ubuntu16.04+matlab r2015b VideoReader報錯
讀取.mp4出錯
需要安裝gstreamer0.10-ffmpeg
`
sudo add-apt-repository ppa:mc3man/gstffmpeg-keep
sudo apt-get update
sudo apt-get install gstreamer0.10-ffmpeg
sudo apt-get install gstreamer0.10-tools
sudo apt-get install gstreamer0.10-plugins-good‘
ubuntu16.04+matlab r2015b VideoReader報錯
相關推薦
ubuntu16.04+matlab r2015b VideoReader報錯
sta -keep ubuntu16 安裝 IT In gstreamer ffmpeg 出錯 讀取.mp4出錯 需要安裝gstreamer0.10-ffmpeg ` sudo add-apt-repository ppa:mc3man/gstffmpeg-keep sud
ubuntu16.04 pip install scrapy 報錯處理
libs site libffi span ESS for -i ssl col Failed building wheel for Twisted inculde/site/python3.5/Twisted failed with error code 1 in tm
Ubuntu16.04編譯caffe+matlab2016b報錯集錦
Ubuntu16.04+caffe+matlab編譯報各種錯誤如下: 1 protobuf版本會報以下錯誤: 終極解決方案:安裝protobuf-2.6.0或protobuf-2.6.1,必須安裝此版本的protobuf!!! 重要的事情說三遍:
ubuntu16.04 CRF++安裝及報錯處理
安裝 1.下載CRF++-0.58.tar.gz 2.cd到壓縮包目錄,執行: (1) tar zxvf CRF++-0.58.tar.gz (2)cd CRF++-0.58 (3)./configure (4)make (5)su (6)ma
Xshell 連線ubuntu16.04下的OpenSSH報錯
putty連線沒有問題xshell報錯No matching outgoing encryption,沒有匹配的演算法 解決方法:Ciphers aes128-cbc,aes192-cbc,aes256
MATLAB讀視訊報錯 Unable to initialize the video obtain properties (videoreader in Matlab)
這個bug卡了半天,這裡記錄一下 Error using VideoReader/init (line 619) Could not read file due to an unexpected error. Reason: Unable to initialize the video obtain
ubuntu16.04 python2.7.12 報“ImportError: No module named site”錯
安裝完ubuntu16.04之後執行python出現此問題: Could not find platform independent libraries <prefix> Consider
ubuntu 16.04 LTS upgrade後報錯snapd
san cor rap ace ant uri configure sub -c 報錯:dpkg: error processing package ubuntu-core-launcher (--configure): dependency problems - leav
ubuntu 18.04下virtualbox啟動報錯
啟動VirtualBox的虛擬機器的時候出現瞭如圖所示的報錯 解決辦法: [email protected]:~$ sudo apt-get update [email protected]:~$ sudo apt-get install dkms [email
ubuntu18.04 qt5.11.1 報錯cannot find -lGL
[email protected]:/home$ locate libGL /opt/Qt5.11.1/Tools/QtCreator/lib/qtcreator/libGLSL.so /opt/Qt5.11.1/Tools/QtCreator/lib/qtcre
Ubuntu16 下 OpenCV 的一些報錯及操作
一、檢視當前Opencv版本 在終端輸入下面的命令,即可檢視opencv版本 pkg-config --modversion opencv 二、特徵提取器與描述子提取 宣告(opencv2.x 版本與 opencv3.x對比) 當需要呼叫opencv庫中的特徵提
Error using xlsread (matlab 讀取檔案報錯)
在使用matlab中的 xlsread 函式時,可能會報如下錯誤: Error using xlsread (line 251) Error in TSAF>pushbutton1_Call
Mac Mojave(10.14.1)執行Matlab的mex報錯
先裝了matlab2018b,發現很頻繁的crash,同時考慮到要跑的程式碼在>=2017a時就計算錯誤,於是轉戰matlab2016b matlab2016b安裝後,執行mex -setup報錯: >> mex -setup find: 37589: No such file or d
matlab 2015b 編譯報錯 No supported compiler or SDK was found 解決方案(20180410)
環境:Win 10, matlab 2015b, Visual Studio 2015 (這個方法適用於:MATLAB 2013b-2017a) matlab使用過程中,會經常需要編譯C/C++檔案來提升計算速度,因此需要安裝編譯器。否則會在編譯的時候出現下
Matlab的一些報錯及解決(不斷補充)
01 Error:At least one END is missing: the statement may begin here. 解決:結尾少了一個end,檢視下自己的程式碼中是不是有條件或者迴圈執行語句少了end 02 情景:做矩陣除法A\B(左除A矩陣,即坐側
Ubuntu12.04 安裝python-dev報錯 Depends: libblas-common
發現 wan 安裝python as3 lib apt 成功 tla ges 情況如下:$sudo apt-get install -y libatlas3-base libgfortran3 python-devReading package lists... DoneB
ubuntu16.04 執行命令: sudo apt-get -f install 報錯 E:Sub-process /usr/bin/dpkg returned an error code (1)
=================== 解決思路: //刪除掉 <嘗試覆蓋共享的'/usr/share/doc/libpng12-0/ANNOUNCE'> 解決思路: //刪除掉 
阿里雲Ubuntu16.04 修改bind配置後重啟動redis報錯
目的:需設定執行遠端連線redis 操作:修改配置檔案/etc/redis/redis.conf 的bind ,值改為阿里雲的公網ip重啟:修改後重啟redis報錯:重啟失敗報錯 Job for redis-server.service failed beca
VMware14.Pro Ubuntu16.04.04開機報錯:piix4_smbus 0000:00:007.3: Host SMBus controller not enabled
本文轉載自: https://www.linuxidc.com/Linux/2013-07/87365.htm 原因:ubuntu裝入i2c_piix4模組所致,因為系統找不到這個模組,所以報錯 解決: 1、查明裝入模組的確切名字,顯示輸出的結果是模組的確切名字:i2c_piix
ubuntu16.04下安裝anaconda3+caffe+cuda8.0+cudnnv5.1+matlab R2015b以及出現的錯誤
一、安裝順序 我是先安裝anaconda3(python3.6.6),然後安裝cuda9.0+cudnnv7,最後從官網下載caffe(linux版)進行caffe編譯的,最後安裝matlabR2015b ubuntu16.04截圖快捷鍵:對整個螢幕 Pr Scrn ,對