1. 程式人生 > >用yum快速搭建LAMP平臺

用yum快速搭建LAMP平臺

xmlrpc 0.0.0.0 can ocs round ani 分享圖片 oba default

實驗環境:

[root@nmserver-7 html]# cat  /etc/redhat-release 
CentOS release 7.3.1611 (AltArch) 
[root@nmserver-7 html]# uname -a
Linux nmserver-7.test.com 3.10.0-514.el7.centos.plus.i686 #1 SMP Wed Jan 25 12:55:04 UTC 2017 i686 i686 i386 GNU/Linux

1、安裝apache

  1.1 安裝apache

[root@nmserver-7 ~]# yum install httpd httpd-devel

  1.2 啟動apache服務

[root@nmserver-7 ~]# systemctl start  httpd

  1.3 設置httpd服務開機啟動

[root@nmserver-7 ~]# systemctl enable  httpd
Created symlink from /etc/systemd/system/multi-user.target.wants/httpd.service to /usr/lib/systemd/system/httpd.service.

  1.4 查看服務狀態

技術分享圖片
[root@nmserver-7 ~]# systemctl status httpd
● httpd.service - The Apache HTTP Server
   Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled; vendor preset: disabled)
   Active: active (running) since 五 2017-07-21 17:21:37 CST; 6min ago
     Docs: man:httpd(8)
           man:apachectl(8)
 Main PID: 2449 (httpd)
   Status: "Total requests: 11; Current requests/sec: 0; Current traffic:   0 B/sec"
   CGroup: /system.slice/httpd.service
           ├─2449 /usr/sbin/httpd -DFOREGROUND
           ├─2450 /usr/sbin/httpd -DFOREGROUND
           ├─2451 /usr/sbin/httpd -DFOREGROUND
           ├─2452 /usr/sbin/httpd -DFOREGROUND
           ├─2453 /usr/sbin/httpd -DFOREGROUND
           ├─2454 /usr/sbin/httpd -DFOREGROUND
           ├─2493 /usr/sbin/httpd -DFOREGROUND
           ├─2494 /usr/sbin/httpd -DFOREGROUND
           └─2495 /usr/sbin/httpd -DFOREGROUND

7月 21 17:21:35 nmserver-7.test.com systemd[1]: Starting The Apache HTTP Server...
7月 21 17:21:36 nmserver-7.test.com httpd[2449]: AH00558: httpd: Could not reliably determine the server‘s fully q...ssage
7月 21 17:21:37 nmserver-7.test.com systemd[1]: Started The Apache HTTP Server.
Hint: Some lines were ellipsized, use -l to show in full.
技術分享圖片

  1.5 防火墻設置開啟80端口

[root@nmserver-7 ~]# firewall-cmd --permanent --zone=public  --add-service=http
success
[root@nmserver-7 ~]# firewall-cmd --permanent --zone=public  --add-service=https
success
[root@nmserver-7 ~]# firewall-cmd --reload
success

  1.6確認80端口監聽中

技術分享圖片
[root@nmserver-7 ~]# netstat -tulp
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name    
tcp        0      0 0.0.0.0:ssh             0.0.0.0:*               LISTEN      1084/sshd           
tcp        0      0 localhost:smtp          0.0.0.0:*               LISTEN      1486/master         
tcp6       0      0 [::]:ssh                [::]:*                  LISTEN      1084/sshd           
tcp6       0      0 localhost:smtp          [::]:*                  LISTEN      1486/master         
tcp6       0      0 [::]:http               [::]:*                  LISTEN      2449/httpd          
udp        0      0 localhost:323           0.0.0.0:*                           592/chronyd         
udp6       0      0 localhost:323           [::]:*                              592/chronyd   
技術分享圖片

  1.8 查服務器IP

技術分享圖片
[root@nmserver-7 ~]# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:0c:29:56:bc:cf brd ff:ff:ff:ff:ff:ff
    inet 192.168.8.9/24 brd 192.168.8.255 scope global ens33
       valid_lft forever preferred_lft forever
    inet6 fe80::20c:29ff:fe56:bccf/64 scope link 
       valid_lft forever preferred_lft forever
3: bridge0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN qlen 1000
    link/ether ea:89:d5:c7:32:73 brd ff:ff:ff:ff:ff:ff
技術分享圖片

  1.9 瀏覽器登陸

技術分享圖片

2、安裝mysql

  2.1安裝mysql

[root@nmserver-7 ~]# yum install mariadb mariadb-server mariadb-libs mariadb-devel

root@nmserver-7 ~]# rpm -qa |grep maria
mariadb-libs-5.5.52-1.el7.i686
mariadb-5.5.52-1.el7.i686
mariadb-server-5.5.52-1.el7.i686
mariadb-devel-5.5.52-1.el7.i686

  2.2 開啟mysql服務,並設置開機啟動,檢查mysql狀態

技術分享圖片
[root@nmserver-7 ~]# systemctl start  mariadb 
[root@nmserver-7 ~]# systemctl enable  mariadb 
Created symlink from /etc/systemd/system/multi-user.target.wants/mariadb.service to /usr/lib/systemd/system/mariadb.service.
[root@nmserver-7 ~]# systemctl status  mariadb 
● mariadb.service - MariaDB database server
   Loaded: loaded (/usr/lib/systemd/system/mariadb.service; enabled; vendor preset: disabled)
   Active: active (running) since 六 2017-07-22 21:19:20 CST; 21s ago
 Main PID: 9603 (mysqld_safe)
   CGroup: /system.slice/mariadb.service
           ├─9603 /bin/sh /usr/bin/mysqld_safe --basedir=/usr
           └─9760 /usr/libexec/mysqld --basedir=/usr --datadir=/v...

7月 22 21:19:15 nmserver-7.test.com mariadb-prepare-db-dir[9524]: ...
7月 22 21:19:15 nmserver-7.test.com mariadb-prepare-db-dir[9524]: ...
7月 22 21:19:15 nmserver-7.test.com mariadb-prepare-db-dir[9524]: ...
7月 22 21:19:15 nmserver-7.test.com mariadb-prepare-db-dir[9524]: ...
7月 22 21:19:15 nmserver-7.test.com mariadb-prepare-db-dir[9524]: ...
7月 22 21:19:15 nmserver-7.test.com mariadb-prepare-db-dir[9524]: ...
7月 22 21:19:15 nmserver-7.test.com mariadb-prepare-db-dir[9524]: ...
7月 22 21:19:16 nmserver-7.test.com mysqld_safe[9603]: 170722 21...
7月 22 21:19:16 nmserver-7.test.com mysqld_safe[9603]: 170722 21...
7月 22 21:19:20 nmserver-7.test.com systemd[1]: Started MariaDB ...
技術分享圖片

技術分享圖片
[root@nmserver-7 ~]# netstat -tulp
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name    
tcp        0      0 0.0.0.0:ssh             0.0.0.0:*               LISTEN      1084/sshd           
tcp        0      0 0.0.0.0:mysql           0.0.0.0:*               LISTEN      9760/mysqld         
tcp6       0      0 [::]:ssh                [::]:*                  LISTEN      1084/sshd           
tcp6       0      0 [::]:http               [::]:*                  LISTEN      2449/httpd          
udp        0      0 localhost:323           0.0.0.0:*                           592/chronyd         
udp6       0      0 localhost:323           [::]:*                              592/chronyd 
技術分享圖片

  2.3 數據庫安全設置

技術分享圖片
[root@nmserver-7 ~]# mysql_secure_installation 

NOTE: RUNNING ALL PARTS OF THIS SCRIPT IS RECOMMENDED FOR ALL MariaDB
      SERVERS IN PRODUCTION USE!  PLEASE READ EACH STEP CAREFULLY!

In order to log into MariaDB to secure it, we‘ll need the current
password for the root user.  If you‘ve just installed MariaDB, and
you haven‘t set the root password yet, the password will be blank,
so you should just press enter here.

Enter current password for root (enter for none): 
OK, successfully used password, moving on...

Setting the root password ensures that nobody can log into the MariaDB
root user without the proper authorisation.

Set root password? [Y/n] y
New password: 
Re-enter new password: 
Password updated successfully!
Reloading privilege tables..
 ... Success!


By default, a MariaDB installation has an anonymous user, allowing anyone
to log into MariaDB without having to have a user account created for
them.  This is intended only for testing, and to make the installation
go a bit smoother.  You should remove them before moving into a
production environment.

Remove anonymous users? [Y/n] y
 ... Success!

Normally, root should only be allowed to connect from ‘localhost‘.  This
ensures that someone cannot guess at the root password from the network.

Disallow root login remotely? [Y/n] n
 ... skipping.

By default, MariaDB comes with a database named ‘test‘ that anyone can
access.  This is also intended only for testing, and should be removed
before moving into a production environment.

Remove test database and access to it? [Y/n] y
 - Dropping test database...
 ... Success!
 - Removing privileges on test database...
 ... Success!

Reloading the privilege tables will ensure that all changes made so far
will take effect immediately.

Reload privilege tables now? [Y/n] y
 ... Success!

Cleaning up...

All done!  If you‘ve completed all of the above steps, your MariaDB
installation should now be secure.

Thanks for using MariaDB!
技術分享圖片

  2.4 登陸數據庫測試

技術分享圖片
[root@nmserver-7 ~]# mysql -uroot -p
Enter password: 
Welcome to the MariaDB monitor.  Commands end with ; or \g.
Your MariaDB connection id is 11
Server version: 5.5.52-MariaDB MariaDB Server

Copyright (c) 2000, 2016, Oracle, MariaDB Corporation Ab and others.

Type ‘help;‘ or ‘\h‘ for help. Type ‘\c‘ to clear the current input statement.

MariaDB [(none)]> show databases;
+--------------------+
| Database           |
+--------------------+
| information_schema |
| mysql              |
| performance_schema |
+--------------------+
3 rows in set (0.02 sec)

MariaDB [(none)]> 
技術分享圖片

3、安裝PHP

  3.1 安裝php

[root@nmserver-7 ~]# yum -y install php
[root@nmserver-7 ~]# rpm -ql php
/etc/httpd/conf.d/php.conf
/etc/httpd/conf.modules.d/10-php.conf
/usr/lib/httpd/modules/libphp5.so
/usr/share/httpd/icons/php.gif
/var/lib/php/session

  3.2 將php與mysql關聯起來

技術分享圖片
[root@nmserver-7 ~]# yum install php-mysql
[root@nmserver-7 ~]# rpm -ql php-mysql
/etc/php.d/mysql.ini
/etc/php.d/mysqli.ini
/etc/php.d/pdo_mysql.ini
/usr/lib/php/modules/mysql.so
/usr/lib/php/modules/mysqli.so
/usr/lib/php/modules/pdo_mysql.so
技術分享圖片

  3.3 安裝常用PHP模塊

[root@nmserver-7 ~]# yum install -y php-gd php-ldap php-odbc php-pear php-xml php-xmlrpc php-mbstring php-snmp php-soap curl curl-devel php-bcmath

  3.4 測試PHP

技術分享圖片
[root@nmserver-7 ~]# cd  /var/www/html/
[root@nmserver-7 html]# ls
[root@nmserver-7 html]# pwd
/var/www/html
[root@nmserver-7 html]# vi info.php

<?php
phpinfo();
?>
~
~
~
~
~
~
~
~ :wq
技術分享圖片

  3.5重啟apache服務器

[root@nmserver-7 html]# systemctl restart http

  3.6測試PHP

  在自己電腦瀏覽器輸入 192.168.8.9/info.php,你可以看到已經安裝的模塊;

技術分享圖片

  

用yum快速搭建LAMP平臺