如何在linux下掛載NTFS格式的U盤或硬盤。
相信小夥伴們都有過這樣的煩惱，就是在linux服務器上傳文件過慢，而且還影響遠程操作這樣的問題當然可以通過，接入本地硬盤來解決，但是當你插入硬盤，mount 掛載的時候，就會出現報錯錯誤的大概內容就是無法掛載ntfs格式的分區，其實解決方法也很簡單：
[[email protected] ~]# fdisk -l
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda2 26 17417 139701240 83 Linux
/dev/sda3 17418 19457 16386300 82 Linux swap / Solaris
Disk /dev/sdb: 320.0 GB, 320072932864 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
/dev/sdb4 * 1 38914 312571192+ 7 HPFS/NTFS
然後掛載該分區/dev/sdb4 到/mnt目錄下,卻發現文件系統不能識別
[[email protected] ~]# mount /dev/sdb4 /mnt/
mount: unknown filesystem type ‘ntfs‘
此時需要安裝
rpm包已經上傳 需要的可以直接下載
fuse-ntfs-3g-2009.4.4-1.el5.rf.x86_64.rpm
warning: fuse-ntfs-3g-2009.4.4-1.el5.rf.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 6b8d79e6
Preparing... ########################################### [100%]
1:fuse-ntfs-3g ########################################### [100%]
安裝完成之後：再次通過mount.ntfs-3g /dev/sdb4 /mnt 即可掛載成功，對該分區進行操作
[[email protected] ~]# mount.ntfs-3g /dev/sdb4 /mnt/
The disk contains an unclean file system (0, 0).
The file system wasn‘t safely closed on Windows. Fixing.
[[email protected] ~]# mount
/dev/sda2 on / type ext3 (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
/dev/sda1 on /boot type ext3 (rw)
tmpfs on /dev/shm type tmpfs (rw)
none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)
/dev/sdb4 on /mnt type fuseblk (rw,allow_other,blksize=4096)
[[email protected] ~]# df -H
Filesystem Size Used Avail Use% Mounted on
/dev/sda2 139G 36G 97G 27% /
/dev/sda1 200M 13M 177M 7% /boot
tmpfs 3.1G 0 3.1G 0% /dev/shm
/dev/sdb4 321G 162G 159G 51% /mnt
成功掛載!!!
本文出自 “三極行者” 博客，請務必保留此出處http://namesam.blog.51cto.com/12364721/1943501
如何在linux下掛載NTFS格式的U盤或硬盤。