$template DynFileC,"/mnt/log/%$NOW%/mongod-config.log"
$template DynFileE,"/mnt/log/%$NOW%/eduapi.log"
#### RULES ####
# Log all kernel messages to the console.
# Logging much else clutters up the screen.
# kern.* /dev/console
# Log anything (except mail) of level info or higher.
# Don't log private authentication messages!
#*.info;mail.none;authpriv.none;cron.none /var/log/messages
# The authpriv file has restricted access.
#authpriv.* /var/log/secure
# Log all the mail messages in one place.
#mail.* -/var/log/maillog
# Log cron stuff
#cron.* /var/log/cron
# Everybody gets emergency messages
#*.emerg *
# Save news errors of level crit and higher in a special file.
#uucp,news.crit /var/log/spooler
# Save boot messages also to boot.log
#local7.* /var/log/boot.log
#local0.* /mnt/log/eduapi.log
local0.* -?DynFileE
#local1.* /mnt/log/mongod.log
local1.* -?DynFileD
#local2.* /mnt/log/mongod-config.log
local2.* -?DynFileC
#local3.* /mnt/log/mongos.log
local3.* -?DynFileS
# ### begin forwarding rule ###
# The statement between the begin ... end define a SINGLE forwarding
# rule. They belong together, do NOT split them. If you create multiple
# forwarding rules, duplicate the whole block!
# Remote Logging (we use TCP for reliable delivery)
#
# An on-disk queue is created for this action. If the remote host is
# down, messages are spooled to disk and sent when it is up again.
#$WorkDirectory /var/lib/rsyslog # where to place spool files
#$ActionQueueFileName fwdRule1 # unique name prefix for spool files
#$ActionQueueMaxDiskSpace 1g # 1gb space limit (use as much as possible)
#$ActionQueueSaveOnShutdown on # save messages to disk on shutdown
#$ActionQueueType LinkedList # run asynchronously
#$ActionResumeRetryCount -1 # infinite retries if host is down
# remote host is: name/ip:port, e.g. 192.168.0.1:514, port optional
#*.* @@remote-host:514
# ### end of the forwarding rule ###
# Finally include all config files in /etc/rsyslog.d. This allows overrides
# of the default configuration above.
$IncludeConfig /etc/rsyslog.d/*.conf