Linux網路監控工具netstat、sar
常用到的網路分析工具命令很多,比如:nestat、ss、ip、sar、netstat等。這裡我主要介紹下我使用最多的兩個:netstat和sar。
1.netstat
/本來是想著自己寫的,但是在網上發現了一片寫得炒雞好,很全很詳細的文章。我還要寫嗎!- -。直接拿過來用嘛。/
netstat命令很強大。用man一下netstat,可以看到,Netstat 命令用於顯示各種網路相關資訊,如網路連線,路由表,介面狀態 (Interface Statistics),masquerade 連線,多播成員 (Multicast Memberships) 等等。
常見引數
-a (all)顯示所有選項,預設不顯示LISTEN相關
-t (tcp)僅顯示tcp相關選項
-u (udp)僅顯示udp相關選項
-n 拒絕顯示別名,能顯示數字的全部轉化成數字。
-l 僅列出有在 Listen (監聽) 的服務狀態
-p 顯示建立相關連結的程式名
-r 顯示路由資訊,路由表
-e 顯示擴充套件資訊,例如uid等
-s 按各個協議進行統計
-c 每隔一個固定時間,執行該netstat命令。
提示:LISTEN和LISTENING的狀態只有用-a或者-l才能看到
使用例項:
- 列出所有埠 (包括監聽和未監聽的)
列出所有埠 netstat -a
netstat -a | more
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 localhost:30037 :
udp 0 0 :bootpc :*
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ACC ] STREAM LISTENING 6135 /tmp/.X11-unix/X0
unix 2 [ ACC ] STREAM LISTENING 5140 /var/run/acpid.socket
列出所有 tcp 埠 netstat -at
netstat -at
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 localhost:30037 *:* LISTEN
tcp 0 0 localhost:ipp *:* LISTEN
tcp 0 0 *:smtp *:* LISTEN
tcp6 0 0 localhost:ipp [::]:* LISTEN
列出所有 udp 埠 netstat -au
netstat -au
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
udp 0 0 *:bootpc *:*
udp 0 0 *:49119 *:*
udp 0 0 *:mdns *:*
- 列出所有處於監聽狀態的 Sockets
只顯示監聽埠 netstat -l
netstat -l
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 localhost:ipp *:* LISTEN
tcp6 0 0 localhost:ipp [::]:* LISTEN
udp 0 0 *:49119 *:*
只列出所有監聽 tcp 埠 netstat -lt
netstat -lt
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 localhost:30037 *:* LISTEN
tcp 0 0 *:smtp *:* LISTEN
tcp6 0 0 localhost:ipp [::]:* LISTEN
只列出所有監聽 udp 埠 netstat -lu
netstat -lu
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
udp 0 0 *:49119 *:*
udp 0 0 *:mdns *:*
只列出所有監聽 UNIX 埠 netstat -lx
netstat -lx
Active UNIX domain sockets (only servers)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ACC ] STREAM LISTENING 6294 private/maildrop
unix 2 [ ACC ] STREAM LISTENING 6203 public/cleanup
unix 2 [ ACC ] STREAM LISTENING 6302 private/ifmail
unix 2 [ ACC ] STREAM LISTENING 6306 private/bsmtp
- 顯示每個協議的統計資訊
顯示所有埠的統計資訊 netstat -s
netstat -s
Ip:
11150 total packets received
1 with invalid addresses
0 forwarded
0 incoming packets discarded
11149 incoming packets delivered
11635 requests sent out
Icmp:
0 ICMP messages received
0 input ICMP message failed.
Tcp:
582 active connections openings
2 failed connection attempts
25 connection resets received
Udp:
1183 packets received
4 packets to unknown port received.
.....
顯示 TCP 或 UDP 埠的統計資訊 netstat -st 或 -su
netstat -st
netstat -su
- 在 netstat 輸出中顯示 PID 和程序名稱 netstat -p
netstat -p 可以與其它開關一起使用,就可以新增 “PID/程序名稱” 到 netstat 輸出中,這樣 debugging 的時候可以很方便的發現特定埠執行的程式。
netstat -pt
Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 1 0 ramesh-laptop.loc:47212 192.168.185.75:www CLOSE_WAIT 2109/firefox
tcp 0 0 ramesh-laptop.loc:52750 lax:www ESTABLISHED 2109/firefox
- 在 netstat 輸出中不顯示主機,埠和使用者名稱 (host, port or user)
當你不想讓主機,埠和使用者名稱顯示,使用 netstat -n。將會使用數字代替那些名稱。
同樣可以加速輸出,因為不用進行比對查詢。
netstat -an
如果只是不想讓這三個名稱中的一個被顯示,使用以下命令
netsat -a –numeric-ports
netsat -a –numeric-hosts
netsat -a –numeric-users
- 持續輸出 netstat 資訊
netstat 將每隔一秒輸出網路資訊。
netstat -c
Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 ramesh-laptop.loc:36130 101-101-181-225.ama:www ESTABLISHED
tcp 1 1 ramesh-laptop.loc:52564 101.11.169.230:www CLOSING
tcp 0 0 ramesh-laptop.loc:43758 server-101-101-43-2:www ESTABLISHED
tcp 1 1 ramesh-laptop.loc:42367 101.101.34.101:www CLOSING
^C
- 顯示系統不支援的地址族 (Address Families)
netstat –verbose
在輸出的末尾,會有如下的資訊
netstat: no support for `AF IPX' on this system.
netstat: no support for `AF AX25' on this system.
netstat: no support for `AF X25' on this system.
netstat: no support for `AF NETROM' on this system.
- 顯示核心路由資訊 netstat -r
netstat -r
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
192.168.1.0 * 255.255.255.0 U 0 0 0 eth2
link-local * 255.255.0.0 U 0 0 0 eth2
default 192.168.1.1 0.0.0.0 UG 0 0 0 eth2
注意: 使用 netstat -rn 顯示數字格式,不查詢主機名稱。
- 找出程式執行的埠
並不是所有的程序都能找到,沒有許可權的會不顯示,使用 root 許可權檢視所有的資訊。
netstat -ap | grep ssh
tcp 1 0 dev-db:ssh 101.174.100.22:39213 CLOSE_WAIT -
tcp 1 0 dev-db:ssh 101.174.100.22:57643 CLOSE_WAIT -
找出執行在指定埠的程序
netstat -an | grep ‘:80’
- 顯示網路介面列表
netstat -i
Kernel Interface table
Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg
eth0 1500 0 0 0 0 0 0 0 0 0 BMU
eth2 1500 0 26196 0 0 0 26883 6 0 0 BMRU
lo 16436 0 4 0 0 0 4 0 0 0 LRU
顯示詳細資訊,像是 ifconfig 使用 netstat -ie:
netstat -ie
Kernel Interface table
eth0 Link encap:Ethernet HWaddr 00:10:40:11:11:11
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Memory:f6ae0000-f6b00000
- IP和TCP分析
檢視連線某服務埠最多的的IP地址
wss8848@ubuntu:~$ netstat -nat | grep "192.168.1.15:22" |awk '{print $5}'|awk -F: '{print $1}'|sort|uniq -c|sort -nr|head -20
18 221.136.168.36
3 154.74.45.242
2 78.173.31.236
2 62.183.207.98
2 192.168.1.14
2 182.48.111.215
2 124.193.219.34
2 119.145.41.2
2 114.255.41.30
1 75.102.11.99
TCP各種狀態列表
wss8848@ubuntu:~$ netstat -nat |awk '{print $6}'
established)
Foreign
LISTEN
TIME_WAIT
ESTABLISHED
TIME_WAIT
SYN_SENT
先把狀態全都取出來,然後使用uniq -c統計,之後再進行排序。
wss8848@ubuntu:~$ netstat -nat |awk '{print $6}'|sort|uniq -c
143 ESTABLISHED
1 FIN_WAIT1
1 Foreign
1 LAST_ACK
36 LISTEN
6 SYN_SENT
113 TIME_WAIT
1 established)
最後的命令如下:
netstat -nat |awk '{print $6}'|sort|uniq -c|sort -rn
分析access.log獲得訪問前10位的ip地址
awk '{print $1}' access.log |sort|uniq -c|sort -nr|head -10
2.sar
用yum安裝sar
yum install sysstat
命令介紹
sar --help
Usage: sar [ options ] [ <interval> [ <count> ] ]
Options are:
[ -A ] [ -b ] [ -B ] [ -C ] [ -d ] [ -h ] [ -m ] [ -p ] [ -q ] [ -r ] [ -R ]
[ -S ] [ -t ] [ -u [ ALL ] ] [ -v ] [ -V ] [ -w ] [ -W ] [ -y ]
[ -I { <int> [,...] | SUM | ALL | XALL } ] [ -P { <cpu> [,...] | ALL } ]
[ -j { ID | LABEL | PATH | UUID | ... } ] [ -n { <keyword> [,...] | ALL } ]
[ -o [ <filename> ] | -f [ <filename> ] ] [ --legacy ]
[ -i <interval> ] [ -s [ <hh:mm:ss> ] ] [ -e [ <hh:mm:ss> ] ]
sar工具其實功能很強大,可以監控系統包括cpu、記憶體交換、io等。這裡僅僅介紹sar的網絡卡流量分析功能。
命令引數
sar -n { DEV | EDEV | NFS | NFSD | SOCK | ALL }
-n 選項提供了6個keyword,DEV顯示網路介面資訊,EDEV顯示關於網路錯誤的統計資料,NFS統計活動的NFS客戶端的資訊,NFSD統計NFS伺服器的資訊,SOCK顯示套接字資訊,ALL顯示所有5個開關。
命令例項:
sar -n DEV 2 5
sar -n DEV 2 5
Linux 2.6.32-573.el6.x86_64 (localhost.localdomain) 08/29/2016 _x86_64_ (4 CPU)
10:24:08 AM IFACE rxpck/s txpck/s rxkB/s txkB/s rxcmp/s txcmp/s rxmcst/s
10:24:10 AM lo 109.55 109.55 81.09 81.09 0.00 0.00 0.00
10:24:10 AM eth0 112.06 113.07 30.39 50.48 0.00 0.00 0.00
10:24:10 AM IFACE rxpck/s txpck/s rxkB/s txkB/s rxcmp/s txcmp/s rxmcst/s
10:24:12 AM lo 117.09 117.09 59.64 59.64 0.00 0.00 0.00
10:24:12 AM eth0 106.53 114.57 31.69 36.24 0.00 0.00 0.00
10:24:12 AM IFACE rxpck/s txpck/s rxkB/s txkB/s rxcmp/s txcmp/s rxmcst/s
10:24:14 AM lo 109.00 109.00 79.03 79.03 0.00 0.00 0.00
10:24:14 AM eth0 132.00 123.50 34.79 50.68 0.00 0.00 0.00
10:24:14 AM IFACE rxpck/s txpck/s rxkB/s txkB/s rxcmp/s txcmp/s rxmcst/s
10:24:16 AM lo 112.63 112.63 75.90 75.90 0.00 0.00 0.00
10:24:16 AM eth0 124.24 121.21 30.92 48.06 0.00 0.00 0.00
10:24:16 AM IFACE rxpck/s txpck/s rxkB/s txkB/s rxcmp/s txcmp/s rxmcst/s
10:24:18 AM lo 132.83 132.83 84.30 84.30 0.00 0.00 0.00
10:24:18 AM eth0 144.44 147.47 39.83 50.73 0.00 0.00 0.00
Average: IFACE rxpck/s txpck/s rxkB/s txkB/s rxcmp/s txcmp/s rxmcst/s
Average: lo 116.20 116.20 75.99 75.99 0.00 0.00 0.00
Average: eth0 123.84 123.94 33.52 47.24 0.00 0.00 0.00
IFACE:LAN介面
rxpck/s:每秒鐘接收的資料包
txpck/s:每秒鐘傳送的資料包
rxbyt/s:每秒鐘接收的位元組數
txbyt/s:每秒鐘傳送的位元組數
rxcmp/s:每秒鐘接收的壓縮資料包
txcmp/s:每秒鐘傳送的壓縮資料包
rxmcst/s:每秒鐘接收的多播資料包
sar -n EDEV 2 10
Linux 2.6.32-573.el6.x86_64 (localhost.localdomain) 08/29/2016 _x86_64_ (4 CPU)
10:25:24 AM IFACE rxerr/s txerr/s coll/s rxdrop/s txdrop/s txcarr/s rxfram/s rxfifo/s txfifo/s
10:25:26 AM lo 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
10:25:26 AM eth0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
10:25:26 AM IFACE rxerr/s txerr/s coll/s rxdrop/s txdrop/s txcarr/s rxfram/s rxfifo/s txfifo/s
10:25:28 AM lo 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
10:25:28 AM eth0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
10:25:28 AM IFACE rxerr/s txerr/s coll/s rxdrop/s txdrop/s txcarr/s rxfram/s rxfifo/s txfifo/s
10:25:30 AM lo 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
10:25:30 AM eth0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
10:25:30 AM IFACE rxerr/s txerr/s coll/s rxdrop/s txdrop/s txcarr/s rxfram/s rxfifo/s txfifo/s
10:25:32 AM lo 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
10:25:32 AM eth0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
10:25:32 AM IFACE rxerr/s txerr/s coll/s rxdrop/s txdrop/s txcarr/s rxfram/s rxfifo/s txfifo/s
10:25:34 AM lo 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
10:25:34 AM eth0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
Average: IFACE rxerr/s txerr/s coll/s rxdrop/s txdrop/s txcarr/s rxfram/s rxfifo/s txfifo/s
Average: lo 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
Average: eth0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
IFACE:LAN介面
rxerr/s:每秒鐘接收的壞資料包
txerr/s:每秒鐘傳送的壞資料包
coll/s:每秒衝突數
rxdrop/s:因為緩衝充滿,每秒鐘丟棄的已接收資料包數
txdrop/s:因為緩衝充滿,每秒鐘丟棄的已傳送資料包數
txcarr/s:傳送資料包時,每秒載波錯誤數
rxfram/s:每秒接收資料包的幀對齊錯誤數
rxfifo/s:接收的資料包每秒FIFO過速的錯誤數
txfifo/s:傳送的資料包每秒FIFO過速的錯誤數
sar -n SOCK 2 10
Linux 2.6.32-573.el6.x86_64 (localhost.localdomain) 08/29/2016 _x86_64_ (4 CPU)
10:34:48 AM totsck tcpsck udpsck rawsck ip-frag tcp-tw
10:34:50 AM 338 153 17 0 0 1100
10:34:52 AM 339 154 17 0 0 1128
10:34:54 AM 337 150 18 0 0 1153
10:34:56 AM 338 151 17 0 0 1168
10:34:58 AM 339 152 17 0 0 1189
Average: 338 152 17 0 0 1148
totsck:使用的套接字總數量
tcpsck:使用的TCP套接字數量
udpsck:使用的UDP套接字數量
rawsck:使用的raw套接字數量
ip-frag:使用的IP段數量