linux中的strip命令簡介------給文件脫衣服
1、去掉-g,等於程序做了--strip-debug
2、strip程序,等於程序做了--strip-debug和--strip-symbol
作為一名Linux開發人員, 如果沒有聽說過strip命令, 那是很不應該的。 strip這個單詞, 大家應該早就學過了, 你就記住是脫衣服就行了, 別的不要多想。 在linux中, strip也有脫衣服的含義, 具體就是從特定文件中剝掉一些符號信息和調試信息。
我們來看main.c文件:
[cpp] view plain copy
- #include <stdio.h>
- int add(int x, int y)
- {
- return x + y;
- }
- int aaa;
- int bbb = 1;
- char szTest[] = "good";
- int main()
- {
- int ccc = 2;
- return 0;
- }
然後我們看看結果:
[plain] view plain copy
- [[email protected] learn_strip]$ ls
- main.c
- [[email protected] learn_strip]$ gcc main.c
- [[email protected] learn_strip]$ ls -l a.out
- -rwxrwxr-x 1 taoge taoge 4673 Jul 27 05:30 a.out
- [[email protected] learn_strip]$ file a.out
- a.out: ELF 32-bit LSB executable, Intel 80386, version 1 (GNU/Linux), dynamically linked (uses shared libs), for GNU/Linux 2.6.18, not stripped
- [[email protected] learn_strip]$ nm a.out
- 08049538 d _DYNAMIC
- 08049604 d _GLOBAL_OFFSET_TABLE_
- 0804847c R _IO_stdin_used
- w _Jv_RegisterClasses
- 08049528 d __CTOR_END__
- 08049524 d __CTOR_LIST__
- 08049530 D __DTOR_END__
- 0804952c d __DTOR_LIST__
- 08048520 r __FRAME_END__
- 08049534 d __JCR_END__
- 08049534 d __JCR_LIST__
- 08049628 A __bss_start
- 08049618 D __data_start
- 08048430 t __do_global_ctors_aux
- 08048310 t __do_global_dtors_aux
- 08048480 R __dso_handle
- w __gmon_start__
- 0804842a T __i686.get_pc_thunk.bx
- 08049524 d __init_array_end
- 08049524 d __init_array_start
- 080483c0 T __libc_csu_fini
- 080483d0 T __libc_csu_init
- U __libc_start_main@@GLIBC_2.0
- 08049628 A _edata
- 08049634 A _end
- 0804845c T _fini
- 08048478 R _fp_hw
- 08048274 T _init
- 080482e0 T _start
- 08049630 B aaa
- 08048394 T add
- 0804961c D bbb
- 08049628 b completed.5963
- 08049618 W data_start
- 0804962c b dtor_idx.5965
- 08048370 t frame_dummy
- 080483a2 T main
- 08049620 D szTest
- [[email protected] learn_strip]$
通過ls -l 命令可知, a.out的大小是4673個字節;
通過file命令可知, a.out是可執行文件, 且是not stripped, 也就是說沒有脫衣服。
通過nm命令, 可以讀出a.out中的符號信息。
現在, 我把a.out的衣服strip掉, 得到的結果為:
[plain] view plain copy
- [[email protected] learn_strip]$ ls
- a.out main.c
- [[email protected] learn_strip]$ strip a.out
- [[email protected] learn_strip]$ ls -l a.out
- -rwxrwxr-x 1 taoge taoge 2980 Jul 27 05:34 a.out
- [[email protected] learn_strip]$ file a.out
- a.out: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.18, stripped
- [[email protected] learn_strip]$ nm a.out
- nm: a.out: no symbols
- [[email protected] learn_strip]$
通過ls -l 命令可知, a.out的大小是2980個字節, 大大減小;
通過file命令可知, a.out是可執行文件, 且是stripped, 也就是說衣服被脫了;
通過nm命令, 發現a.out中的符號沒有了。
由此可見, strip用於脫掉文件的衣服, 文件會變小, 其中的符號信息會失去。 那這個strip有什麽用呢? 很有用的! 原來的a.out比較大, 可以執行。 在strip之後, 文件變小了, 仍然可以執行, 這就就節省了很多空間。
其實, strip不僅僅可以針對可執行文件, 還能針對目標文件和動態庫等。
在實際的開發中, 經常需要對動態庫.so進行strip操作, 減少占地空間。 而在調試的時候(比如用addr2line), 就需要符號了。 因此, 通常的做法是: strip前的庫用來調試, strip後的庫用來實際發布, 他們兩者有對應關系。 一旦發布的strip後的庫出了問題, 就可以找對應的未strip的庫來定位。
最後啰嗦一句, 某某動態庫strip前是18M左右, strip後是3M左右, 可見, 脫脫衣服還是有明顯好處的。
補充: 後來發現, 在調試過程中, 經常涉及到傳庫, 庫太大時, 很耗費傳輸時間, 所以還是用strip來搞一下吧。
linux中的strip命令簡介------給文件脫衣服