1. 修改監聽器配置檔案

Linux下Oracle監聽器配置檔案在：$ ORACLE_HOME/network/admin/listerer.ora, 如：
 /bank/oracle/oracle10g/product/10.2.0/network/admin/listener.ora
 
修改並配置要監聽SID的相關資訊，如：

#listener.ora Network Configuration File: /bank/oracle/oracle10g/product/10.2.0/network/admin/listener.ora
# Generated by Oracle configuration tools.

SID_LIST_LISTENER =
  (SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = /bank/oracle/oracle10g/product/10.2.0)
      (PROGRAM = extproc)
    )

    (SID_DESC =
      (GLOBAL DBNAME = bkserver)
      (SID_NAME = bkserver)
    )

  )

LISTENER =
  (DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
      (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.19.213)(PORT = 1521))
    )
  )
 
2. 啟動監聽器

(1). 切換至oracle安裝使用者（一般為oracle）
su - oracle

(2). 啟動監聽器
lsnrctl start  

另：停止監聽器
lsnrctl stop

3. 測試監聽器是否執行正常

在客戶端修改tnsnames.ora配置檔案就訪問Oracle資料庫，如：

BKSERVER =
  (DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.19.213)(PORT = 1521))
    )
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = BKSERVER

M:\>tnsping bkserver

TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 12-8月 -
2010 17:11:04

Copyright (c) 1997, 2005, Oracle.  All rights reserved.

已使用的引數檔案:
D:\oracle\product\10.2.0\client_1\network\admin\sqlnet.ora

已使用 TNSNAMES 介面卡來解析別名
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
(HOST = 10.7.13.242)(PORT = 1521))) (CONNECT_DATA = (SERVER = DEDICATED) (SERVIC
E_NAME = BKSERVER)))
OK (20 毫秒)

注意： 監聽器是否能被tnsping通跟資料庫的開啟/關閉無關，所以就算可以tnsping通監聽器但未必能連線到資料庫，這時請檢查listener.ora檔案配置資訊是否正確，還有資料庫是否已經被開啟。

關閉服務端的防火牆。