1. 程式人生 > >老外總結的中國人寫英語文章最常犯的錯誤總結

老外總結的中國人寫英語文章最常犯的錯誤總結

原文來自小木蟲論壇。

The Most Common Habits

from more than 200 English Papers

written by Graduate Chinese

Engineering Students

By Felicia Brittman

This paper presents some of the most common Chinese-English habits observed from over two hundred English technical papers by Chinese writers. The habits are explained and in most cases, example text from an actual paper is given along with preferred text. An attempt is made to explain how to correct and prevent such mistakes.In some cases a possible explanation of why the habit occurs is also given. This paper can serve as an individual guide to editing technical papers especially when a native English-speaking editor is unavailable.

Introduction

Most Chinese universities require their doctoral and master candidates in technical and scientific fields to publish at least one English paper in an international journal as a degree requirement. However, many factors make this task difficult to accomplish. First, previous English studies may not have focused enough on writing, let alone technical writing. Current studies may not include English, causing the writers English fluency level to decline. Second, most writers have never lived in an Englishspeaking country. Third, due to the special aspects of technical writing, even native English-speaking engineering students have a technical writing course as part of their study.

Too often, students’ papers are returned unaccepted because of poor English. If available, students may have their papers edited by a native English speaker. However, this can get expensive for a department that has many students with each paper typically needing to be edited twice. Hiring someone to edit papers is difficult, costly and only puts a patch over the problem. A native English speaker can do a good job at getting rid of most of the grammatical mistakes. However, if this person does not have a technical background, particularly in the area of the papers he is editing, he is unable to get rid of all of the mistakes and make sure that the meaning is clear. He cannot recognize the incorrect translation of technical terms for which there is a standard word. Such mistakes will not be picked up by the processor’s spelling and grammar checker. In addition, if they are not familiar with the topic or field, they may not grasp the meaning of the entire article and fail to make critical edits.

Hiring a person with a technical background similar to that of the papers being edited is a better option. Nevertheless, while a person with a technical background may be able to edit the paper sufficiently, he may not be able to explain to the writer how to prevent such mistakes in the future. Besides, it is difficult for most Chinese universities to hire such staff simply for editing. Universities may consider inviting a visiting scholar who will edit papers in addition to doing research or teaching as part of an exchange.

Although editing may be the fastest way to publish papers, it does little in the way of teaching the writers how to prevent common mistakes and colloquial habits that prevent a clear understanding of the writer’s ideas. Writers who have already obtained an impressing command of the English language can only truly benefit if they are made aware of their common mistakes and colloquial habits and how to prevent them.

Purpose

The purpose of this report is to introduce the most common habits in ChineseEnglish writing as noted from the over two hundred papers I have edited. The habits include grammar mistakes, colloquialisms, and formatting problems and in most cases prevent a clear understanding of the writer’s ideas. A few of the habits, such as writing extremely long sentences, can be corrected with careful use of the MS Word®grammar and style checker. However, most habits, such as missing articles, go unnoticed by automatic grammar checking devices. Still, Chinese-English colloquial habits are not recognized by such software tools.

Structure

The common habits are presented in two sections. The first section lists the habits that, in my opinion, need the most attention. These habits interrupt the flow of the paper making it difficult to understand and occur most frequently. In this section, the habits are explained, example sentences from actual papers are given to show the habits, and the sentences are rewritten to show the correct way to write them. In the case of missing articles, a flow chart is also given to aid in choosing the correct articles.

In the second section, an additional list of habits is given. In some cases, example sentences are given. In other cases, advice is given. The second section is very useful in becoming familiar with small nuances.

Not all of the common habits I observed are presented mainly because they can only be dealt with on an individual basis. For example, writers had difficulty titling their papers and naming new technical ideas to express their contents and functions concisely. This problem frequently occurred but it can only be addressed individually. Once writers are aware of their habits, they would be able to write better technical English articles.

Section 1

“a, an, the”

The single most common habit is the omission of articles a, an, and the. This occurs because Mandarin has no direct equivalent of articles and the rules for using them are somewhat complicated for a non-native speakers.

Articles signal that a noun will follow and that any modifiers between the article and the noun refer to that noun (a big blue bicycle / the first award). A and an are indefinite articles; the is a definite article. Every time a singular noncount noun, a common noun that names one countable item, is used the noun requires some kind of determiner.

Mistake: The, a, and an are 1) omitted where they are required, 2) used where they are not needed or contribute to wordiness 3) used wrongly in place of the correct article.

Examples of incorrect usages:

Incorrect

Figure 2 shows the distribution of relative velocity on surface of main and splitter blades.15

Correct

Figure 2 shows the distribution of relative velocity on the surface of the main and splitter blades.15

Incorrect

The software PowerSHAPE is chosen to be a 3D modeling tool; it is good at dealing with free surfaces and curves.4

Correct

The software PowerSHAPE is chosen to be the 3D modeling tool; it is good at dealing with free surfaces and curves.4

There was only one 3D modeling tool used in this study, therefore ‘3D modeling tool’ is specific and requires the article the.

Incorrect

A theoretical method for calculating the inner flow-field in centrifugal impeller with splitter blades and investigation of the interactions between main and splitter blades is presented in this paper. The vortices are distributed on the main and splitter blades to simulate the effects of flows. Systematical study of number and distribution of vortices is conducted.15

Correct

A theoretical method for calculating the inner flow-field in a centrifugal impeller with splitter blades and an investigation of the interactions between main and splitter blades is presented in this paper. The vortices are distributed on the main and splitter blades to simulate the effects of flows. A systematical study of the number and distribution of vortices is conducted.15

Incorrect

Theoretically, remanufacturing could fully take advantage of resources contained in EOF product thereby minimizing impact on environment to the greatest extent compared to landfill or recycling of materials; consequently it contributes greatly to resource conservation.16

Correct

Theoretically, remanufacturing could fully take advantage of resources contained in an EOF product thereby minimizing the impact on the environment to the greatest extent compared to landfill or recycling of materials; consequently it contributes greatly to resource conservation.16

Definitions:

Articles

Also called determiners or noun markers, articles are the words a, an, and the. A and an are indefinite articles, and the is a definite article. Articles signal that a noun will follow and that any modifiers between the article and the noun refer to that noun. ( a cold , metal chair/ the lightning-fast computer).

Determiners

A word or word group, traditionally identified as an adjective, that limits a noun by telling how much or how many about it. (expression of quantity, limiting adjective, marker) They tell whether a noun is general (a tree) or specific (the tree). The is a definite article. Before a noun, the conveys that the known refers to a specific item (the plan). A and an are indefinite articles. They convey that a noun refers to an item in a nonspecific or general way (a plan).

Common nouns

A noun that names a general group, place, person, or thing: dog, house.

Count noun

A noun that names an item or items that can be counted: radio, streets, idea, fingernails.

Noncount nouns

A noun that names a thing that cannot be counted: water, time.

Specific noun

A noun understood to be exactly and specifically referred to; uses the definite article the.

Nonspecific noun

A noun that refers to any of a number of identical items; it takes the indefinite articles a , an.

Very long sentences

Very long sentences are especially common in Chinese-English writing because the writers often translate directly from Chinese to English. Although, in Chinese writing it is acceptable to put several supporting ideas in on sentence to show their relationship, in English, the main idea and each supporting idea is typically written in separate sentences.

One can usually recognize a very long sentence by its length – sixty words or more. However, sentences of smaller lengths can also be too long if they contain multiple statements that confuse the main idea. Long sentences can be avoided by limiting each sentence to one or two topics. Semicolons should be used where the writer really wants to emphasize the relationship between ideas.

Too long

According to the characteristic of fan-coil air-conditioning systems, this paper derives the cooling formula of fan-coil units based on the heat transfer theories and puts forward a new method to gauge cooling named Cooling Metering on the Airside, which can monitor the individual air-conditioning cooling consumption during a period of time by detecting the parameters of inlet air condition – temperature and humidity – of the fan-coil air-conditioning system as well as the parameters of inlet cooling water provided by the chiller.

Correct

This paper derives the cooling formula of fan-coil units based on the characteristics of fan-coil air-conditioning systems and heat transfer theories, and puts forward a new method to gauge cooling called Cooling Metering on the Air-side. The new method can monitor individual air-conditioning cooling consumption during a period of time by detecting the condition of inlet air – temperature and humidity – of the fan-coil air-conditioning system as well as the parameters of the inlet cooling water provided by the chiller.

Too long

The gear transmission is grade seven, the gear gap is 0.00012 radians, the gear gap has different output values corresponding to any given input value, nonlinearity of the gear gap model can be described by using the phase function method, the existing backlash block in the non-linear library of the Matlab/zdimulink toolbox can be used, the initial value of gear gap in the backlash block is set to zero.9

Correct

The gear transmission is grade seven. The gear gap, which is 0.00012 radians, has different output values corresponding to any given input value. The nonlinearity of the gear gap model can be described by using the phase function method. The existing backlash block in the non-linear library of the Matlab/zdimulink toolbox can be used; the initial value of gear gap in the backlash block is set to zero.

Another type of super-long sentence that frequently occurs in technical papers is that of a list. The writer wants to give a large amount of data, usually parameter values, and puts this information into one long, paragraph-sized sentence. However, the best way to give such type and quantity of information is to tabulate it (put it in a bulleted list).

Too long

…where m is the mass of the heavy disk mounted at the mid-span of a massless elastic shaft, e is the eccentricity of the mass center from the geometric center of the disk, φ is the angle between the orientation of the eccentricity and the ξ axis, kξand kηare the stiffness coefficients in two principal directions of shaft respectively, c is the viscous damping coefficient of the shaft and the disk, ciis the inner damping coefficient of shaft, ω is the rotating speed, ξsand ηs are the components of initial bend in directions of ξ ,η axes respectively: ξs =rb cosθ, ηs =rsinθ .1

Correct

Where m is the mass of the heavy disk mounted at the mid-span of a massless elasticshaft, e is the eccentricity of the mass center from the geometric center of the disk, φ is the angle between the orientation of the eccentricity and the ξ axis, kξand kηare the stiffness coefficients in the two principal directions of the shaft, c is the viscous damping coefficient of the shaft and the disk, ciis the inner damping coefficient of the shaft, ω is the rotating speed, ξsand ηs are the components of initial bend in directions of ξ ,η axes, respectively: ξs =rb cosθ, ηs =rsinθ .

Too long

The clear height of the case is 6.15 meters; the thickness of the roof is 0.85 meters; the thickness of the bottom is 0.90 meters, the overall width is 26.6 meters, the overall length of the axial cord is 304.5 meters, the length of the jacking section is about 148.8 meters; the weight of the case is about 24127 tons.3

Clear

• Case clearance height 6.15 meters

• Roof thickness 0.85 meters

• Bottom thickness 0.90 meters

• Overall width 26.6 meters

• Overall length of the axial cord 304.5 meters

• Length of the jacking section 148.8 meters (approx.)

• Weight of the case 24127 tons (approx.)

Prefacing the main idea of a sentence by stating the purpose,location or reason first

Chinese writers often preface the main topic of a sentence by first stating the purpose, location, reason, examples and conditions as introductory elements. However, this has the effect of demoting the importance of the main idea and making the reader think the author is indirect. Bring the main idea to the beginning of the sentence stating any locations, reasons, etc., afterwards.

Incorrect

For the application in automobile interiors, this paper studies the nesting optimization problem in leather manufacturing. 5

Correct

This paper studies the nesting optimization problem in leather manufacturing for application in automobile interiors.

Incorrect

Especially when numerical control (NC) techniques[4] are widely used in industry and rapid prototype methods[5][6] bring a huge economical benefits, the advantage of constructing 3D model[7][8][9] becomes extremely obvious.2

Correct

The advantage of constructing a 3D model[7][8][9] becomes extremely obvious especially when numerical control (NC) techniques[4] are widely used in industry and rapid prototype methods[5][6] bring a huge economical benefits.

Incorrect

Inside the test box, the space was filled with asbestos.15

Correct

The space inside the test box was filled with asbestos.

Incorrect

In practice, we employed this approach to dispose of a wheelhouse subassembly of one kind of auto-body, and the results show that this method is feasible.16

Correct

We employed this approach to dispose of a wheelhouse subassembly of one kind of auto-body, and the results show that this method is feasible.

Incorrect

To ensure sheet metal quality as well as assembly quality, CMMs are widely used in automotive industry production.16

Correct

CMMs are widely used in automotive industry production to ensure sheet metal quality as well as assembly quality.

Tendency of placing phrases which indicate time at the beginning of a sentence

Incorrect

When U is taken as the control parameter, the BDs for ∆=0.0, 0.001, 0.005 are shown in Fig. 8.

Correct

Figure 8 shows the BDs for ∆=0.0, 0.001, and 0.005 when U is taken as the control parameter.

Place the most important subject at the beginning of the sentence for emphasis

Incorrect

Based on the triangulation structure built from unorganized points or a CAD model, the extended STL format is described in this section.4

Correct

The extended STL format is described in this section based on the triangulation structure built from unorganized points or a CAD model.

Incorrect

The 3D dentition defect and restoration element models are designed precisely with complicated surfaces.4

Correct

The 3D dentition defect and restoration element models with complicated surfaces are designed precisely.

“which/ that”

The antecedent (noun or pronoun) to which which refers is not specific, causing confusion.

Antecedent

The noun or pronoun to which a pronoun refers.

TheShijiazhuang south road underground bridge possesses the largest jacking force, which is built at 1978(10680t).’ [‘Shijiazhuang south road underground bridge possesses the largest jacking force which is built at 1978(10680t).’

Absolute truths in paleontology are often elusive, and even the filmmakers were surprised at the fierce arguments that split the scientists when an initial brainstorming session was else.

‘Respectively’ and ‘respective’

Respectively refers back to two or more persons or things only in the order they were previously designated or mentioned. If two lists are given, respectively pairs the list entries according to the order in which they are given. In this case the use of respectively is to allow the writer to give a lot of information without confusing the reader or writing several short sentences. Respectively is usually at the end of the sentence. In both cases, mentioning the order must be important to the meaning of the sentence otherwise it is not used.

For example: Bobby, Nicole and Daren wore red, green and blue coats, respectively.

Respective to two or more persons or things only in the order they were previously designated or mentioned.

The uses of these two words are usually incorrect or confusing as in the following examples.

1. Respectively is misplaced in the sentence; it is put before the nouns to which it refers.

Incorrect

Equations 2~6 can be respectivelylinearized as:……(equations given)…13

Correct

Equations 2~6 can be linearized as:……(equations given)…, respectively.

Incorrect

The weights of the two experts are respectively0.600 and 0.400.19

Correct

The weights of the two experts are 0.600 and 0.400, respectively.

2. Respectively is inserted to express that there is a certain order in which something was done. However, the order is already implied elsewhere in the sentence or does not need to be expressed because it does not add value to meaning of the sentence.

Incorrect

Ifboth thecore technology score and core quality score of a bottleneck processare, respectively, below certain scores, then we refer to strategy 1, otherwise, if eitheris, respectively, above acertain score, then we refer to strategy 2. Similarly, if thecore technology and core quality are, respectively, above acertain score, then we refer to strategy 3, otherwise, if either is, respectively, below acertain score, then we refer to strategy 4.19

Correct

Ifboth thecore technology score and core quality score ofa bottleneck processare below certain scores, then we refer to strategy 1, otherwise, if either isabove acertain score, then we refer to strategy 2. Similarly, if thecore technology and core quality are above acertainscore, then we refer to strategy 3, otherwise, if either isbelow acertain score, then we refer to strategy 4.

Incorrect

Then, the rows of vortex due to both of the long and short blades are transformed into two singularities on the ζ -plane and integrate the induced velocity along the bladesrespectively.20

Correct

Then, the rows of vortex due to both of the long and short blades are transformed into two singularities on the ζ -plane and integrate the induced velocity along the blades.

3. In addition to 2, it is unclear to what ‘respectively’ refers.

Incorrect

The dynamic characteristics of a rotor with asymmetric stiffness or with initial warp have been studied before respectively [1-4]

Correct

The dynamic characteristics of a rotor with asymmetric stiffness or with initial warp have been studied before [1-4].

Incorrect

The inlet and outlet temperature of the air cooler were measured using two thermocouplesrespectively.17

Correct

The inlet and outlet temperature of the air cooler were measured by using two thermocouples.

‘In this paper’, ‘in this study’

Two errors occur when these phrases are used. The first is overuse. In some papers written by Chinese, these phrases can occur as much as twice per page. In papers written by native English writers these phrases are reserved for primarily two uses

1. In the introduction and conclusion to mphasize the content of the paper.

2. In the body of the paper, after referring to work not done by the author such as in other journal articles or in standard.

Therefore, if either phrase occurs more than three times in a paper, its use is questionable. Actually, the reader is aware that the work presented is by the author (unless the author states otherwise) so there is no reason to repeat these phrases.

The second error is more subtle. The two phrases are interchanged.

Awkward

In this paper, IDEAS was used to ….

Correct

In this study, IDEAS was used to….

Awkward

In the paper, a SZG4031 towing tractor is used as the sample vehicle, it components equivalent physical parameters are obtained by UG design and testing.9

Correct

In this study, a SZG4031 towing tractor is used as the sample vehicle, it components equivalent physical parameters are obtained by UG design and testing.

The ‘study’ is the work the author/s did. The paper is the mode to present this work and is what the reader is holding/ reading. Keep in mind the writer can also use other phrases such as ‘in this research’, and ‘this paper present’.

Numbers and Equations

Two very common errors are those concerning the presentation of Arabic numerals, and equations. Chinese writers usually write Arabic numerals instead of spelling out the word. The use of Arabic numerals, itself, is not an error however; they should never be used at the beginning of sentences.

Incorrect

12 parameters were selected for the experiment.

Correct

Twelve parameters were selected for the experiment.

In addition, Arabic numerals are overused. Arabic numerals should be used to give data in technical papers, however they should not be used to give general information.

Incorrect

All 3 studies concluded that the mean temperature should be 30°C.

Correct

All three studies concluded that the mean temperature should be 30°C.

This probably stems from the fact that Mandarin is a symbolic language and not alphabetic. Thus, the writer will find it easier to write a symbol that expresses the idea instead of the word. This problem is even more serious when equations are used in place of words in a way that is not practiced by native English speakers. Consider the following examples.

Equations should be introduced as much as possible, not inserted in place of words. Most journals, like the International Journal of Production Research, discourage the use of even short expressions within the text.

Incorrect

If the power battery SOC > SOClo and the driving torque belongs to the middle load,…

Correct

If the power battery SOC is greater than SOClo and the driving torque belongs to the middle load,…

Incorrect

All 3 studies concluded that the mean temperature should be 30°C.

Correct

All three studies concluded that the mean temperature should be 30°C.

Format

Paragraphs

A paragraph is a group of sentences that develop one topic or thought. Paragraphs are separated to indicate the end of one idea or thought and the beginning of another. All English paragraphs start on a new line with an indent of about one inch or with an extra line between the two paragraphs. The latter is more typical for business writing.

Chinese students are often puzzled by separating paragraphs; the may perform one of two error. One error occurs when the writer fails to distinguish between two paragraphs. Although the new paragraph starts on a new line, there is no indentation, therefore, the reader in is not aware of the change in paragraphs or ideas. The second error occurs when a paragraph is preceded by a single sentence on a single line. The single line is indented along with the succeeding paragraph as in example #. This commonly occurs in Chinese texts but is never done in English.

‘Figure’ and ‘Table’

The abbreviations for figure and table are Fig. and Tbl, respectively. However, the abbreviation of table is rarely seen in text. One can also write fig. for figure. However, one should choose one convention and use it throughout the paper. You should not switch between, Figure, figure, Fig, or fig. In addition, abbreviations are not used at the beginning of sentences and a space belongs between the word/ abbreviation and the number.

Incorrect

Figure.6, Figure6, Fig.6, Tbl10

Correct

Figure 6, Fig. 6, Tbl. 10

Variables Variables, especially those of the English alphabet, should be italicized in technical papers to distinguish them from English words. Of course, this depends on the style required by the journal.

Capitals Be careful that capitals are not in the middle of the sentence.

Incorrect

In table 1, The mark…

Correct

In table 1, the mark…

‘such as’ and ‘etc.’

Such as and etc. are commonly misused by Chinese-English writers. Such as means ‘for example’ and implies that an incomplete list will follow; etc. means ‘and so on’ and is used at the end of a list to show it is not complete. Therefore, using such as and etc. together is redundant.

Incorrect

相關推薦

老外總結中國人英語文章錯誤總結

原文來自小木蟲論壇。 The Most Common Habits from more than 200 English Papers written by Graduate Chinese Engineering Students By Felicia Bri

總結軟體開發過程中的10個問題

先總結一下Top10吧 Array轉ArrayList 判斷一個數組是否包含某個值 在迴圈內部刪除List中的一個元素 HashTable與HashMap 使用集合原始型別(raw type) 訪問級別 ArrayList和LinkedList 可變與不可變 父類和子類的構造方法 “”還是構造方法 這個

出你見到的5個runtime&nbs…

所謂系統異常,就是…..,它們都是RuntimeException的子類,在jdk doc中查RuntimeException類,就可以看到其所有的子類列表,也就是看到了所有的系統異常。我比較有印象的系統異常有:NullPointerException、ArrayIndexOutOfBoundsExc

Java程序員們的10個錯誤

table 程序 編譯期 con 引用 必須 排序 left 很多 Java程序員們最常犯的10個錯誤 1.將數組轉化為一個列表時,程序員們經常這樣做:   List<String> list = Arrays.asList(arr); Arrays.a

程序員的七個錯誤,開發年限越久的程序員反而越會這些錯

聽說 技術開發 都沒有 孤單 聯網 額外 borde 這樣的 tst 時間久了,我發現很多程序員總是犯著相同的錯誤,前仆後繼,卻毫不自知。 下面就是程序員在他們的軟件開發生涯中最常犯的7個錯誤。 ▼沒有明確的目標 心中沒有終點目標,那就只會隨波逐流。 如果你想在軟件開發

轉【研究生第一篇學術論文問題總結

摘要與結論幾乎重合 “他們論文中摘要部分與結論部分重複率超過70%。就原因而言,個人認為是他們對摘要和結論的“作用”沒有太多認識。”   對於摘要而言,首先要用一小句話引出為什麼做這個研究 然後,簡單地概述採用了那些研究方法 然後,直接了當地說出這篇論文的最重要結果,而不是所有的結果,最後

新手初學Python的十個錯誤,其中有你麼

Python學習交流群865597862!進群免費領取2018最全學習資料! 1. 忘記寫冒號 在 if、elif、else、for、while、class、def 語句後面忘記新增“:” if spam == 42 print('Hello!') 2. 誤用

AngularJS開發人員的10個錯誤

簡介 AngularJS是目前最為活躍的Javascript框架之一,AngularJS的目標之一是簡化開發過程,這使得AngularJS非常善於構建小型app原型,但AngularJS對於全功能的客戶端應用程式同樣強大,它結合了開發簡便,特性廣泛和出眾的效能,使其

研究生第一篇學術論文問題總結【喻海良箴言】

在過去幾個月裡面,我幫助不少研究生修改過學術論文。其中有一些人的論文的研究內容和結果非常好,但是,在他們論文撰寫過程中存在不少問題。現在回國了,我想應該是時候把這些問題總結一下,希望將來研究生們能夠

研究生第一篇學術論文問題總結

 在過去幾個月裡面,我幫助不少研究生修改過學術論文。其中有一些人的論文的研究內容和結果非常好,但是,在他們論文撰寫過程中存在不少問題。抽空把這些問題總結一下,希望將來研究生們能夠避免這些問題,提高科研論文寫作效率。摘要與結論幾乎重合這一條是我見過研究生論文中最常出現的事情,很

研究生第一篇學術論文問題總結[轉]

1. 摘要與結論幾乎重合 摘要:首先要用一小句話引出為什麼做這個研究,然後,簡單地概述採用了那些研究方法,然後,直接了當地說出這篇論文的最重要結果,而不是所有的結果,最後說說在這些工作之外重點討論了一個什麼現象就可以。 結論:正常情況下,應該直接明白地概述所

轉載[研究生第一篇學術論文問題總結]

歡迎使用Markdown編輯器 你好! 這是你第一次使用 Markdown編輯器 所展示的歡迎頁。如果你想學習如何使用Markdown編輯器, 可以仔細閱讀這篇文章,瞭解一下Markdown的基本語法知識。 新的改變 我們對Markdown編輯器進行了一些功能

驚呆了!Java程式設計師的錯竟然是這10個

和絕大多數的程式設計師一樣,我也非常的宅。週末最奢侈的享受就是逛一逛技術型網站,比如說 programcreek,這個小網站上有一些非常有意思的主題。比如說:Java 程式設計師最常犯的錯竟然是這 10 個,像這類令人好奇心想害死貓的主題,非常值得扒出來給大家分享一下。 PS:別問我“為什麼標題要加上

android錯誤記錄(三)

Multiple dex files define Landroid/support/xxx 這個包衝突都是support裡的,比如 Multiple dex files define Landroid/support/v4/app/FragmentTabHost$DummyTabFactory

JS中錯誤

01.==與=== 釋: 在JavaScript中使用三等號來判斷兩個條件是否相等。使用等於關係運算符時,只有兩邊的條件相等時,結果才為真,否則就是假。注意等於關係運算符並不只是判斷 數字型別的資料,也可以判斷字串型別以及布林型別的資料,所以在兩邊條件相等的情況下,兩者資料型別一樣,同時具體的資料也一

Python小白的10個錯誤,你還在這樣操作嗎?

下面是十個Python中很有用的貼士和技巧。其中一些是初學這門語言常常會犯的錯誤。 注意:假設我們都用的是Python 3 1.

讓我提高快的方法是抄寫英語文章

3.抄寫時不要看一詞抄一詞,而是要看完一句話後再來抄寫。長此以往,你對英語的表達方 式的瞭解一定會更上一層樓, 因為你在不知不覺中已經記下了不少的句子。 而再長的文章也 是由句子組成的,呵呵,也就是說你此時的閱讀水平已不可同日而語了。 

android OTG (USB讀,U盤讀)全使用相關總結

androidOTG (USB讀寫,U盤讀寫) 最全使用相關總結 簡介 第一種讀取方法:android推薦使用的通過endpoint的形式進行通訊 第二種讀取方法:像讀你sdcard的形式來讀你的U盤裝置 注意注意注意 簡介   首先關於現

Redis的被問到知識點總結

1.什麼是redis?    Redis 是一個基於記憶體的高效能key-value資料庫。  2.Reids的特點      Redis本質上是一個Key-Value型別的記憶體資料庫,很像memcached,整個資料庫統統載入在記憶體當中進行操作,定期通過非同步操作把資料庫資料flush到硬碟上

【搞定 Java 併發面試】面試問的 Java 併發基礎見面試題總結

本文為 SnailClimb 的原創,目前已經收錄自我開源的 JavaGuide 中(61.5 k Star!【Java學習+面試指南】 一份涵蓋大部分Java程式設計師所需要掌握的核心知識。歡迎 Star!)。 另外推薦一篇原創:終極推薦!可能是最適合你的Java學習路線+方法+網站+書籍推薦! Jav