[html] view plain copy
# Redis configuration file example  
  
   
  
# Note on units: when memory size is needed, it is possible to specifiy  
  
# it in the usual form of 1k 5GB 4M and so forth:  
  
#  
  
# 1k => 1000 bytes  
  
# 1kb => 1024 bytes  
  
# 1m => 1000000 bytes  
  
# 1mb => 1024*1024 bytes  
  
# 1g => 1000000000 bytes  
  
# 1gb => 1024*1024*1024 bytes  
  
#  
  
# units are case insensitive so 1GB 1Gb 1gB are all the same.  
  
   
  
# By default Redis does not run as a daemon. Use 'yes' if you need it.  
  
# Note that Redis will write a pid file in /var/run/redis.pid when daemonized.  
  
daemonize no    
  
Redis預設不是以守護程序的方式執行，可以通過該配置項修改，使用yes啟用守護程序  
  
   
  
# When running daemonized, Redis writes a pid file in /var/run/redis.pid by  
  
# default. You can specify a custom pid file location here.  
  
pidfile /var/run/redis.pid  
  
當Redis以守護程序方式執行時，Redis預設會把pid寫入/var/run/redis.pid檔案，可以通過pidfile指定  
  
# Accept connections on the specified port, default is 6379.  
  
# If port 0 is specified Redis will not listen on a TCP socket.  
  
port 6379  
  
指定Redis監聽埠，預設埠為6379  
  
# If you want you can bind a single interface, if the bind option is not  
  
# specified all the interfaces will listen for incoming connections.  
  
#  
  
# bind 127.0.0.1  
  
繫結的主機地址  
  
# Specify the path for the unix socket that will be used to listen for  
  
# incoming connections. There is no default, so Redis will not listen  
  
# on a unix socket when not specified.  
  
#  
  
# unixsocket /tmp/redis.sock  
  
# unixsocketperm 755  
  
   
  
# Close the connection after a client is idle for N seconds (0 to disable)  
  
timeout 0  
  
當 客戶端閒置多長時間後關閉連線，如果指定為0，表示關閉該功能  
  
# Set server verbosity to 'debug'  
  
# it can be one of:  
  
# debug (a lot of information, useful for development/testing)  
  
# verbose (many rarely useful info, but not a mess like the debug level)  
  
# notice (moderately verbose, what you want in production probably)  
  
# warning (only very important / critical messages are logged)  
  
loglevel verbose  
  
指定日誌記錄級別，Redis總共支援四個級別：debug、verbose、notice、warning，預設為verbose  
  
# Specify the log file name. Also 'stdout' can be used to force  
  
# Redis to log on the standard output. Note that if you use standard  
  
# output for logging but daemonize, logs will be sent to /dev/null  
  
logfile stdout  
  
日誌記錄方式，預設為標準輸出，如果配置Redis為守護程序方式執行，而這裡又配置為日誌記錄方式為標準輸出，則日誌將會發送給/dev/null  
  
# To enable logging to the system logger, just set 'syslog-enabled' to yes,  
  
# and optionally update the other syslog parameters to suit your needs.  
  
# syslog-enabled no  
  
   
  
# Specify the syslog identity.  
  
# syslog-ident redis  
  
   
  
# Specify the syslog facility.  Must be USER or between LOCAL0-LOCAL7.  
  
# syslog-facility local0  
  
   
  
# Set the number of databases. The default database is DB 0, you can select  
  
# a different one on a per-connection basis using SELECT  where  
  
# dbid is a number between 0 and 'databases'-1  
  
databases 16  
  
設定資料庫的數量，預設資料庫為0，可以使用SELECT 命令在連線上指定資料庫id  
  
################################ SNAPSHOTTING  #################################  
  
#  
  
# Save the DB on disk:  
  
#  
  
#   save   
  
#  
  
#   Will save the DB if both the given number of seconds and the given  
  
#   number of write operations against the DB occurred.  
  
#  
  
#   In the example below the behaviour will be to save:  
  
#   after 900 sec (15 min) if at least 1 key changed  
  
#   after 300 sec (5 min) if at least 10 keys changed  
  
#   after 60 sec if at least 10000 keys changed  
  
#  
  
#   Note: you can disable saving at all commenting all the "save" lines.  
  
   
  
save 900 1  
  
save 300 10  
  
save 60 10000  
  
分別表示900秒（15分鐘）內有1個更改，300秒（5分鐘）內有10個更改以及60秒內有10000個更改。  
  
指定在多長時間內，有多少次更新操作，就將資料同步到資料檔案，可以多個條件配合  
  
# Compress string objects using LZF when dump .rdb databases?  
  
# For default that's set to 'yes' as it's almost always a win.  
  
# If you want to save some CPU in the saving child set it to 'no' but  
  
# the dataset will likely be bigger if you have compressible values or keys.  
  
rdbcompression yes  
  
指定儲存至本地資料庫時是否壓縮資料，預設為yes，Redis採用LZF壓縮，如果為了節省CPU時間，可以關閉該選項，但會導致資料庫檔案變的巨大  
  
# The filename where to dump the DB  
  
dbfilename dump.rdb  
  
指定本地資料庫檔名，預設值為dump.rdb  
  
# The working directory.  
  
#  
  
# The DB will be written inside this directory, with the filename specified  
  
# above using the 'dbfilename' configuration directive.  
  
#   
  
# Also the Append Only File will be created inside this directory.  
  
#   
  
# Note that you must specify a directory here, not a file name.  
  
dir ./  
  
指定本地資料庫存放目錄  
  
################################# REPLICATION #################################  
  
   
  
# Master-Slave replication. Use slaveof to make a Redis instance a copy of  
  
# another Redis server. Note that the configuration is local to the slave  
  
# so for example it is possible to configure the slave to save the DB with a  
  
# different interval, or to listen to another port, and so on.  
  
#  
  
# slaveof   
  
slaveof  設定當本機為slav服務時，設定master服務的IP地址及埠，在Redis啟動時，它會自動從master進行資料同步  
  
# If the master is password protected (using the "requirepass" configuration  
  
# directive below) it is possible to tell the slave to authenticate before  
  
# starting the replication synchronization process, otherwise the master will  
  
# refuse the slave request.  
  
#  
  
# masterauth   
  
masterauth  當master服務設定了密碼保護時，slav服務連線master的密碼  
  
# When a slave lost the connection with the master, or when the replication  
  
# is still in progress, the slave can act in two different ways:  
  
#  
  
# 1) if slave-serve-stale-data is set to 'yes' (the default) the slave will  
  
#    still reply to client requests, possibly with out of data data, or the  
  
#    data set may just be empty if this is the first synchronization.  
  
#  
  
# 2) if slave-serve-stale data is set to 'no' the slave will reply with  
  
#    an error "SYNC with master in progress" to all the kind of commands  
  
#    but to INFO and SLAVEOF.  
  
#  
  
slave-serve-stale-data yes  
  
   
  
# Slaves send PINGs to server in a predefined interval. It's possible to change  
  
# this interval with the repl_ping_slave_period option. The default value is 10  
  
# seconds.  
  
#  
  
# repl-ping-slave-period 10  
  
   
  
# The following option sets a timeout for both Bulk transfer I/O timeout and  
  
# master data or ping response timeout. The default value is 60 seconds.  
  
#  
  
# It is important to make sure that this value is greater than the value  
  
# specified for repl-ping-slave-period otherwise a timeout will be detected  
  
# every time there is low traffic between the master and the slave.  
  
#  
  
# repl-timeout 60  
  
   
  
################################## SECURITY ###################################  
  
   
  
# Require clients to issue AUTH  before processing any other  
  
# commands.  This might be useful in environments in which you do not trust  
  
# others with access to the host running redis-server.  
  
#  
  
# This should stay commented out for backward compatibility and because most  
  
# people do not need auth (e.g. they run their own servers).  
  
#   
  
# Warning: since Redis is pretty fast an outside user can try up to  
  
# 150k passwords per second against a good box. This means that you should  
  
# use a very strong password otherwise it will be very easy to break.  
  
#  
  
# requirepass foobared  
  
 requirepass foobared 設定Redis連線密碼，如果配置了連線密碼，客戶端在連線Redis時需要通過AUTH 命令提供密碼，預設關閉  
  
# Command renaming.  
  
#  
  
# It is possilbe to change the name of dangerous commands in a shared  
  
# environment. For instance the CONFIG command may be renamed into something  
  
# of hard to guess so that it will be still available for internal-use  
  
# tools but not available for general clients.  
  
#  
  
# Example:  
  
#  
  
# rename-command CONFIG b840fc02d524045429941cc15f59e41cb7be6c52  
  
#  
  
# It is also possilbe to completely kill a command renaming it into  
  
# an empty string:  
  
#  
  
# rename-command CONFIG ""  
  
   
  
################################### LIMITS ####################################  
  
   
  
# Set the max number of connected clients at the same time. By default there  
  
# is no limit, and it's up to the number of file descriptors the Redis process  
  
# is able to open. The special value '0' means no limits.  
  
# Once the limit is reached Redis will close all the new connections sending  
  
# an error 'max number of clients reached'.  
  
#  
  
# maxclients 128  
  
maxclients 128 設定同一時間最大客戶端連線數，預設無限制，Redis可以同時開啟的客戶端連線數為Redis程序可以開啟的最大檔案描述符數，如果設定 maxclients 0，表示不作限制。當客戶端連線數到達限制時，Redis會關閉新的連線並向客戶端返回max number of clients reached錯誤資訊  
  
# Don't use more memory than the specified amount of bytes.  
  
# When the memory limit is reached Redis will try to remove keys with an  
  
# EXPIRE set. It will try to start freeing keys that are going to expire  
  
# in little time and preserve keys with a longer time to live.  
  
# Redis will also try to remove objects from free lists if possible.  
  
#  
  
# If all this fails, Redis will start to reply with errors to commands  
  
# that will use more memory, like SET, LPUSH, and so on, and will continue  
  
# to reply to most read-only commands like GET.  
  
#  
  
# WARNING: maxmemory can be a good idea mainly if you want to use Redis as a  
  
# 'state' server or cache, not as a real DB. When Redis is used as a real  
  
# database the memory usage will grow over the weeks, it will be obvious if  
  
# it is going to use too much memory in the long run, and you'll have the time  
  
# to upgrade. With maxmemory after the limit is reached you'll start to get  
  
# errors for write operations, and this may even lead to DB inconsistency.  
  
#  
  
# maxmemory   
  
 maxmemory 指定Redis最大記憶體限制，Redis在啟動時會把資料載入到記憶體中，達到最大記憶體後，Redis會先嚐試清除已到期或即將到期的Key，當此方法處理 後，仍然到達最大記憶體設定，將無法再進行寫入操作，但仍然可以進行讀取操作。Redis新的vm機制，會把Key存放記憶體，Value會存放在swap區  
  
# MAXMEMORY POLICY: how Redis will select what to remove when maxmemory  
  
# is reached? You can select among five behavior:  
  
#   
  
# volatile-lru -> remove the key with an expire set using an LRU algorithm  
  
# allkeys-lru -> remove any key accordingly to the LRU algorithm  
  
# volatile-random -> remove a random key with an expire set  
  
# allkeys->random -> remove a random key, any key  
  
# volatile-ttl -> remove the key with the nearest expire time (minor TTL)  
  
# noeviction -> don't expire at all, just return an error on write operations  
  
#   
  
# Note: with all the kind of policies, Redis will return an error on write  
  
#       operations, when there are not suitable keys for eviction.  
  
#  
  
#       At the date of writing this commands are: set setnx setex append  
  
#       incr decr rpush lpush rpushx lpushx linsert lset rpoplpush sadd  
  
#       sinter sinterstore sunion sunionstore sdiff sdiffstore zadd zincrby  
  
#       zunionstore zinterstore hset hsetnx hmset hincrby incrby decrby  
  
#       getset mset msetnx exec sort  
  
#  
  
# The default is:  
  
#  
  
# maxmemory-policy volatile-lru  
  
   
  
# LRU and minimal TTL algorithms are not precise algorithms but approximated  
  
# algorithms (in order to save memory), so you can select as well the sample  
  
# size to check. For instance for default Redis will check three keys and  
  
# pick the one that was used less recently, you can change the sample size  
  
# using the following configuration directive.  
  
#  
  
# maxmemory-samples 3  
  
   
  
############################## APPEND ONLY MODE ###############################  
  
   
  
# By default Redis asynchronously dumps the dataset on disk. If you can live  
  
# with the idea that the latest records will be lost if something like a crash  
  
# happens this is the preferred way to run Redis. If instead you care a lot  
  
# about your data and don't want to that a single record can get lost you should  
  
# enable the append only mode: when this mode is enabled Redis will append  
  
# every write operation received in the file appendonly.aof. This file will  
  
# be read on startup in order to rebuild the full dataset in memory.  
  
#  
  
# Note that you can have both the async dumps and the append only file if you  
  
# like (you have to comment the "save" statements above to disable the dumps).  
  
# Still if append only mode is enabled Redis will load the data from the  
  
# log file at startup ignoring the dump.rdb file.  
  
#  
  
# IMPORTANT: Check the BGREWRITEAOF to check how to rewrite the append  
  
# log file in background when it gets too big.  
  
   
  
appendonly no  
  
appendonly no指定是否在每次更新操作後進行日誌記錄，Redis在預設情況下是非同步的把資料寫入磁碟，如果不開啟，可能會在斷電時導致一段時間內的資料丟失。因為 redis本身同步資料檔案是按上面save條件來同步的，所以有的資料會在一段時間內只存在於記憶體中。預設為no  
  
# The name of the append only file (default: "appendonly.aof")  
  
# appendfilename appendonly.aof  
  
 appendfilename appendonly.aof指定更新日誌檔名，預設為appendonly.aof  
  
# The fsync() call tells the Operating System to actually write data on disk  
  
# instead to wait for more data in the output buffer. Some OS will really flush   
  
# data on disk, some other OS will just try to do it ASAP.  
  
#  
  
# Redis supports three different modes:  
  
#  
  
# no: don't fsync, just let the OS flush the data when it wants. Faster.  
  
# always: fsync after every write to the append only log . Slow, Safest.  
  
# everysec: fsync only if one second passed since the last fsync. Compromise.  
  
#  
  
# The default is "everysec" that's usually the right compromise between  
  
# speed and data safety. It's up to you to understand if you can relax this to  
  
# "no" that will will let the operating system flush the output buffer when  
  
# it wants, for better performances (but if you can live with the idea of  
  
# some data loss consider the default persistence mode that's snapshotting),  
  
# or on the contrary, use "always" that's very slow but a bit safer than  
  
# everysec.  
  
#  
  
# If unsure, use "everysec".  
  
   
  
# appendfsync always  
  
appendfsync everysec  
  
# appendfsync no  
  
指定更新日誌條件，共有3個可選值：  
  
no：表示等作業系統進行資料快取同步到磁碟（快）  
  
always：表示每次更新操作後手動呼叫fsync()將資料寫到磁碟（慢，安全）  
  
everysec：表示每秒同步一次（折衷，預設值）  
  
# When the AOF fsync policy is set to always or everysec, and a background  
  
# saving process (a background save or AOF log background rewriting) is  
  
# performing a lot of I/O against the disk, in some Linux configurations  
  
# Redis may block too long on the fsync() call. Note that there is no fix for  
  
# this currently, as even performing fsync in a different thread will block  
  
# our synchronous write(2) call.  
  
#  
  
# In order to mitigate this problem it's possible to use the following option  
  
# that will prevent fsync() from being called in the main process while a  
  
# BGSAVE or BGREWRITEAOF is in progress.  
  
#  
  
# This means that while another child is saving the durability of Redis is  
  
# the same as "appendfsync none", that in pratical terms means that it is  
  
# possible to lost up to 30 seconds of log in the worst scenario (with the  
  
# default Linux settings).  
  
#   
  
# If you have latency problems turn this to "yes". Otherwise leave it as  
  
# "no" that is the safest pick from the point of view of durability.  
  
no-appendfsync-on-rewrite no  
  
   
  
# Automatic rewrite of the append only file.  
  
# Redis is able to automatically rewrite the log file implicitly calling  
  
# BGREWRITEAOF when the AOF log size will growth by the specified percentage.  
  
#   
  
# This is how it works: Redis remembers the size of the AOF file after the  
  
# latest rewrite (or if no rewrite happened since the restart, the size of  
  
# the AOF at startup is used).  
  
#  
  
# This base size is compared to the current size. If the current size is  
  
# bigger than the specified percentage, the rewrite is triggered. Also  
  
# you need to specify a minimal size for the AOF file to be rewritten, this  
  
# is useful to avoid rewriting the AOF file even if the percentage increase  
  
# is reached but it is still pretty small.  
  
#  
  
# Specify a precentage of zero in order to disable the automatic AOF  
  
# rewrite feature.  
  
   
  
auto-aof-rewrite-percentage 100  
  
auto-aof-rewrite-min-size 64mb  
  
   
  
################################## SLOW LOG ###################################  
  
   
  
# The Redis Slow Log is a system to log queries that exceeded a specified  
  
# execution time. The execution time does not include the I/O operations  
  
# like talking with the client, sending the reply and so forth,  
  
# but just the time needed to actually execute the command (this is the only  
  
# stage of command execution where the thread is blocked and can not serve  
  
# other requests in the meantime).  
  
#   
  
# You can configure the slow log with two parameters: one tells Redis  
  
# what is the execution time, in microseconds, to exceed in order for the  
  
# command to get logged, and the other parameter is the length of the  
  
# slow log. When a new command is logged the oldest one is removed from the  
  
# queue of logged commands.  
  
   
  
# The following time is expressed in microseconds, so 1000000 is equivalent  
  
# to one second. Note that a negative number disables the slow log, while  
  
# a value of zero forces the logging of every command.  
  
slowlog-log-slower-than 10000  
  
   
  
# There is no limit to this length. Just be aware that it will consume memory.  
  
# You can reclaim memory used by the slow log with SLOWLOG RESET.  
  
slowlog-max-len 1024  
  
   
  
################################ VIRTUAL MEMORY ###############################  
  
   
  
### WARNING! Virtual Memory is deprecated in Redis 2.4  
  
### The use of Virtual Memory is strongly discouraged.  
  
   
  
### WARNING! Virtual Memory is deprecated in Redis 2.4  
  
### The use of Virtual Memory is strongly discouraged.  
  
   
  
# Virtual Memory allows Redis to work with datasets bigger than the actual  
  
# amount of RAM needed to hold the whole dataset in memory.  
  
# In order to do so very used keys are taken in memory while the other keys  
  
# are swapped into a swap file, similarly to what operating systems do  
  
# with memory pages.  
  
#  
  
# To enable VM just set 'vm-enabled' to yes, and set the following three  
  
# VM parameters accordingly to your needs.  
  
   
  
vm-enabled no  
  
指定是否啟用虛擬記憶體機制，預設值為no，簡單的介紹一下，VM機制將資料分頁存放，由Redis將訪問量較少的頁即冷資料swap到磁碟上，訪問多的頁面由磁碟自動換出到記憶體中（在後面的文章我會仔細分析Redis的VM機制）  
  
# vm-enabled yes  
  
   
  
# This is the path of the Redis swap file. As you can guess, swap files  
  
# can't be shared by different Redis instances, so make sure to use a swap  
  
# file for every redis process you are running. Redis will complain if the  
  
# swap file is already in use.  
  
#  
  
# The best kind of storage for the Redis swap file (that's accessed at random)   
  
# is a Solid State Disk (SSD).  
  
#  
  
# *** WARNING *** if you are using a shared hosting the default of putting  
  
# the swap file under /tmp is not secure. Create a dir with access granted  
  
# only to Redis user and configure Redis to create the swap file there.  
  
vm-swap-file /tmp/redis.swap  
  
虛擬記憶體檔案路徑，預設值為/tmp/redis.swap，不可多個Redis例項共享  
  
# vm-max-memory configures the VM to use at max the specified amount of  
  
# RAM. Everything that deos not fit will be swapped on disk *if* possible, that  
  
# is, if there is still enough contiguous space in the swap file.  
  
#  
  
# With vm-max-memory 0 the system will swap everything it can. Not a good  
  
# default, just specify the max amount of RAM you can in bytes, but it's  
  
# better to leave some margin. For instance specify an amount of RAM  
  
# that's more or less between 60 and 80% of your free RAM.  
  
vm-max-memory 0  
  
將所有大於vm-max-memory的資料存入虛擬記憶體,無論vm-max-memory設定多小,所有索引資料都是記憶體儲存的(Redis的索引資料 就是keys),也就是說,當vm-max-memory設定為0的時候,其實是所有value都存在於磁碟。預設值為0  
  
# Redis swap files is split into pages. An object can be saved using multiple  
  
# contiguous pages, but pages can't be shared between different objects.  
  
# So if your page is too big, small objects swapped out on disk will waste  
  
# a lot of space. If you page is too small, there is less space in the swap  
  
# file (assuming you configured the same number of total swap file pages).  
  
#  
  
# If you use a lot of small objects, use a page size of 64 or 32 bytes.  
  
# If you use a lot of big objects, use a bigger page size.  
  
# If unsure, use the default :)  
  
vm-page-size 32  
  
Redis swap檔案分成了很多的page，一個物件可以儲存在多個page上面，但一個page上不能被多個物件共享，vm-page-size是要根據儲存的 資料大小來設定的，作者建議如果儲存很多小物件，page大小最好設定為32或者64bytes；如果儲存很大大物件，則可以使用更大的page，如果不 確定，就使用預設值  
  
# Number of total memory pages in the swap file.  
  
# Given that the page table (a bitmap of free/used pages) is taken in memory,  
  
# every 8 pages on disk will consume 1 byte of RAM.  
  
#  
  
# The total swap size is vm-page-size * vm-pages  
  
#  
  
# With the default of 32-bytes memory pages and 134217728 pages Redis will  
  
# use a 4 GB swap file, that will use 16 MB of RAM for the page table.  
  
#  
  
# It's better to use the smallest acceptable value for your application,  
  
# but the default is large in order to work in most conditions.  
  
vm-pages 134217728  
  
設定swap檔案中的page數量，由於頁表（一種表示頁面空閒或使用的bitmap）是在放在記憶體中的，，在磁碟上每8個pages將消耗1byte的記憶體。  
  
# Max number of VM I/O threads running at the same time.  
  
# This threads are used to read/write data from/to swap file, since they  
  
# also encode and decode objects from disk to memory or the reverse, a bigger  
  
# number of threads can help with big objects even if they can't help with  
  
# I/O itself as the physical device may not be able to couple with many  
  
# reads/writes operations at the same time.  
  
#  
  
# The special value of 0 turn off threaded I/O and enables the blocking  
  
# Virtual Memory implementation.  
  
vm-max-threads 4  
  
設定訪問swap檔案的執行緒數,最好不要超過機器的核數,如果設定為0,那麼所有對swap檔案的操作都是序列的，可能會造成比較長時間的延遲。預設值為4  
  
############################### ADVANCED CONFIG ###############################  
  
   
  
# Hashes are encoded in a special way (much more memory efficient) when they  
  
# have at max a given numer of elements, and the biggest element does not  
  
# exceed a given threshold. You can configure this limits with the following  
  
# configuration directives.  
  
hash-max-zipmap-entries 512  
  
hash-max-zipmap-value 64  
  
指定在超過一定的數量或者最大的元素超過某一臨界值時，採用一種特殊的雜湊演算法  
  
# Similarly to hashes, small lists are also encoded in a special way in order  
  
# to save a lot of space. The special representation is only used when  
  
# you are under the following limits:  
  
list-max-ziplist-entries 512  
  
list-max-ziplist-value 64  
  
   
  
# Sets have a special encoding in just one case: when a set is composed  
  
# of just strings that happens to be integers in radix 10 in the range  
  
# of 64 bit signed integers.  
  
# The following configuration setting sets the limit in the size of the  
  
# set in order to use this special memory saving encoding.  
  
set-max-intset-entries 512  
  
   
  
# Similarly to hashes and lists, sorted sets are also specially encoded in  
  
# order to save a lot of space. This encoding is only used when the length and  
  
# elements of a sorted set are below the following limits:  
  
zset-max-ziplist-entries 128  
  
zset-max-ziplist-value 64  
  
   
  
# Active rehashing uses 1 millisecond every 100 milliseconds of CPU time in  
  
# order to help rehashing the main Redis hash table (the one mapping top-level  
  
# keys to values). The hash table implementation redis uses (see dict.c)  
  
# performs a lazy rehashing: the more operation you run into an hash table  
  
# that is rhashing, the more rehashing "steps" are performed, so if the  
  
# server is idle the rehashing is never complete and some more memory is used  
  
# by the hash table.  
  
#   
  
# The default is to use this millisecond 10 times every second in order to  
  
# active rehashing the main dictionaries, freeing memory when possible.  
  
#  
  
# If unsure:  
  
# use "activerehashing no" if you have hard latency requirements and it is  
  
# not a good thing in your environment that Redis can reply form time to time  
  
# to queries with 2 milliseconds delay.  
  
#  
  
# use "activerehashing yes" if you don't have such hard requirements but  
  
# want to free memory asap when possible.  
  
activerehashing yes  
  
   
  
################################## INCLUDES ###################################  
  
   
  
# Include one or more other config files here.  This is useful if you  
  
# have a standard template that goes to all redis server but also need  
  
# to customize a few per-server settings.  Include files can include  
  
# other files, so use this wisely.  
  
#  
  
# include /path/to/local.conf  
  
# include /path/to/other.conf