1. 程式人生 > >Android 拍照、選擇圖片並裁剪

Android 拍照、選擇圖片並裁剪

前言:前段時間做專案用到了圖片裁剪,呼叫系統裁剪圖片,結果在我的小米3上一直有問題,裁剪介面打不開,在其他裝置上沒問題,於是研究其他軟體是怎麼做的,淘寶的裁剪圖片是自己做的,當然沒問題,京東的是呼叫的系統的也是打不開裁剪介面。但是不知道為什麼會出現這個問題,在其他小米裝置上貌似沒有問題。看來呼叫系統的裁剪圖片還是不靠譜的。

一、 實現效果

    按照之前部落格的風格,首先看下實現效果。

    

二、 uCrop專案應用

    想起之前看到的Yalantis/uCrop效果比較絢,但是研究原始碼之後發現在定製介面方面還是有一點的限制,於是在它的基礎上做了修改Android-Crop

,把定製介面獨立出來,讓使用者去自由設定。下圖為使用Android-Crop實現的模仿微信選擇圖片並裁剪Demo。

   

三、 實現思路


    比較簡單的選擇裝置圖片裁剪,並將裁剪後的圖片儲存到指定路徑;
    呼叫系統拍照,將拍照圖片儲存在SD卡,然後裁剪圖片並將裁剪後的圖片儲存在指定路徑。
流程圖如下所示:     
 

四、 選擇框實現


    這裡通過PopupWindow來實現,當然也可以根據需求採用其他方式實現。實現效果如下圖所示:

   

1. XML佈局

<?xml version="1.0" encoding="utf-8"?>
<RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android"
    android:layout_width="fill_parent"
    android:layout_height="wrap_content"
    android:gravity="center_horizontal"
    android:orientation="vertical">

    <LinearLayout
        android:id="@+id/pop_layout"
        android:layout_width="match_parent"
        android:layout_height="wrap_content"
        android:layout_alignParentBottom="true"
        android:background="#444"
        android:gravity="center_horizontal"
        android:orientation="vertical">

        <Button
            android:id="@+id/picture_selector_take_photo_btn"
            android:layout_width="match_parent"
            android:layout_height="wrap_content"
            android:layout_marginLeft="10dip"
            android:layout_marginRight="10dip"
            android:layout_marginTop="10dp"
            android:background="#4d69ff"
            android:padding="10dp"
            android:text="拍照"
            android:textColor="#CEC9E7"
            android:textSize="18sp"
            android:textStyle="bold" />

        <Button
            android:id="@+id/picture_selector_pick_picture_btn"
            android:layout_width="match_parent"
            android:layout_height="wrap_content"
            android:layout_marginLeft="10dip"
            android:layout_marginRight="10dip"
            android:layout_marginTop="5dp"
            android:background="#4d69ff"
            android:padding="10dp"
            android:text="從相簿選擇"
            android:textColor="#CEC9E7"
            android:textSize="18sp"
            android:textStyle="bold" />

        <Button
            android:id="@+id/picture_selector_cancel_btn"
            android:layout_width="match_parent"
            android:layout_height="wrap_content"
            android:layout_marginBottom="15dip"
            android:layout_marginLeft="10dip"
            android:layout_marginRight="10dip"
            android:layout_marginTop="20dp"
            android:background="@android:color/white"
            android:padding="10dp"
            android:text="取消"
            android:textColor="#373447"
            android:textSize="18sp"
            android:textStyle="bold" />
    </LinearLayout>

</RelativeLayout>

2. 程式碼編寫

public SelectPicturePopupWindow(Context context) {
    super(context);
    LayoutInflater inflater = (LayoutInflater) context.getSystemService(Context.LAYOUT_INFLATER_SERVICE);
    mMenuView = inflater.inflate(R.layout.layout_picture_selector, null);
    takePhotoBtn = (Button) mMenuView.findViewById(R.id.picture_selector_take_photo_btn);
    pickPictureBtn = (Button) mMenuView.findViewById(R.id.picture_selector_pick_picture_btn);
    cancelBtn = (Button) mMenuView.findViewById(R.id.picture_selector_cancel_btn);
    // 設定按鈕監聽
    takePhotoBtn.setOnClickListener(this);
    pickPictureBtn.setOnClickListener(this);
    cancelBtn.setOnClickListener(this);
}

建立SelectPicturePopupWindow的時候設定按鈕的監聽。這裡編寫一個選擇監聽介面:
/**
 * 選擇監聽介面
 */
public interface OnSelectedListener {
    void OnSelected(View v, int position);
}

回撥的引數為點選的按鈕View以及當前按鈕的索引,那麼只要在選擇監聽裡面返回介面的回撥就可以啦。

@Override
public void onClick(View v) {
    switch (v.getId()) {
        case R.id.picture_selector_take_photo_btn:
            if(null != mOnSelectedListener) {
                mOnSelectedListener.OnSelected(v, 0);
            }
            break;
        case R.id.picture_selector_pick_picture_btn:
            if(null != mOnSelectedListener) {
                mOnSelectedListener.OnSelected(v, 1);
            }
            break;
        case R.id.picture_selector_cancel_btn:
            if(null != mOnSelectedListener) {
                mOnSelectedListener.OnSelected(v, 2);
            }
            break;
    }
}

PopupWindow的初始化建立、監聽設定好之後,只要提供顯示與隱藏兩個方法就可以了。

/**
 * 把一個View控制元件新增到PopupWindow上並且顯示
 *
 * @param activity
 */
public void showPopupWindow(Activity activity) {
    popupWindow = new PopupWindow(mMenuView,    // 新增到popupWindow
    ViewGroup.LayoutParams.MATCH_PARENT, ViewGroup.LayoutParams.WRAP_CONTENT);
    popupWindow.setBackgroundDrawable(new ColorDrawable(Color.TRANSPARENT));
    popupWindow.showAtLocation(activity.getWindow().getDecorView(), Gravity.CENTER | Gravity.BOTTOM, 0, 0);
    popupWindow.setAnimationStyle(android.R.style.Animation_InputMethod);   // 設定視窗顯示的動畫效果
    popupWindow.setFocusable(false);                                        // 點選其他地方隱藏鍵盤 popupWindow
    popupWindow.update();
}
/**
 * 移除PopupWindow
 */
public void dismissPopupWindow() {
    if (popupWindow != null && popupWindow.isShowing()) {
        popupWindow.dismiss();
        popupWindow = null;
    }
}


OK,到這裡選擇框的實現就完成了。

五、使用選擇框


    通過我們上面對選擇框的封裝,使用起來就比較簡單了,只需要初始化及設定選擇的監聽就可以啦。

1.初始化選擇框

mSelectPicturePopupWindow = new SelectPicturePopupWindow(mContext);
mSelectPicturePopupWindow.setOnSelectedListener(this);

2.設定選擇框監聽

@Override
public void OnSelected(View v, int position) {
    switch (position) {
        case 0:
            // TODO: "拍照"按鈕被點選了
            break;
        case 1:
            // TODO: "從相簿選擇"按鈕被點選了
            break;
        case 2:
            // TODO: "取消"按鈕被點選了
            break;
    }
}

然後在Fragment上進行封裝,我們取名為PictureSelectFragment。

六、拍照並儲存圖片


呼叫系統的拍照,並把拍攝的圖片儲存到指定位置。
@Override
public void OnSelected(View v, int position) {
    switch (position) {
        case 0:
            // "拍照"按鈕被點選了
            mSelectPicturePopupWindow.dismissPopupWindow();
            Intent takeIntent = new Intent(MediaStore.ACTION_IMAGE_CAPTURE);
            //下面這句指定呼叫相機拍照後的照片儲存的路徑
            takeIntent.putExtra(MediaStore.EXTRA_OUTPUT, Uri.fromFile(new File(mTempPhotoPath)));
            startActivityForResult(takeIntent, CAMERA_REQUEST_CODE);
            break;
        case 1:
            // TODO: "從相簿選擇"按鈕被點選了
            break;
        case 2:
            // TODO: "取消"按鈕被點選了
            break;
    }
}

這裡的指定位置為sd卡本目錄下

mTempPhotoPath = Environment.getExternalStorageDirectory() + File.separator + "photo.jpeg";

當拍攝照片完成時會回撥到onActivityResult,我們在這裡處理圖片的裁剪就可以了。
@Override
public void onActivityResult(int requestCode, int resultCode, Intent data) {
    if (resultCode == mActivity.RESULT_OK) {
        switch (requestCode) {
            case CAMERA_REQUEST_CODE:   
                // TODO: 呼叫相機拍照
                break;
        }
    }
    super.onActivityResult(requestCode, resultCode, data);
}

七、相簿選擇圖片


呼叫系統的選擇圖片
@Override
public void OnSelected(View v, int position) {
    switch (position) {
        case 0:
            // "拍照"按鈕被點選了
            mSelectPicturePopupWindow.dismissPopupWindow();
            Intent takeIntent = new Intent(MediaStore.ACTION_IMAGE_CAPTURE);
            // 下面這句指定呼叫相機拍照後的照片儲存的路徑
            takeIntent.putExtra(MediaStore.EXTRA_OUTPUT, Uri.fromFile(new File(mTempPhotoPath)));
            startActivityForResult(takeIntent, CAMERA_REQUEST_CODE);
            break;
        case 1:
            // "從相簿選擇"按鈕被點選了
            mSelectPicturePopupWindow.dismissPopupWindow();
            Intent pickIntent = new Intent(Intent.ACTION_PICK, null);
            // 如果限制上傳到伺服器的圖片型別時可以直接寫如:"image/jpeg 、 image/png等的型別"
            pickIntent.setDataAndType(MediaStore.Images.Media.EXTERNAL_CONTENT_URI, "image/*");
            startActivityForResult(pickIntent, GALLERY_REQUEST_CODE);
            break;
        case 2:
           // TODO: "取消"按鈕被點選了
            break;
    }
}

當拍選擇圖片完成時會回撥到onActivityResult,在這裡處理選擇的返回結果。

@Override
public void onActivityResult(int requestCode, int resultCode, Intent data) {
    if (resultCode == mActivity.RESULT_OK) {
        switch (requestCode) {
            case CAMERA_REQUEST_CODE:
                // TODO: 呼叫相機拍照
                break;
            case GALLERY_REQUEST_CODE:
                // TODO: 直接從相簿獲取
                break;
        }
    }
    super.onActivityResult(requestCode, resultCode, data);
}

八、使用Crop裁剪圖片


    裁剪圖片,這裡設定寬高比為1:1,最大尺寸為512*512,當然可以根據自己的需求來設定。
/**
 * 裁剪圖片方法實現
 *
 * @param uri
 */
public void startCropActivity(Uri uri) {
    UCrop.of(uri, mDestinationUri)
            .withAspectRatio(1, 1)
            .withMaxResultSize(512, 512)
            .withTargetActivity(CropActivity.class)
            .start(mActivity, this);
}

CropActiivty裁剪完成時會回撥到onActivityResult,在這裡處理選擇的返回結果。

@Override
public void onActivityResult(int requestCode, int resultCode, Intent data) {
    if (resultCode == mActivity.RESULT_OK) {
        switch (requestCode) {
            case CAMERA_REQUEST_CODE:   // 呼叫相機拍照
                File temp = new File(mTempPhotoPath);
                startCropActivity(Uri.fromFile(temp));
                break;
            case GALLERY_REQUEST_CODE:  // 直接從相簿獲取
                startCropActivity(data.getData());
                break;
            case UCrop.REQUEST_CROP: 
                // TODO: 裁剪圖片結果
                break;
            case UCrop.RESULT_ERROR:
                // TODO: 裁剪圖片錯誤
                break;
        }
    }
    super.onActivityResult(requestCode, resultCode, data);
}

CropActivity的介面如下所示:

   

1. XML佈局

<RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android"
    xmlns:fab="http://schemas.android.com/apk/res-auto"
    android:layout_width="match_parent"
    android:layout_height="match_parent"
    android:clipToPadding="true"
    android:fitsSystemWindows="true">

    <include layout="@layout/toolbar_layout" />

    <FrameLayout
        android:layout_width="match_parent"
        android:layout_height="match_parent"
        android:layout_below="@+id/toolbar"
        android:background="#000">

        <com.kevin.crop.view.UCropView
            android:id="@+id/weixin_act_ucrop"
            android:layout_width="match_parent"
            android:layout_height="match_parent"
            android:visibility="invisible" />

    </FrameLayout>

    <android.support.design.widget.CoordinatorLayout
        android:layout_width="match_parent"
        android:layout_height="match_parent">

        <android.support.design.widget.FloatingActionButton
            android:id="@+id/crop_act_save_fab"
            android:layout_width="wrap_content"
            android:layout_height="wrap_content"
            android:layout_gravity="bottom|right"
            android:layout_margin="@dimen/fab_margin"
            android:src="@mipmap/ic_done_white"
            fab:fabSize="normal" />
    </android.support.design.widget.CoordinatorLayout>


</RelativeLayout>
    可以發現非常簡單,只有一個主要的CropView,這就是uCrop框架為我們提供的。
2. 程式碼編寫
@Override
protected void initViews() {
	initToolBar();

	mGestureCropImageView = mUCropView.getCropImageView();
	mOverlayView = mUCropView.getOverlayView();

	// 設定允許縮放
	mGestureCropImageView.setScaleEnabled(true);
	// 設定禁止旋轉
	mGestureCropImageView.setRotateEnabled(false);
	// 設定外部陰影顏色
	mOverlayView.setDimmedColor(Color.parseColor("#AA000000"));
	// 設定周圍陰影是否為橢圓(如果false則為矩形)
	mOverlayView.setOvalDimmedLayer(false);
	// 設定顯示裁剪邊框
	mOverlayView.setShowCropFrame(true);
	// 設定不顯示裁剪網格
	mOverlayView.setShowCropGrid(false);

	final Intent intent = getIntent();
	setImageData(intent);
}
private void setImageData(Intent intent) {
	Uri inputUri = intent.getParcelableExtra(UCrop.EXTRA_INPUT_URI);
	mOutputUri = intent.getParcelableExtra(UCrop.EXTRA_OUTPUT_URI);

	if (inputUri != null && mOutputUri != null) {
		try {
			mGestureCropImageView.setImageUri(inputUri);
		} catch (Exception e) {
			setResultException(e);
			finish();
		}
	} else {
		setResultException(new NullPointerException("Both input and output Uri must be specified"));
		finish();
	}

	// 設定裁剪寬高比
	if (intent.getBooleanExtra(UCrop.EXTRA_ASPECT_RATIO_SET, false)) {
		float aspectRatioX = intent.getFloatExtra(UCrop.EXTRA_ASPECT_RATIO_X, 0);
		float aspectRatioY = intent.getFloatExtra(UCrop.EXTRA_ASPECT_RATIO_Y, 0);

		if (aspectRatioX > 0 && aspectRatioY > 0) {
			mGestureCropImageView.setTargetAspectRatio(aspectRatioX / aspectRatioY);
		} else {
			mGestureCropImageView.setTargetAspectRatio(CropImageView.SOURCE_IMAGE_ASPECT_RATIO);
		}
	}

	// 設定裁剪的最大寬高
	if (intent.getBooleanExtra(UCrop.EXTRA_MAX_SIZE_SET, false)) {
		int maxSizeX = intent.getIntExtra(UCrop.EXTRA_MAX_SIZE_X, 0);
		int maxSizeY = intent.getIntExtra(UCrop.EXTRA_MAX_SIZE_Y, 0);

		if (maxSizeX > 0 && maxSizeY > 0) {
			mGestureCropImageView.setMaxResultImageSizeX(maxSizeX);
			mGestureCropImageView.setMaxResultImageSizeY(maxSizeY);
		} else {
			Log.w(TAG, "EXTRA_MAX_SIZE_X and EXTRA_MAX_SIZE_Y must be greater than 0");
		}
	}
}
以上為CropView的配置,更多配置請參考專案原始碼。

最重要的,裁剪儲存圖片:
private void cropAndSaveImage() {
	OutputStream outputStream = null;
	try {
		final Bitmap croppedBitmap = mGestureCropImageView.cropImage();
		if (croppedBitmap != null) {
			outputStream = getContentResolver().openOutputStream(mOutputUri);
			croppedBitmap.compress(Bitmap.CompressFormat.JPEG, 85, outputStream);
			croppedBitmap.recycle();

			setResultUri(mOutputUri, mGestureCropImageView.getTargetAspectRatio());
			finish();
		} else {
			setResultException(new NullPointerException("CropImageView.cropImage() returned null."));
		}
	} catch (Exception e) {
		setResultException(e);
		finish();
	} finally {
		BitmapLoadUtils.close(outputStream);
	}
}

PictureSelectFragment處理裁剪成功的返回值

/**
 * 處理剪下成功的返回值
 *
 * @param result
 */
private void handleCropResult(Intent result) {
    deleteTempPhotoFile();
    final Uri resultUri = UCrop.getOutput(result);
    if (null != resultUri && null != mOnPictureSelectedListener) {
        Bitmap bitmap = null;
        try {
            bitmap = MediaStore.Images.Media.getBitmap(mActivity.getContentResolver(), resultUri);
        } catch (FileNotFoundException e) {
            e.printStackTrace();
        } catch (IOException e) {
            e.printStackTrace();
        }
        mOnPictureSelectedListener.onPictureSelected(resultUri, bitmap);
    } else {
        Toast.makeText(mContext, "無法剪下選擇圖片", Toast.LENGTH_SHORT).show();
    }
}

處理裁剪失敗的返回值

/**
 * 處理剪下失敗的返回值
 *
 * @param result
 */
private void handleCropError(Intent result) {
    deleteTempPhotoFile();
    final Throwable cropError = UCrop.getError(result);
    if (cropError != null) {
        Log.e(TAG, "handleCropError: ", cropError);
        Toast.makeText(mContext, cropError.getMessage(), Toast.LENGTH_LONG).show();
    } else {
        Toast.makeText(mContext, "無法剪下選擇圖片", Toast.LENGTH_SHORT).show();
    }
}

這裡設定了選擇的回撥介面,便於封裝抽取。

/**
 * 圖片選擇的回撥介面
 */
public interface OnPictureSelectedListener {
    /**
     * 圖片選擇的監聽回撥
     *
     * @param fileUri
     * @param bitmap
     */
    void onPictureSelected(Uri fileUri, Bitmap bitmap);
}


經過五、六、七步驟,我們的PictureSelectFragment就搞定了,在使用的時候只要繼承它,幾行程式碼就搞定了。

九、裁剪樣式


    根據不同的配置可以實現裁剪不同樣式,以下為幾種常用的樣式,當然你也可以自己去設定其他樣式。樣式配置修改CropActivity的initCropView();
 

樣式一

    

/**
 * 初始化裁剪View
 */
private void initCropView() {
	// 設定允許縮放
	mGestureCropImageView.setScaleEnabled(true);
	// 設定禁止旋轉
	mGestureCropImageView.setRotateEnabled(false);

	// 設定外部陰影顏色
	mOverlayView.setDimmedColor(Color.parseColor("#AA000000"));
	// 設定周圍陰影是否為橢圓(如果false則為矩形)
	mOverlayView.setOvalDimmedLayer(false);
	// 設定顯示裁剪邊框
	mOverlayView.setShowCropFrame(true);
	// 設定不顯示裁剪網格
	mOverlayView.setShowCropGrid(false);

	final Intent intent = getIntent();
	setImageData(intent);
}

樣式二

    

/**
 * 初始化裁剪View
 */
private void initCropView() {
    // 設定允許縮放
    mGestureCropImageView.setScaleEnabled(true);
    // 設定禁止旋轉
    mGestureCropImageView.setRotateEnabled(false);

    // 設定外部陰影顏色
    mOverlayView.setDimmedColor(Color.parseColor("#AA000000"));
    // 設定周圍陰影是否為橢圓(如果false則為矩形)
    mOverlayView.setOvalDimmedLayer(false);
    // 設定顯示裁剪邊框
    mOverlayView.setShowCropFrame(true);
    // 設定顯示裁剪網格
    mOverlayView.setShowCropGrid(true);
    // 設定裁剪網格的行數
    mOverlayView.setCropGridRowCount(2);
    // 設定裁剪網格的列數
    mOverlayView.setCropGridColumnCount(2);

    final Intent intent = getIntent();
    setImageData(intent);
}

樣式三

    

/**
 * 初始化裁剪View
 */
private void initCropView() {
    // 設定允許縮放
    mGestureCropImageView.setScaleEnabled(true);
    // 設定禁止旋轉
    mGestureCropImageView.setRotateEnabled(false);

    // 設定外部陰影顏色
    mOverlayView.setDimmedColor(Color.parseColor("#AA000000"));
    // 設定周圍陰影是否為橢圓(如果false則為矩形)
    mOverlayView.setOvalDimmedLayer(true);
    // 設定顯示裁剪邊框
    mOverlayView.setShowCropFrame(true);
    // 設定不顯示裁剪網格
    mOverlayView.setShowCropGrid(false);

    final Intent intent = getIntent();
    setImageData(intent);
}


樣式四

   
/**
 * 初始化裁剪View
 */
private void initCropView() {
    // 設定允許縮放
    mGestureCropImageView.setScaleEnabled(true);
    // 設定禁止旋轉
    mGestureCropImageView.setRotateEnabled(false);

    // 設定外部陰影顏色
    mOverlayView.setDimmedColor(Color.parseColor("#AA000000"));
    // 設定周圍陰影是否為橢圓(如果false則為矩形)
    mOverlayView.setOvalDimmedLayer(true);
    // 設定不顯示裁剪邊框
    mOverlayView.setShowCropFrame(false);
    // 設定不顯示裁剪網格
    mOverlayView.setShowCropGrid(false);

    final Intent intent = getIntent();
    setImageData(intent);
}

十、PictureSelectFragment使用

// 設定圖片點選監聽
mPictureIv.setOnClickListener(new View.OnClickListener() {
    @Override
    public void onClick(View v) {
        selectPicture();
    }
});
// 設定裁剪圖片結果監聽
setOnPictureSelectedListener(new OnPictureSelectedListener() {
    @Override
    public void onPictureSelected(Uri fileUri, Bitmap bitmap) {
        mPictureIv.setImageBitmap(bitmap);

        String filePath = fileUri.getEncodedPath();
        String imagePath = Uri.decode(filePath);
        Toast.makeText(mContext, "圖片已經儲存到:" + imagePath, Toast.LENGTH_LONG).show();
    }
});

OK,經過我們上面的封裝及基類抽取,在使用的時候還是非常簡單的。

十一、下載傳送門

    原始碼及示例

十二、結語

    該篇主要講解了在Android客戶端如何裁剪拍照及選擇的圖片,下篇《Android 上傳圖片到JavaWeb伺服器》將詳細說明Android端是如何上傳圖片到JavaWeb伺服器。