第十二週專案2 摩托車繼承自行車和機動車
阿新 • • 發佈:2019-02-06
/* *Copyright(c)2014,煙臺大學計算機學院 *All rights reserved. *檔名稱:test.cpp *作者:曾曉 *完成日期:2015年 5月 26日 *版本號:v1.0 */ #include <iostream> #include<conio.h> #include <windows.h> using namespace std; enum vehicleStaus {rest, running}; //車輛狀態:泊車、行進 class vehicle //車輛類 { protected: int maxSpeed; //最大車速 int currentSpeed; //當前速度 int weight; //車重 vehicleStaus status; //rest-泊車狀態;running-行進狀態 public: vehicle(int maxS, int w); //建構函式,初始時,當前速度總為0且處在停車狀態 void start(); //由rest狀態到running, 初速為1 void stop(); //由running狀態到rest, 當前速度小於5時,才允許停車 void speed_up(); //加速,呼叫1次,速度加1 void slow_down(); //減速,呼叫1次,速度減1,速度為0時,停車 }; vehicle::vehicle(int maxS,int w):maxSpeed(maxS),weight(w),currentSpeed(0),status(rest){} void vehicle::start() { if(status==rest) { status=running; currentSpeed=1; } else cout<<"您的車輛已經在行駛狀態!"<<endl; } void vehicle::stop() { if(status==running) if(currentSpeed<5) { status=rest; currentSpeed=0; } else cout<<"您的車輛正在超速行駛!"<<endl; } void vehicle::speed_up() { if(status==running) if(currentSpeed<maxSpeed) { currentSpeed++; } else cout<<"您的車輛正在超速行駛!"<<endl; } void vehicle::slow_down() { if(status==running) if(currentSpeed>0) { currentSpeed--; } else cout<<"您的車輛未啟動!"<<endl; if(currentSpeed=0) status=rest; } class bicycle :virtual public vehicle//(1)自行車類的虛基類為車輛類 { protected: double height; //車高 public: bicycle(int maxS=10, int w=50, int h=0.7); //定義建構函式 }; bicycle::bicycle(int maxS,int w,int h):vehicle(maxS,w),height(h){} class motorcar : virtual public vehicle//(2)機動車類的虛基類也為車輛類 { protected: int seatNum; //座位數 int passengerNum; //乘客人數 public: motorcar(int maxS=150, int w=1500, int s=5, int p=1); //定義建構函式 void addPassenger(int p=1); //增加搭載的乘客,超員要拒載,有人下車時,p為負數。當然車上乘客至少有1個(司機)。只有車停穩後才能上下客。 }; motorcar::motorcar(int maxS,int w,int s,int p):vehicle(maxS,w),seatNum(s),passengerNum(p){} void motorcar::addPassenger(int p) { if(status==running) cout<<"注意安全,請等待停車後再下車!"<<endl; else passengerNum+=p; if(passengerNum>seatNum) cout<<"您的車輛處於超載狀態!"<<endl; else if(passengerNum<1) cout<<"司機請不要離座!"<<endl; } class motorcycle: public bicycle,public motorcar//(3)摩托車類的基類為自行車類和機動車類 { public: motorcycle(int maxS=90, int w=100, int s=3, int p=1, int h=0.7);//定義建構函式 void show(); //顯示摩托車的執行狀態 }; motorcycle::motorcycle(int maxS,int w,int s,int p,int h):vehicle(maxS,w),bicycle(maxS,w,h),motorcar(maxS,w,s,p){} void motorcycle::show() { if(status==running) cout<<"您的車輛處於執行狀態!"<<endl; else if(status==rest) cout<<"您的車輛處於停止狀態!"<<endl; cout<<"當前車速:"<<currentSpeed<<endl; cout<<"乘客人數:"<<passengerNum<<endl; cout<<"最大速度:"<<maxSpeed<<endl; cout<<"座位數:"<<seatNum<<endl; } int main( ) { motorcycle m; bool end=false; while (!end) { cout<<"請操作:1-啟動 2-加速 3-減速 4-有人上車 5-有人下車 6-停車 0-結束"<<endl; char keydown= _getch(); //_getch()返回鍵盤上讀取的字元 switch(keydown) { case '1': cout<<"選中的操作是1-啟動\t"; m.start(); break; case '2': cout<<"選中的操作是2-加速\t"; m.speed_up(); break; case '3': cout<<"選中的操作是3-減速\t"; m.slow_down(); break; case '4': cout<<"選中的操作是4-有人上車\t"; m.addPassenger(); break; case '5': cout<<"選中的操作是5-有人下車\t"; m.addPassenger(-1); break; case '6': cout<<"選中的操作是6-停車\t"; m.stop(); break; case '0': end=true; break; } m.show(); cout<<endl; Sleep(200); //要包含標頭檔案<windows.h> } return 0; }
執行結果:
本來還覺得說一看咋這麻煩 仔細看看倒是不難 很多變數需要理清思路 一開始11errors 4warnings 默默放下程式碼滾去吃飯了><