2. 程式人生 > >iOS開發RSA加密 和 解密

iOS開發RSA加密 和 解密

阿新 • • 發佈：2019-01-30

在iOS中使用RSA加密解密，需要用到.der和.p12字尾格式的檔案，其中.der格式的檔案存放的是公鑰（Public key）用於加密，.p12格式的檔案存放的是私鑰（Private key）用於解密. 首先需要先生成這些檔案，然後再將檔案匯入工程使用，不多說，開始做！

一、使用openssl生成所需祕鑰檔案

生成環境是在mac系統下，使用openssl進行生成，首先開啟終端，按下面這些步驟依次來做：

1. 生成模長為1024bit的私鑰檔案private_key.pem 
openssl genrsa -out private_key.pem 1024
2. 生成證書請求檔案rsaCertReq.csr
openssl req -new -key private_key.pem -out rsaCerReq.csr

注意：這一步會提示輸入國家、省份、mail等資訊，可以根據實際情況填寫，或者全部不用填寫，直接全部敲回車.

3. 生成證書rsaCert.crt，並設定有效時間為1年
openssl x509 -req -days 3650 -in rsaCerReq.csr -signkey private_key.pem -out rsaCert.crt
4. 生成供iOS使用的公鑰檔案public_key.der
openssl x509 -outform der -in rsaCert.crt -out
 
 public_key.der
5. 生成供iOS使用的私鑰檔案private_key.p12
openssl pkcs12 -export -out private_key.p12 -inkey private_key.pem -in rsaCert.crt

注意：這一步會提示給私鑰檔案設定密碼，直接輸入想要設定密碼即可，然後敲回車，然後再驗證剛才設定的密碼，再次輸入密碼，然後敲回車，完畢！
在解密時，private_key.p12檔案需要和這裡設定的密碼配合使用，因此需要牢記此密碼.

6. 生成供Java使用的公鑰rsa_public_key.pem
openssl rsa -in private_key.pem -out
 
 rsa_public_key.pem -pubout
7. 生成供Java使用的私鑰pkcs8_private_key.pem
openssl pkcs8 -topk8 -in private_key.pem -out pkcs8_private_key.pem -nocrypt

全部執行成功後，會生成如下檔案，其中public_key.der和private_key.p12就是iOS需要用到的檔案，如下圖：

二、將檔案匯入工程使用

1.新建工程, 並匯入Security.framework框架, 如下圖:
新建工程並新增框架
2.匯入祕鑰檔案

匯入.der和.p12格式的祕鑰檔案, 如下圖:

匯入祕鑰檔案
3.新建用於加密、解密的類RSAEncryptor, 並實現相關方法

新建RSAEncryptor類, 如下圖:

新建用於加密解密的類

下面開始上程式碼, 可以直接複製過去用:
RSAEncryptor.h程式碼如下:

#import <Foundation/Foundation.h>

@interface RSAEncryptor : NSObject

/**
 *  加密方法
 *
 *  @param str   需要加密的字串
 *  @param path  '.der'格式的公鑰檔案路徑
 */
+ (NSString *)encryptString:(NSString *)str publicKeyWithContentsOfFile:(NSString *)path;

/**
 *  解密方法
 *
 *  @param str       需要解密的字串
 *  @param path      '.p12'格式的私鑰檔案路徑
 *  @param password  私鑰檔案密碼
 */
+ (NSString *)decryptString:(NSString *)str privateKeyWithContentsOfFile:(NSString *)path password:(NSString *)password;

/**
 *  加密方法
 *
 *  @param str    需要加密的字串
 *  @param pubKey 公鑰字串
 */
+ (NSString *)encryptString:(NSString *)str publicKey:(NSString *)pubKey;

/**
 *  解密方法
 *
 *  @param str     需要解密的字串
 *  @param privKey 私鑰字串
 */
+ (NSString *)decryptString:(NSString *)str privateKey:(NSString *)privKey;

@end

RSAEncryptor.m程式碼如下:

#import "RSAEncryptor.h"
#import <Security/Security.h>

@implementation RSAEncryptor

static NSString *base64_encode_data(NSData *data){
    data = [data base64EncodedDataWithOptions:0];
    NSString *ret = [[NSString alloc] initWithData:data encoding:NSUTF8StringEncoding];
    return ret;
}

static NSData *base64_decode(NSString *str){
    NSData *data = [[NSData alloc] initWithBase64EncodedString:str options:NSDataBase64DecodingIgnoreUnknownCharacters];
    return data;
}

#pragma mark - 使用'.der'公鑰檔案加密

//加密
+ (NSString *)encryptString:(NSString *)str publicKeyWithContentsOfFile:(NSString *)path{
    if (!str || !path)  return nil;
    return [self encryptString:str publicKeyRef:[self getPublicKeyRefWithContentsOfFile:path]];
}

//獲取公鑰
+ (SecKeyRef)getPublicKeyRefWithContentsOfFile:(NSString *)filePath{
    NSData *certData = [NSData dataWithContentsOfFile:filePath];
    if (!certData) {
        return nil;
    }
    SecCertificateRef cert = SecCertificateCreateWithData(NULL, (CFDataRef)certData);
    SecKeyRef key = NULL;
    SecTrustRef trust = NULL;
    SecPolicyRef policy = NULL;
    if (cert != NULL) {
        policy = SecPolicyCreateBasicX509();
        if (policy) {
            if (SecTrustCreateWithCertificates((CFTypeRef)cert, policy, &trust) == noErr) {
                SecTrustResultType result;
                if (SecTrustEvaluate(trust, &result) == noErr) {
                    key = SecTrustCopyPublicKey(trust);
                }
            }
        }
    }
    if (policy) CFRelease(policy);
    if (trust) CFRelease(trust);
    if (cert) CFRelease(cert);
    return key;
}

+ (NSString *)encryptString:(NSString *)str publicKeyRef:(SecKeyRef)publicKeyRef{
    if(![str dataUsingEncoding:NSUTF8StringEncoding]){
        return nil;
    }
    if(!publicKeyRef){
        return nil;
    }
    NSData *data = [self encryptData:[str dataUsingEncoding:NSUTF8StringEncoding] withKeyRef:publicKeyRef];
    NSString *ret = base64_encode_data(data);
    return ret;
}

#pragma mark - 使用'.12'私鑰檔案解密

//解密
+ (NSString *)decryptString:(NSString *)str privateKeyWithContentsOfFile:(NSString *)path password:(NSString *)password{
    if (!str || !path) return nil;
    if (!password) password = @"";
    return [self decryptString:str privateKeyRef:[self getPrivateKeyRefWithContentsOfFile:path password:password]];
}

//獲取私鑰
+ (SecKeyRef)getPrivateKeyRefWithContentsOfFile:(NSString *)filePath password:(NSString*)password{
    
    NSData *p12Data = [NSData dataWithContentsOfFile:filePath];
    if (!p12Data) {
        return nil;
    }
    SecKeyRef privateKeyRef = NULL;
    NSMutableDictionary * options = [[NSMutableDictionary alloc] init];
    [options setObject: password forKey:(__bridge id)kSecImportExportPassphrase];
    CFArrayRef items = CFArrayCreate(NULL, 0, 0, NULL);
    OSStatus securityError = SecPKCS12Import((__bridge CFDataRef) p12Data, (__bridge CFDictionaryRef)options, &items);
    if (securityError == noErr && CFArrayGetCount(items) > 0) {
        CFDictionaryRef identityDict = CFArrayGetValueAtIndex(items, 0);
        SecIdentityRef identityApp = (SecIdentityRef)CFDictionaryGetValue(identityDict, kSecImportItemIdentity);
        securityError = SecIdentityCopyPrivateKey(identityApp, &privateKeyRef);
        if (securityError != noErr) {
            privateKeyRef = NULL;
        }
    }
    CFRelease(items);
    
    return privateKeyRef;
}

+ (NSString *)decryptString:(NSString *)str privateKeyRef:(SecKeyRef)privKeyRef{
    NSData *data = [[NSData alloc] initWithBase64EncodedString:str options:NSDataBase64DecodingIgnoreUnknownCharacters];
    if (!privKeyRef) {
        return nil;
    }
    data = [self decryptData:data withKeyRef:privKeyRef];
    NSString *ret = [[NSString alloc] initWithData:data encoding:NSUTF8StringEncoding];
    return ret;
}

#pragma mark - 使用公鑰字串加密

/* START: Encryption with RSA public key */

//使用公鑰字串加密
+ (NSString *)encryptString:(NSString *)str publicKey:(NSString *)pubKey{
    NSData *data = [self encryptData:[str dataUsingEncoding:NSUTF8StringEncoding] publicKey:pubKey];
    NSString *ret = base64_encode_data(data);
    return ret;
}

+ (NSData *)encryptData:(NSData *)data publicKey:(NSString *)pubKey{
    if(!data || !pubKey){
        return nil;
    }
    SecKeyRef keyRef = [self addPublicKey:pubKey];
    if(!keyRef){
        return nil;
    }
    return [self encryptData:data withKeyRef:keyRef];
}

+ (SecKeyRef)addPublicKey:(NSString *)key{
    NSRange spos = [key rangeOfString:@"-----BEGIN PUBLIC KEY-----"];
    NSRange epos = [key rangeOfString:@"-----END PUBLIC KEY-----"];
    if(spos.location != NSNotFound && epos.location != NSNotFound){
        NSUInteger s = spos.location + spos.length;
        NSUInteger e = epos.location;
        NSRange range = NSMakeRange(s, e-s);
        key = [key substringWithRange:range];
    }
    key = [key stringByReplacingOccurrencesOfString:@"\r" withString:@""];
    key = [key stringByReplacingOccurrencesOfString:@"\n" withString:@""];
    key = [key stringByReplacingOccurrencesOfString:@"\t" withString:@""];
    key = [key stringByReplacingOccurrencesOfString:@" "  withString:@""];
    
    // This will be base64 encoded, decode it.
    NSData *data = base64_decode(key);
    data = [self stripPublicKeyHeader:data];
    if(!data){
        return nil;
    }
    
    //a tag to read/write keychain storage
    NSString *tag = @"RSAUtil_PubKey";
    NSData *d_tag = [NSData dataWithBytes:[tag UTF8String] length:[tag length]];
    
    // Delete any old lingering key with the same tag
    NSMutableDictionary *publicKey = [[NSMutableDictionary alloc] init];
    [publicKey setObject:(__bridge id) kSecClassKey forKey:(__bridge id)kSecClass];
    [publicKey setObject:(__bridge id) kSecAttrKeyTypeRSA forKey:(__bridge id)kSecAttrKeyType];
    [publicKey setObject:d_tag forKey:(__bridge id)kSecAttrApplicationTag];
    SecItemDelete((__bridge CFDictionaryRef)publicKey);
    
    // Add persistent version of the key to system keychain
    [publicKey setObject:data forKey:(__bridge id)kSecValueData];
    [publicKey setObject:(__bridge id) kSecAttrKeyClassPublic forKey:(__bridge id)
     kSecAttrKeyClass];
    [publicKey setObject:[NSNumber numberWithBool:YES] forKey:(__bridge id)
     kSecReturnPersistentRef];
    
    CFTypeRef persistKey = nil;
    OSStatus status = SecItemAdd((__bridge CFDictionaryRef)publicKey, &persistKey);
    if (persistKey != nil){
        CFRelease(persistKey);
    }
    if ((status != noErr) && (status != errSecDuplicateItem)) {
        return nil;
    }
    
    [publicKey removeObjectForKey:(__bridge id)kSecValueData];
    [publicKey removeObjectForKey:(__bridge id)kSecReturnPersistentRef];
    [publicKey setObject:[NSNumber numberWithBool:YES] forKey:(__bridge id)kSecReturnRef];
    [publicKey setObject:(__bridge id) kSecAttrKeyTypeRSA forKey:(__bridge id)kSecAttrKeyType];
    
    // Now fetch the SecKeyRef version of the key
    SecKeyRef keyRef = nil;
    status = SecItemCopyMatching((__bridge CFDictionaryRef)publicKey, (CFTypeRef *)&keyRef);
    if(status != noErr){
        return nil;
    }
    return keyRef;
}

+ (NSData *)stripPublicKeyHeader:(NSData *)d_key{
    // Skip ASN.1 public key header
    if (d_key == nil) return(nil);
    
    unsigned long len = [d_key length];
    if (!len) return(nil);
    
    unsigned char *c_key = (unsigned char *)[d_key bytes];
    unsigned int  idx     = 0;
    
    if (c_key[idx++] != 0x30) return(nil);
    
    if (c_key[idx] > 0x80) idx += c_key[idx] - 0x80 + 1;
    else idx++;
    
    // PKCS #1 rsaEncryption szOID_RSA_RSA
    static unsigned char seqiod[] =
    { 0x30,   0x0d, 0x06, 0x09, 0x2a, 0x86, 0x48, 0x86, 0xf7, 0x0d, 0x01, 0x01,
        0x01, 0x05, 0x00 };
    if (memcmp(&c_key[idx], seqiod, 15)) return(nil);
    
    idx += 15;
    
    if (c_key[idx++] != 0x03) return(nil);
    
    if (c_key[idx] > 0x80) idx += c_key[idx] - 0x80 + 1;
    else idx++;
    
    if (c_key[idx++] != '\0') return(nil);
    
    // Now make a new NSData from this buffer
    return ([NSData dataWithBytes:&c_key[idx] length:len - idx]);
}

+ (NSData *)encryptData:(NSData *)data withKeyRef:(SecKeyRef) keyRef{
    const uint8_t *srcbuf = (const uint8_t *)[data bytes];
    size_t srclen = (size_t)data.length;
    
    size_t block_size = SecKeyGetBlockSize(keyRef) * sizeof(uint8_t);
    void *outbuf = malloc(block_size);
    size_t src_block_size = block_size - 11;
    
    NSMutableData *ret = [[NSMutableData alloc] init];
    for(int idx=0; idx<srclen; idx+=src_block_size){
        //NSLog(@"%d/%d block_size: %d", idx, (int)srclen, (int)block_size);
        size_t data_len = srclen - idx;
        if(data_len > src_block_size){
            data_len = src_block_size;
        }
        
        size_t outlen = block_size;
        OSStatus status = noErr;
        status = SecKeyEncrypt(keyRef,
                               kSecPaddingPKCS1,
                               srcbuf + idx,
                               data_len,
                               outbuf,
                               &outlen
                               );
        if (status != 0) {
            NSLog(@"SecKeyEncrypt fail. Error Code: %d", status);
            ret = nil;
            break;
        }else{
            [ret appendBytes:outbuf length:outlen];
        }
    }
    
    free(outbuf);
    CFRelease(keyRef);
    return ret;
}

/* END: Encryption with RSA public key */

#pragma mark - 使用私鑰字串解密

/* START: Decryption with RSA private key */

//使用私鑰字串解密
+ (NSString *)decryptString:(NSString *)str privateKey:(NSString *)privKey{
    if (!str) return nil;
    NSData *data = [[NSData alloc] initWithBase64EncodedString:str options:NSDataBase64DecodingIgnoreUnknownCharacters];
    data = [self decryptData:data privateKey:privKey];
    NSString *ret = [[NSString alloc] initWithData:data encoding:NSUTF8StringEncoding];
    return ret;
}

+ (NSData *)decryptData:(NSData *)data privateKey:(NSString *)privKey{
    if(!data || !privKey){
        return nil;
    }
    SecKeyRef keyRef = [self addPrivateKey:privKey];
    if(!keyRef){
        return nil;
    }
    return [self decryptData:data withKeyRef:keyRef];
}

+ (SecKeyRef)addPrivateKey:(NSString *)key{
    NSRange spos = [key rangeOfString:@"-----BEGIN RSA PRIVATE KEY-----"];
    NSRange epos = [key rangeOfString:@"-----END RSA PRIVATE KEY-----"];
    if(spos.location != NSNotFound && epos.location != NSNotFound){
        NSUInteger s = spos.location + spos.length;
        NSUInteger e = epos.location;
        NSRange range = NSMakeRange(s, e-s);
        key = [key substringWithRange:range];
    }
    key = [key stringByReplacingOccurrencesOfString:@"\r" withString:@""];
    key = [key stringByReplacingOccurrencesOfString:@"\n" withString:@""];
    key = [key stringByReplacingOccurrencesOfString:@"\t" withString:@""];
    key = [key stringByReplacingOccurrencesOfString:@" "  withString:@""];
    
    // This will be base64 encoded, decode it.
    NSData *data = base64_decode(key);
    data = [self stripPrivateKeyHeader:data];
    if(!data){
        return nil;
    }
    
    //a tag to read/write keychain storage
    NSString *tag = @"RSAUtil_PrivKey";
    NSData *d_tag = [NSData dataWithBytes:[tag UTF8String] length:[tag length]];
    
    // Delete any old lingering key with the same tag
    NSMutableDictionary *privateKey = [[NSMutableDictionary alloc] init];
    [privateKey setObject:(__bridge id) kSecClassKey forKey:(__bridge id)kSecClass];
    [privateKey setObject:(__bridge id) kSecAttrKeyTypeRSA forKey:(__bridge id)kSecAttrKeyType];
    [privateKey setObject:d_tag forKey:(__bridge id)kSecAttrApplicationTag];
    SecItemDelete((__bridge CFDictionaryRef)privateKey);
    
    // Add persistent version of the key to system keychain
    [privateKey setObject:data forKey:(__bridge id)kSecValueData];
    [privateKey setObject:(__bridge id) kSecAttrKeyClassPrivate forKey:(__bridge id)
     kSecAttrKeyClass];
    [privateKey setObject:[NSNumber numberWithBool:YES] forKey:(__bridge id)
     kSecReturnPersistentRef];
    
    CFTypeRef persistKey = nil;
    OSStatus status = SecItemAdd((__bridge CFDictionaryRef)privateKey, &persistKey);
    if (persistKey != nil){
        CFRelease(persistKey);
    }
    if ((status != noErr) && (status != errSecDuplicateItem)) {
        return nil;
    }
    
    [privateKey removeObjectForKey:(__bridge id)kSecValueData];
    [privateKey removeObjectForKey:(__bridge id)kSecReturnPersistentRef];
    [privateKey setObject:[NSNumber numberWithBool:YES] forKey:(__bridge id)kSecReturnRef];
    [privateKey setObject:(__bridge id) kSecAttrKeyTypeRSA forKey:(__bridge id)kSecAttrKeyType];
    
    // Now fetch the SecKeyRef version of the key
    SecKeyRef keyRef = nil;
    status = SecItemCopyMatching((__bridge CFDictionaryRef)privateKey, (CFTypeRef *)&keyRef);
    if(status != noErr){
        return nil;
    }
    return keyRef;
}

+ (NSData *)stripPrivateKeyHeader:(NSData *)d_key{
    // Skip ASN.1 private key header
    if (d_key == nil) return(nil);
    
    unsigned long len = [d_key length];
    if (!len) return(nil);
    
    unsigned char *c_key = (unsigned char *)[d_key bytes];
    unsigned int  idx     = 22; //magic byte at offset 22
    
    if (0x04 != c_key[idx++]) return nil;
    
    //calculate length of the key
    unsigned int c_len = c_key[idx++];
    int det = c_len & 0x80;
    if (!det) {
        c_len = c_len & 0x7f;
    } else {
        int byteCount = c_len & 0x7f;
        if (byteCount + idx > len) {
            //rsa length field longer than buffer
            return nil;
        }
        unsigned int accum = 0;
        unsigned char *ptr = &c_key[idx];
        idx += byteCount;
        while (byteCount) {
            accum = (accum << 8) + *ptr;
            ptr++;
            byteCount--;
        }
        c_len = accum;
    }
    
    // Now make a new NSData from this buffer
    return [d_key subdataWithRange:NSMakeRange(idx, c_len)];
}

+ (NSData *)decryptData:(NSData *)data withKeyRef:(SecKeyRef) keyRef{
    const uint8_t *srcbuf = (const uint8_t *)[data bytes];
    size_t srclen = (size_t)data.length;
    
    size_t block_size = SecKeyGetBlockSize(keyRef) * sizeof(uint8_t);
    UInt8 *outbuf = malloc(block_size);
    size_t src_block_size = block_size;
    
    NSMutableData *ret = [[NSMutableData alloc] init];
    for(int idx=0; idx<srclen; idx+=src_block_size){
        //NSLog(@"%d/%d block_size: %d", idx, (int)srclen, (int)block_size);
        size_t data_len = srclen - idx;
        if(data_len > src_block_size){
            data_len = src_block_size;
        }
        
        size_t outlen = block_size;
        OSStatus status = noErr;
        status = SecKeyDecrypt(keyRef,
                               kSecPaddingNone,
                               srcbuf + idx,
                               data_len,
                               outbuf,
                               &outlen
                               );
        if (status != 0) {
            NSLog(@"SecKeyEncrypt fail. Error Code: %d", status);
            ret = nil;
            break;
        }else{
            //the actual decrypted data is in the middle, locate it!
            int idxFirstZero = -1;
            int idxNextZero = (int)outlen;
            for ( int i = 0; i < outlen; i++ ) {
                if ( outbuf[i] == 0 ) {
                    if ( idxFirstZero < 0 ) {
                        idxFirstZero = i;
                    } else {
                        idxNextZero = i;
                        break;
                    }
                }
            }
            
            [ret appendBytes:&outbuf[idxFirstZero+1] length:idxNextZero-idxFirstZero-1];
        }
    }
    
    free(outbuf);
    CFRelease(keyRef);
    return ret;
}

/* END: Decryption with RSA private key */

@end
4. 測試加密、解密

首先先測試使用.der和.p12祕鑰檔案進行加密、解密, 在ViewController.m中進行測試, 程式碼如下:

#import "ViewController.h"
#import "RSAEncryptor.h"

@interface ViewController ()

@end

@implementation ViewController

- (void)viewDidLoad {
    [super viewDidLoad];
    
    //原始資料
    NSString *originalString = @"這是一段將要使用'.der'檔案加密的字串!";
    
    //使用.der和.p12中的公鑰私鑰加密解密
    NSString *public_key_path = [[NSBundle mainBundle] pathForResource:@"public_key.der" ofType:nil];
    NSString *private_key_path = [[NSBundle mainBundle] pathForResource:@"private_key.p12" ofType:nil];
    
    NSString *encryptStr = [RSAEncryptor encryptString:originalString publicKeyWithContentsOfFile:public_key_path];
    NSLog(@"加密前:%@", originalString);
    NSLog(@"加密後:%@", encryptStr);
    NSLog(@"解密後:%@", [RSAEncryptor decryptString:encryptStr privateKeyWithContentsOfFile:private_key_path password:@"123456"]);
    
}

- (void)didReceiveMemoryWarning {
    [super didReceiveMemoryWarning];
    // Dispose of any resources that can be recreated.
}

@end

執行後, 輸出資訊如下:


輸出結果

可以看到已經可以成功加密、解密了.

下面接著測試使用祕鑰字串進行加密、解密, 那麼祕鑰字串從哪裡來? 可以來這裡:http://web.chacuo.net/netrsakeypair, 這是一個線上生成RSA祕鑰的網站, 生成公鑰和祕鑰後, 複製出來用於測試. 然後在ViewController.m中使用RSAEntryptor.h標頭檔案中對應的加密方法進行加密, ViewController.m中程式碼如下:

#import "ViewController.h"
#import "RSAEncryptor.h"

@interface ViewController ()

@end

@implementation ViewController

- (void)viewDidLoad {
    [super viewDidLoad];
    
    //原始資料
    NSString *originalString = @"這是一段將要使用'祕鑰字串'進行加密的字串!";
    
    //使用字串格式的公鑰私鑰加密解密
    NSString *encryptStr = [RSAEncryptor encryptString:originalString publicKey:@"MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQDTbZ6cNH9PgdF60aQKveLz3FTalyzHQwbp601y77SzmGHX3F5NoVUZbdK7UMdoCLK4FBziTewYD9DWvAErXZo9BFuI96bAop8wfl1VkZyyHTcznxNJFGSQd/B70/ExMgMBpEwkAAdyUqIjIdVGh1FQK/4acwS39YXwbS+IlHsPSQIDAQAB"];
    
    NSLog(@"加密前:%@", originalString);
    NSLog(@"加密後:%@", encryptStr);
    NSLog(@"解密後:%@", [RSAEncryptor decryptString:encryptStr privateKey:@"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"]);
    
}

- (void)didReceiveMemoryWarning {
    [super didReceiveMemoryWarning];
    // Dispose of any resources that can be recreated.
}

@end

執行後, 輸出資訊如下:

輸出結果

可以看到,也成功加密、解密了.

至此, RSA加密演示完畢!

相關推薦

iOS開發RSA加密 和 解密

在iOS中使用RSA加密解密，需要用到.der和.p12字尾格式的檔案，其中.der格式的檔案存放的是公鑰（Public key）用於加密，.p12格式的檔案存放的是私鑰（Private key）用於解密. 首先需要先生成這些檔案，然後再將檔案匯入工程使用，不多說，開始做！ 一、使用openssl生成所需祕鑰

通過ios實現RSA加密和解密

在加密和解密中，我們需要了解的知識有什麼事openssl；RSA加密演算法的基本原理；如何通過openssl生成最後我們需要的der和p12檔案。 廢話不多說，直接寫步驟： 第一步：openssl來生成公鑰和私鑰證書，最後需要得到公鑰證書和私鑰證書。這是在mac OX系統

iOS開發 RSA加密解密與後臺之間的雙向加密詳解

序言 因為專案中需要用到RSA加密，剛開始也是有點亂，這兩天也整理的差不多了，希望能幫到大家。 這次先上程式碼，我想大部分人肯定是著急解決問題，所以不要廢話太多。 iOS端 後臺是PHP，給我了一段公鑰和他用私鑰加密後的base64編碼，讓我先解一下，看看能否解出(請先不要糾結為什麼給我公鑰解密，公鑰私鑰都

iOS RSA加密和解密

package com.modules.Encryptor; import java.io.BufferedReader; import java.io.FileReader; import java.io.IOException; import java.io.InputStream;

RSA加密和解密工具類

min ktr pan util 解密工具 verify 生成器 ace dmi 1 import org.apache.commons.codec.binary.Base64; 2 3 import javax.crypto.Cipher; 4 imp

golang實現RSA加密和解密

package main import ( "crypto/rsa" "crypto/rand" "crypto/x509" "encoding/pem" "os" "fmt" ) func rsaGenKey(bits int) error { priva

獲取數字證書相關資訊，證書有效性驗證，RSA加密和解密功能之獲取證書相關資訊

//公鑰 private PublicKey pk; /** 後臺將證書以byte陣列的形式傳入 * @param bytes，數字證書crt傳入的byte陣列 * @return */ public InfoEntity getCertificateInfo(

獲取數字證書相關資訊，證書鏈有效性驗證，RSA加密和解密功能之證書鏈有效性驗證

/** * 證書有效性驗證，後臺將證書鏈以byte[]陣列集合的形式傳入 * @param certChain 後臺傳入的證書鏈 * @param cert2Verify 本地需要驗證的證書 * @return */ public int

Android關於RSA加密和解密

新APP用了RSA加密進行傳輸  本來除錯的時候,本地加密解密很愉快  加密方法 public static byte[] encryptData(byte[] data, PublicKey publicKey) { try {

RSA加密和解密實現

根據RSA一堆原理，寫了個實現的程式碼，親測可用，哈哈記錄一下 #include <iostream> #include <cstdio> #include <math.

iOS-OC-3DES加密和解密

+ (NSString*)TripleDES:(NSString*)plainText encryptOrDecrypt:(CCOperation)encryptOrDecrypt { con

RSA加密和解密問題

開始寫部落格完成就是記錄自己的工作內容，感覺比其他的方式更好一些 今天的問題是，大平臺有個介面，是返回一個公鑰的，我需要通過返回的公鑰字串在轉換成PublicKey然後加密資料在傳給大平臺，大平臺會通過私鑰進行解密。解密後會通過我傳入的引數返回給小平臺相應的資料。 直接進入

RSA加密和解密的完整過程

假設A要想B傳送訊息，A會先計算出訊息的訊息摘要，然後使用自己的私鑰加密這段摘要加密，最後將加密後的訊息摘要和訊息一起傳送給B，被加密的訊息摘要就是“簽名”。 B收到訊息後，也會使用和A相同的方法提取訊息摘要，然後使用A的公鑰解密A傳送的來簽名，並與自己計算出來的訊息摘要進行比較。如果相同則說明訊息是A

iOS系統提供的RSA 不對稱加密和解密和對稱加密解密

對iOS平臺下使用CommonCrypto與Security.framework的加密與解密，簽名與簽名的基本技術進行了總結。 主要實現了以下功能 1.非對稱加密演算法 RSA 包含公私鑰的生成、公鑰加密、私鑰解密、私鑰簽名、公鑰驗籤功能。證書資訊的讀取。以及金

iOS開發-Objective-c的AES加密和解密演算法的實現

話不多說，直接上程式碼 .h import <Foundation/Foundation.h> @interface LanAES : NSObject +(NSData *)AES256ParmEncryptWithKey:(NSString *

使用PHP實現RSA演算法的加密和解密

本文提供使用RSA演算法加密解密資料的PHP程式類（簽名和驗籤的實現方式可以檢視使用PHP實現RSA演算法的簽名和驗籤 這篇文章），封裝了格式化公鑰和私鑰檔案的方法，這樣無論使用什麼格式的公鑰或者私鑰都可以正常執行，公鑰加密後使用私鑰解密或者私鑰加密後用公鑰解密

Java安全學習筆記(十一)-RSA演算法加密和解密

RSA演算法是使用整數進行加密和解密運算的， 加密：在RSA公鑰中包含了兩個資訊：公鑰對應的整數e和用於取模的整數n。對於明文數字m,計算密文的公式是： m^e mod n. 解密：跟加密類似，私鑰對應的指數e和用於取模的整數m.其中模m和加密時的加密的模

【iOS】MD5(加密)/AES/Base64加密和解密

MD5 什麼是MD5 Message Digest Algorithm MD5（中文名為訊息摘要演算法第五版）為電腦保安領域廣泛使用的一種雜湊函式，用以提供訊息的完整性保護。MD5的典型應用是對一段資訊（Message）產生資訊摘要（Message-Di

Python的RSA加密和PBE加密

nbsp 信息 bytes 任務 競爭 對手 nco bsp join 最近在寫接口的時候，遇到了需要使用RSA加密和PBE加密的情況，對方公司提供的DEMO都是JAVA的，我需要用python來實現。 在網上搜了一下，python的RSA加密這塊寫的還是比較多的，但是PB

什麽是私有密鑰密碼技術——密鑰加密算法采用同一把密鑰進行加密和解密

解密 網絡安全 位操作 線性復雜 對稱 大量 控制 全局 相位 什麽是私有密鑰密碼技術 私有密鑰(Symmetric Key)，又叫對稱密鑰。密鑰加密算法采用同一把密鑰進行加密和解密。它的優點是加密和解密速度非常快，但密鑰的分發和管理比較困難。信息的發送者和接收者必須明確同