Zynq7020 有關於vivado2017.4燒寫qspi報錯的解決辦法
阿新 • • 發佈：2019-02-10
****** Xilinx Program Flash ****** Program Flash v2017.3 (64-bit) **** SW Build 2018833 on Wed Oct 4 19:58:22 MDT 2017 ** Copyright 1986-2017 Xilinx, Inc. All Rights Reserved. Connecting to hw_server @ TCP:127.0.0.1:3121 Connected to hw_server @ TCP:127.0.0.1:3121 Available targets and devices: Target 0 : jsn-JTAG-HS3-210299A17FB8 Device 0: jsn-JTAG-HS3-210299A17FB8-4ba00477-0 Retrieving Flash info... Initialization done, programming the memory BOOT_MODE REG = 0x00000001 WARNING: [Xicom 50-100] The current boot mode is QSPI. If flash programming fails, configure device for JTAG boot mode and try again. f probe 0 0 0 Performing Erase Operation... Erase Operation successful. INFO: [Xicom 50-44] Elapsed time = 0 sec. Performing Blank Check Operation... 0%...INFO: [Xicom 50-44] Elapsed time = 1 sec. Blank Check Operation unsuccessful. The part is not blank. ERROR: Flash Operation Failed
燒入qspi中報錯，這個在2018的版本已經是修復的了，但2017的版本存在這個問題，參考了xilinx官方論壇解決了這個問題，注意這個是為Windows的解決辦法。
