Linux雙網絡卡繫結指令碼

阿新 • • 發佈：2018-11-26

linux運維及配置工作中，常常會用到雙網絡卡繫結，少數幾臺伺服器的配置還好，如果是需要配置幾十甚至上百臺，難免會枯燥乏味，易於出錯，我編寫了這個雙網絡卡繫結的輔助指令碼，可傻瓜式地完成linux雙網絡卡繫結工作，當然，該指令碼主要還是用於小批量的系統配置，如需配置大量的伺服器，可提取指令碼中的bonding函式，稍作修改即可，你值得一試！

1.適用範圍

該shell指令碼可在以下linux系統建立多個繫結網絡卡，用於生產環境沒問題的：

Redhat 5.x
CentOS 5.x
Kylin 3.x
KUX 2.x

2.指令碼特點

----------------------------------------------
------  Network Configuration Assistant ------
----------------------------------------------

The information you have entered:

First NIC     :eth0
Second NIC    :eth1
bond name     :bond1
IP address    :192.168.56.11
netmask       :255.255.255.0
bonding_mode  :mode=1
primary NIC   :none
----------------------------------------------

Pls make sure its OK[y/n]:y

如上，指令碼在使用過程中，會依次提示輸入需要繫結的子網絡卡名稱、繫結網絡卡名稱、IP地址和子網掩碼、繫結模式、是否指定主網絡卡，並主動對系統中可用網絡卡進行識別並列出，供使用者選擇，同時會判斷輸入的各項資訊的正確性，保障雙網絡卡繫結順利進行。

3.使用說明

首先將指令碼上傳至linux系統任意目錄下，使用root使用者執行：

[[email protected] tmp]# sh bonding_v2.0.sh 

----------------------------------------------
------  Network Configuration Assistant ------
----------------------------------------------

4 network cards available:
eth0 eth1 eth2 eth3
----------------------------------------------

Please enter the First NIC:_

首先指令碼會列出系統中有多少可用網絡卡，並提示輸入需要繫結的第一塊子網絡卡的名稱，這裡輸入eth2。

無需擔心輸入錯誤，輸入重複等問題，指令碼會自動判斷你的輸入資訊是否正確。

----------------------------------------------
------  Network Configuration Assistant ------
----------------------------------------------

4 network cards available:
eth0 eth1 eth2 eth3

The information you have entered:
First NIC     : eth2
----------------------------------------------

Please select the second NIC:_

接著輸入需要繫結的第二塊網絡卡的名稱eth3，如果輸入錯誤會出現相應的提示，比如錯輸入為eth8，會提示需要重新輸入：

----------------------------------------------
------  Network Configuration Assistant ------
----------------------------------------------

4 network cards available:
eth0 eth1 eth2 eth3

The information you have entered:
First NIC     : eth2
----------------------------------------------

eth8 is not available,Please enter another one.

Please select the second NIC:_

正確輸入需要繫結的第二塊網絡卡eth3後，如果linux系統中之前不存在繫結網絡卡，則預設第一個繫結網絡卡的名稱為bond0，如果系統中存在繫結網絡卡，指令碼會提示輸入bondN(N為數字)：

----------------------------------------------
------  Network Configuration Assistant ------
----------------------------------------------

The information you have entered:
First NIC     : eth2
Second NIC    : eth3
bond name     : bond0
----------------------------------------------

The default first bond name is -- bond0.

Please enter an IP address:_

按照提示輸入需要繫結的IP地址，比如10.1.1.1

指令碼會自動判斷輸入的IP地址格式和範圍是否正確，無需擔心輸入錯誤

----------------------------------------------
------  Network Configuration Assistant ------
----------------------------------------------

The information you have entered:
First NIC     : eth2
Second NIC    : eth3
bond name     : bond0
IP address    : 10.1.1.1
----------------------------------------------

Pls enter the NETMASK[255.255.255.0]:_

輸入IP地址後，會提示輸入子網掩碼，預設為255.255.255.0，直接回車即可，也可以輸入自定義的子網掩碼。

----------------------------------------------
------  Network Configuration Assistant ------
----------------------------------------------

The information you have entered:
First NIC     : eth2
Second NIC    : eth3
bond name     : bond0
IP address    : 10.1.1.1
netmask       : 255.255.255.0
----------------------------------------------

Pls enter the bonding_mode[default:mode=1,active-backup]:_

這一步是輸入網絡卡繫結級別，預設使用主備模式：mode=1，直接回車即可，也可以輸入自定義的繫結級別（如輸入 mode=6），格式為：

mode=｛1,2,3,4,5,6｝

----------------------------------------------
------  Network Configuration Assistant ------
----------------------------------------------

The information you have entered:

First NIC     :eth2
Second NIC    :eth3
bond name     :bond0
IP address    :10.1.1.1
netmask       :255.255.255.0
bonding_mode  :mode=1
----------------------------------------------

1-eth2
2-eth3
3-none
choose whether to set up the primary NIC or not[default:3-none]:_

此時指令碼提示是否設定primary網絡卡，primary網絡卡的作用是在子網絡卡均正常時，primary網絡卡優先處於活動狀態，這裡預設為不設定primary網絡卡，也可以輸入數字1或2選擇一個網絡卡為primary網絡卡。

----------------------------------------------
------  Network Configuration Assistant ------
----------------------------------------------

The information you have entered:

First NIC     :eth2
Second NIC    :eth3
bond name     :bond0
IP address    :10.1.1.1
netmask       :255.255.255.0
bonding_mode  :mode=1
primary NIC   :none
----------------------------------------------

Pls make sure its OK[y/n]:_

至此，所有資訊輸入完畢，指令碼會讓您判斷輸入的所有資訊是否正確，正確則輸入y，進行下一步操作，否則輸入n，重新輸入以上資訊。

----------------------------------------------
------  Network Configuration Assistant ------
----------------------------------------------

Complete!
File backup directory: /etc/sysconfig/network-scripts/inspur_bak

you can check the file and then restart the network service.

1 ) service network restart
2 ) exit
----------------------------------------------
Please make your choice:_

看到這裡時，所有繫結網絡卡的配置檔案已經修改完畢了，輸入1重啟網路服務；輸入2直接退出指令碼。

建議選擇重啟網路服務，如果直接退出指令碼而不重啟網路服務，修改的配置檔案是不會生效的，並且在使用該指令碼建立下一個繫結網絡卡時顯示資訊會出現異常(因為指令碼通過ifconfig命令獲取當前網絡卡資訊)。

you can check the file and then restart the network service.

1 ) service network restart
2 ) exit
    ----------------------------------------------
Please make your choice:1
正在關閉介面 eth0：                                        [確定]
正在關閉介面 eth1：                                        [確定]
正在關閉介面 eth2：                                        [確定]
正在關閉介面 eth3：                                        [確定]
關閉環回介面：                                             [確定]
彈出環回介面：                                             [確定]
彈出介面 bond0： RTNETLINK answers: File exists
在 bond0 新增地址 10.1.1.1 時出錯。
                                                           [確定]
彈出介面 eth0：                                            [確定]
彈出介面 eth1：                                            [確定]

第一次重啟網路服務時可能會出現以上類似報錯，無需擔心，其實配置已經完成，再次重啟網路服務即恢復正常。

在繫結過程中修改的配置檔案如下：

[[email protected] tmp]# cd /etc/sysconfig/network-scripts/
[[email protected] network-scripts]# cat ifcfg-bond0 
DEVICE=bond0
BOOTPROTO=none
ONBOOT=yes
TYPE=Ethernet
USERCTL=no
IPV6INIT=no
PEERDNS=yes
IPADDR=10.1.1.1
NETMASK=255.255.255.0
BONDING_OPTS="miimon=100 mode=1"

[[email protected] network-scripts]# cat ifcfg-eth2 
DEVICE=eth2
BOOTPROTO=none
#HWADDR=08:00:27:41:b4:16
ONBOOT=yes
TYPE=Ethernet
USERCTL=no
IPV6INIT=no
PEERDNS=yes
SLAVE=yes
MASTER=bond0

[[email protected] network-scripts]# cat ifcfg-eth3
DEVICE=eth3
BOOTPROTO=none
#HWADDR=08:00:27:6c:3d:0c
ONBOOT=yes
TYPE=Ethernet
USERCTL=no
IPV6INIT=no
PEERDNS=yes
SLAVE=yes
MASTER=bond0

[[email protected] network-scripts]# cat /etc/modprobe.conf
alias scsi_hostadapter ata_piix
alias scsi_hostadapter1 ahci
alias net-pf-10 off
alias ipv6 off
options ipv6 disable=1
alias snd-card-0 snd-intel8x0
options snd-card-0 index=0
options snd-intel8x0 index=0
remove snd-intel8x0 { /usr/sbin/alsactl store 0 >/dev/null 2>&1 || : ; }; /sbin/modprobe -r --ignore-remove snd-intel8x0
alias eth0 e1000
alias eth1 e1000
alias eth2 e1000
alias eth3 e1000
alias bond0 bonding

網路配置資訊如下：

[[email protected] tmp]# ifconfig 
bond0     Link encap:Ethernet  HWaddr 08:00:27:41:B4:16  
          inet addr:10.1.1.1  Bcast:10.1.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MASTER MULTICAST  MTU:1500  Metric:1
          RX packets:1197 errors:0 dropped:0 overruns:0 frame:0
          TX packets:125 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:106338 (103.8 KiB)  TX bytes:16662 (16.2 KiB)

eth0      Link encap:Ethernet  HWaddr 08:00:27:35:B4:81  
          inet addr:192.168.56.11  Bcast:192.168.56.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1487 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1190 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:146576 (143.1 KiB)  TX bytes:151787 (148.2 KiB)

eth1      Link encap:Ethernet  HWaddr 08:00:27:72:08:46  
          inet addr:10.1.1.11  Bcast:10.1.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:193 errors:0 dropped:0 overruns:0 frame:0
          TX packets:455 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:31434 (30.6 KiB)  TX bytes:22657 (22.1 KiB)

eth2      Link encap:Ethernet  HWaddr 08:00:27:41:B4:16  
          UP BROADCAST RUNNING SLAVE MULTICAST  MTU:1500  Metric:1
          RX packets:591 errors:0 dropped:0 overruns:0 frame:0
          TX packets:93 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:55217 (53.9 KiB)  TX bytes:10511 (10.2 KiB)

eth3      Link encap:Ethernet  HWaddr 08:00:27:41:B4:16  
          UP BROADCAST RUNNING SLAVE MULTICAST  MTU:1500  Metric:1
          RX packets:606 errors:0 dropped:0 overruns:0 frame:0
          TX packets:32 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:51121 (49.9 KiB)  TX bytes:6151 (6.0 KiB)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:3297 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3297 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:4725726 (4.5 MiB)  TX bytes:4725726 (4.5 MiB)

雙網絡卡繫結資訊：

[[email protected] tmp]# cat /proc/net/bonding/bond0 
Ethernet Channel Bonding Driver: v3.4.0-2 (October 7, 2008)

Bonding Mode: fault-tolerance (active-backup)
Primary Slave: None
Currently Active Slave: eth2
MII Status: up
MII Polling Interval (ms): 100
Up Delay (ms): 0
Down Delay (ms): 0

Slave Interface: eth2
MII Status: up
Speed: 1000 Mbps
Duplex: full
Link Failure Count: 0
Permanent HW addr: 08:00:27:41:b4:16

Slave Interface: eth3
MII Status: up
Speed: 1000 Mbps
Duplex: full
Link Failure Count: 0
Permanent HW addr: 08:00:27:6c:3d:0c

4.指令碼程式碼

#!/bin/bash
# Date:2018-11-26 14:28:45
# Author:ZhangJian
# Mail:[email protected]
# Func:Configure Network Bonding
# Version:2.0
#V1.6版本更新:不再將繫結的模式mode=x寫入modprobe.conf檔案，將其寫入ifcfg-bond中，因為在modprobe.conf檔案中時，修改了mode模式後，重啟網路服務可能不生效。
#V2.0版本更新:將primary網絡卡設定為可選擇項。

trap "tput clear;tput cup 3;echo 'Any Questions: Send a message to QQ 1037509307.';tput cup 6;exit" 2 3
if [[ -n $1 ]]; then
  cat <<EOF

Network Configuration Assistant
                    --- Configure Network Bonding v1.5

Usage:

        sh $0
        chmod +x $0 && ./$0

EOF
exit 0
fi

if [[ $UID -ne 0 ]]; then
  tput clear
  tput cup 6 20
  echo -e "You must use the user: \033[31mROOT\033[0m"
  tput cup 10
  exit
fi

ERROR(){
tput cup $1 $2;tput ed
echo 'Input error,Try again pls.'
echo -e 'Press ENTER to continue..._\b\c'
read inputA
}

Check_BakFile(){
#檔案備份函式
#使用方法：
#Check_BakFile 要備份的檔名 備份目錄 -x(按什麼時間格式備份)
case ${3} in
    -d )  #按天備份
        Bak_Date=`date '+%Y-%m-%d'`
        ;;
    -H ) #按小時備份
        Bak_Date=`date '+%Y-%m-%d_%H'`
        ;;
    -M ) #按分鐘備份
        Bak_Date=`date '+%Y-%m-%d_%H:%M'`
        ;;
    -m ) #按月備份
        Bak_Date=`date '+%Y-%m'`
        ;;
    -Y ) #按年備份
        Bak_Date=`date '+%Y'`
        ;;
    * ) #預設按分鐘備份
        Bak_Date=`date '+%Y-%m-%d_%H:%M'`
        ;;
esac
#Bak_Date=`date '+%Y-%m-%d-%H:%M'`

[[ -d ${2}/${Bak_Date} ]] || mkdir -p ${2}/${Bak_Date}
cp -ra ${1} ${2}/${Bak_Date}
}

bonding_pre(){
#雙網絡卡繫結前導函式，判定網絡卡、IP等合法性並引導使用者正確輸入引數。
#全部真實網絡卡
NIC_NAME_all=`ifconfig -a | awk '/\<Ethernet\>/ {print $1}' | grep -wEv '^bond[0-9]+'`
#已經存在的繫結網絡卡
NIC_NAME_bond=`ifconfig -a | awk '/^\<bond[0-9]+\>/ {print $1}'`

#打印出已經是SLAVE的網絡卡
NIC_NAME_slave=`ifconfig -a | sed -n '/SLAVE/{g;1!p;};h' | awk '{print $1}'`
NIC_NAME_slave=${NIC_NAME_slave:=NULL}
#打印出可用網絡卡
NIC_NAME_free=`echo "$NIC_NAME_all" | grep -Fwv "$NIC_NAME_slave"`
#可用網絡卡數量
NIC_NAME_free_nu=`echo "$NIC_NAME_free" | wc -w`

declare -a NIC_LIST
NIC_LIST=($NIC_NAME_free)

info_print(){
tput clear;tput cup 2
cat <<EOF
----------------------------------------------
------  Network Configuration Assistant ------
----------------------------------------------
EOF
tput cup 7
if [[ -n ${1} ]]; then
  echo -e "Already existing Channel Bonding Interface of the system:\n\033[31m${1}\033[0m\n"
fi
}

if [[ "$NIC_NAME_free_nu" -gt 1 ]]; then
  info_print
  echo -e "\033[031m$NIC_NAME_free_nu\033[0m network cards available:"
  echo -e "\033[31m${NIC_LIST[@]}\033[0m"
  echo -e "----------------------------------------------\n"
  #輸入第一塊網絡卡的名稱
  while true; do
    echo -e "\nPlease enter the First NIC:_\b\c"
    read NIC1
    echo ${NIC_LIST[@]} | grep -Fw "$NIC1" &> /dev/null
    if [[ $? -eq 0 ]]; then
      info_print
      echo -e "\033[031m$NIC_NAME_free_nu\033[0m network cards available:\n\033[31m${NIC_LIST[@]}\033[0m"
      echo -e "\nThe information you have entered:\nFirst NIC     : $NIC1"
      echo -e "----------------------------------------------\n"
      break
    else
      info_print
      echo -e "\033[031m$NIC_NAME_free_nu\033[0m network cards available:\n\033[31m${NIC_LIST[@]}\033[0m"
      echo -e "----------------------------------------------\n"
      echo -e "\033[31m${NIC1}\033[0m is not available,Please enter another one."
    fi
  done
  #輸入第二塊網絡卡的名稱
  while true; do
    echo -e "\nPlease select the second NIC:_\b\c"
    read NIC2
    if [[ ${NIC1} != ${NIC2} ]]; then
      echo ${NIC_LIST[@]} | grep -Fw "${NIC2}" &> /dev/null
      if [[ $? -eq 0 ]]; then
        info_print "${NIC_NAME_bond}"
        echo -e "The information you have entered:\nFirst NIC     : ${NIC1}\nSecond NIC    : ${NIC2}"
        echo -e "----------------------------------------------\n"
        break
      else
        info_print
        echo -e "\033[031m$NIC_NAME_free_nu\033[0m network cards available:\n\033[31m${NIC_LIST[@]}\033[0m\n\nThe information you have entered:\nFirst NIC     : ${NIC1}"
        echo -e "----------------------------------------------\n"
        echo -e "\033[31m${NIC2}\033[0m is not available,Please enter another one."
      fi
    else
      info_print
      echo -e "\033[031m${NIC_NAME_free_nu}\033[0m network cards available:\n\033[31m${NIC_LIST[@]}\033[0m\n\nThe information you have entered:\nFirst NIC     : ${NIC1}"
      echo -e "----------------------------------------------\n"
      echo -e "\033[31m${NIC2}\033[0m is the first NIC,Please enter another one."
    fi
  done

  #輸入繫結網絡卡名稱並進行合理性檢查
  if [[ -z ${NIC_NAME_bond} ]]; then
    NAME_bond=bond0
    info_print
    echo -e "The information you have entered:\nFirst NIC     : ${NIC1}\nSecond NIC    : ${NIC2}\nbond name     : ${NAME_bond}"
    echo -e "----------------------------------------------\n"
    echo "The default first bond name is -- bond0."
  else
    while true; do
      echo -e "\nPlease enter a bond name[bonN]:_\b\c"
      read NAME_bond
      #檢查輸入格式是否為bond+數字的格式。
      echo "${NAME_bond}" | grep -wE '^bond[[:digit:]]+$' &> /dev/null
      if [[ $? -eq 0 ]]; then
        echo "${NIC_NAME_bond}" | grep -Fw "${NAME_bond}" &> /dev/null
        if [[ $? -ne 0 ]]; then
          info_print "${NIC_NAME_bond}"
          echo -e "The information you have entered:\nFirst NIC     : ${NIC1}\nSecond NIC    : ${NIC2}\nbond name     : ${NAME_bond}"
          echo -e "----------------------------------------------\n"
          break
        else
          info_print "${NIC_NAME_bond}"
          echo -e "The information you have entered:\nFirst NIC     : ${NIC1}\nSecond NIC    : ${NIC2}"
          echo -e "----------------------------------------------\n"
          echo "You can not use an existing name: ${NAME_bond}"
          echo -e "\033[31m${NAME_bond}\033[0m is not available,Please enter another one like -- bondN."
        fi
      else
        info_print "${NIC_NAME_bond}"
        echo -e "The information you have entered:\nFirst NIC     : ${NIC1}\nSecond NIC    : ${NIC2}"
        echo -e "----------------------------------------------\n"
        echo -e "\033[31m${NAME_bond}\033[0m is not available,Please enter another one like -- bondN."
      fi
    done
  fi

  #設定IP地址
  while true; do
    echo -e "\nPlease enter an IP address:_\b\c"
    read IP_bond
    echo "${IP_bond}" | grep -owE '^(([1-9]|[1-9][0-9]|1[0-9]{2}|2[0-5]{2})\.){3}([1-9]|[1-9][0-9]|1[0-9]{2}|2[0-5]{2})$' &> /dev/null
    if [[ $? -eq 0 ]]; then
      info_print
      echo -e "The information you have entered:\nFirst NIC     : ${NIC1}\nSecond NIC    : ${NIC2}\nbond name     : ${NAME_bond}\nIP address    : ${IP_bond}"
      echo -e "----------------------------------------------\n"
      break
    else
      info_print
      echo -e "The information you have entered:\nFirst NIC     : ${NIC1}\nSecond NIC    : ${NIC2}\nbond name     : ${NAME_bond}"
      echo -e "----------------------------------------------\n"
      echo -e "IP address: \033[31m${IP_bond}\033[0m format errors, please re-enter."
    fi
  done
  #設定netmask
  while true; do
    echo -e "\nPls enter the NETMASK[255.255.255.0]:_\b\c"
    read NETMASK_bond
    NETMASK_bond=${NETMASK_bond:="255.255.255.0"}   #當變數為NETMASK_bond為空時，給其賦預設值255.255.255.0
    echo "$NETMASK_bond" | grep -owE  '^(128|192|224|240|248|252|254|255)\.((0|128|192|224|240|248|252|254|255)\.){2}(0|128|192|224|240|248|252|254|255)$' &> /dev/null
    if [[ $? -eq 0 ]]; then
      info_print
      echo -e "The information you have entered:\nFirst NIC     : ${NIC1}\nSecond NIC    : ${NIC2}\nbond name     : ${NAME_bond}\nIP address    : ${IP_bond}\nnetmask       : ${NETMASK_bond}"
      echo -e "----------------------------------------------\n"
      break
    else
      info_print
      echo -e "The information you have entered:\nFirst NIC     : ${NIC1}\nSecond NIC    : ${NIC2}\nbond name     : ${NAME_bond}\nIP address    : ${IP_bond}"
      echo -e "----------------------------------------------\n"
      echo -e "Input error.\nPlease enter the correct NETMASK or press ENTER to use 255.255.255.0.\n"
    fi
  done
#:<<!zhushi!  #批量註釋，如果開啟批量註釋，預設mode=1
  while true; do
    echo -e "\nPls enter the bonding_mode[default:mode=1,active-backup]:_\b\c"
    read mode_bond
    mode_bond=${mode_bond:="mode=1"}   #當變數為mode_bond為空時，給其賦預設值1
    if [[ ! ${mode_bond} =~ "mode=[0-6]" ]]; then
      info_print
      echo -e "The information you have entered:\nFirst NIC     : ${NIC1}\nSecond NIC    : ${NIC2}\nbond name     : ${NAME_bond}\nIP address    : ${IP_bond}\netmask       : ${NETMASK_bond}"
      echo -e "----------------------------------------------\n"
      echo "Invalid answer: ${mode_bond}"
      echo "Eg: mode={0,1,2,3,4,5,6}"
    else
      info_print
      echo -e "The information you have entered:\n"
      echo -e "First NIC     :${NIC1}\nSecond NIC    :${NIC2}\nbond name     :${NAME_bond}\nIP address    :${IP_bond}\nnetmask       :${NETMASK_bond}\nbonding_mode  :${mode_bond}"
      echo -e "----------------------------------------------\n"
      break
    fi
  done
#!zhushi!

  #選擇是否設定primary網絡卡
  while true; do
    echo "1-${NIC1}"
    echo "2-${NIC2}"
    echo "3-none"
    echo -e "choose whether to set up the primary NIC or not[default:3-none]:_\b\c"
    read get_primary_NIC
    get_primary_NIC=${get_primary_NIC:="none"}
        case ${get_primary_NIC} in
        1 )
          get_primary_NIC=${NIC1}
          #echo "--$get_primary_NIC"
          break
          ;;
        2 )
          get_primary_NIC=${NIC2}
            #echo "--$get_primary_NIC"
          break
          ;;
        3 )
          get_primary_NIC=none
            #echo "--$get_primary_NIC"
          break
          ;;
        none )
          break
          ;;
        * )
            #echo "--$get_primary_NIC"
          info_print
          echo -e "The information you have entered:\nFirst NIC     : ${NIC1}\nSecond NIC    : ${NIC2}\nbond name     : ${NAME_bond}\nIP address    : ${IP_bond}\nnetmask       : ${NETMASK_bond}"
          echo -e "----------------------------------------------\n"
          echo "Invalid answer: ${get_primary_NIC}"
          echo "Pls input a number in {1,2,3} or press ENTER to set up primary NIC none."
          continue
          ;;
      esac

      info_print
      echo -e "The information you have entered:\n"
      echo -e "First NIC     :${NIC1}\nSecond NIC    :${NIC2}\nbond name     :${NAME_bond}\nIP address    :${IP_bond}\nnetmask       :${NETMASK_bond}\nbonding_mode  :${mode_bond}\nprimary NIC   :${get_primary_NIC}"
      echo -e "----------------------------------------------\n"
      break
  done

  #最終輸入資訊確認
  while true; do
    info_print
    echo -e "The information you have entered:\n"
    echo -e "\033[31mFirst NIC     :${NIC1}\nSecond NIC    :${NIC2}\nbond name     :${NAME_bond}\nIP address    :${IP_bond}\nnetmask       :${NETMASK_bond}\nbonding_mode  :${mode_bond}\nprimary NIC   :${get_primary_NIC}\033[0m"
    echo -e "----------------------------------------------\n"
    echo -e "Pls make sure its OK[y/n]:_\b\c"
    read input
    case ${input} in
      [Yy]|[Yy][Ee][Ss] )
        bonding "$NIC1" "$NIC2" "$NAME_bond" "$IP_bond" "$NETMASK_bond"
        break
        ;;
      [Nn]|[Nn][Oo] )
        bonding_pre
      ;;
      * )
        tput cup 7;tput ed
        ERROR 7 10
      ;;
    esac
  done
else
    info_print
    echo -e "You have \033[031m${NIC_NAME_free_nu}\033[0m network cards available:\n"
    #將重點顯示的“網絡卡名”標示為紅色
    echo -e "\033[31m${NIC_LIST[@]}\033[0m\n"
    echo -e "There are \033[31mnot enough\033[0m network cards to make bonding"
    echo -e "Pls check it......\n"
    echo -e 'Press ENTER to exit..._\b\c'
    read answer
    exit 1
fi
}

bonding(){
if [[ $# -lt 5 ]]
then
  echo 'Bonding failed! Please provide enough information!'
  echo -e "\nUsage:\n       sh bonding.sh <NIC1_name> <NIC2_name> <bond_name> <IP> <NETMASK>\n\n"
  exit 1
fi
#get device name and ip information
SLAVE1_DEV="$1"       #SLAVE1_DEV=ethx
SLAVE2_DEV="$2"       #SLAVE2_DEV=ethx
BOND_DEV="$3"         #BOND_DEV=bondx
SLAVE1=ifcfg-"$1"
SLAVE2=ifcfg-"$2"
BOND=ifcfg-"$3"
BOND_IPADDR="$4"
BOND_NETMASK="$5"
BOND_DIR=/etc/sysconfig/network-scripts
if [ -e $BOND_DIR/$BOND ]
then
  echo $BOND_DIR/$BOND is already exist
else
  #file backup
  Check_BakFile "${BOND_DIR}/ifcfg-*" "${BOND_DIR}/inspur_bak" "-M"

#get mac address
  SLAVE1_MAC=`grep 'HWADDR' ${BOND_DIR}/${SLAVE1}`
  SLAVE2_MAC=`grep 'HWADDR' ${BOND_DIR}/${SLAVE2}`

  # modify $BOND
  touch $BOND_DIR/$BOND
  echo "DEVICE=${BOND_DEV}" >> $BOND_DIR/$BOND
  echo "BOOTPROTO=none" >> $BOND_DIR/$BOND
  echo "ONBOOT=yes" >> $BOND_DIR/$BOND
  echo "TYPE=Ethernet" >> $BOND_DIR/$BOND
  echo "USERCTL=no" >> $BOND_DIR/$BOND
  echo "IPV6INIT=no" >> $BOND_DIR/$BOND
  echo "PEERDNS=yes" >> $BOND_DIR/$BOND
  echo "IPADDR=${BOND_IPADDR}" >> $BOND_DIR/$BOND
  echo "NETMASK=${BOND_NETMASK}" >> $BOND_DIR/$BOND
  if [[ ${get_primary_NIC} == none ]]; then
      echo "BONDING_OPTS=\"miimon=100 ${mode_bond}\"" >> $BOND_DIR/$BOND
  else
      echo "BONDING_OPTS=\"miimon=100 ${mode_bond} primary=$(echo ${SLAVE1} | cut -d'-' -f2)\"" >> $BOND_DIR/$BOND
  fi

  # modify $SLAVE1
  > $BOND_DIR/$SLAVE1
  echo "DEVICE=${SLAVE1_DEV}" >> $BOND_DIR/$SLAVE1
  echo 'BOOTPROTO=none' >> $BOND_DIR/$SLAVE1
  #cat $BOND_DIR/../ifcfg-bak/$SLAVE1 |grep HWADDR >> $BOND_DIR/$SLAVE1
  echo "#$SLAVE1_MAC" >> $BOND_DIR/$SLAVE1
  echo ONBOOT=yes >> $BOND_DIR/$SLAVE1
  echo TYPE=Ethernet >> $BOND_DIR/$SLAVE1
  echo USERCTL=no >> $BOND_DIR/$SLAVE1
  echo IPV6INIT=no >> $BOND_DIR/$SLAVE1
  echo PEERDNS=yes >> $BOND_DIR/$SLAVE1
  echo SLAVE=yes >> $BOND_DIR/$SLAVE1
  echo MASTER=$BOND_DEV >> $BOND_DIR/$SLAVE1

  # modify SLAVE2
  > $BOND_DIR/$SLAVE2
  echo "DEVICE=$SLAVE2_DEV" >> $BOND_DIR/$SLAVE2
  echo BOOTPROTO=none >> $BOND_DIR/$SLAVE2
  #cat $BOND_DIR/../ifcfg-bak/$SLAVE2 |grep HWADDR >> $BOND_DIR/$SLAVE2
  echo "#$SLAVE2_MAC" >> $BOND_DIR/$SLAVE2
  echo ONBOOT=yes >> $BOND_DIR/$SLAVE2
  echo TYPE=Ethernet >> $BOND_DIR/$SLAVE2
  echo USERCTL=no >> $BOND_DIR/$SLAVE2
  echo IPV6INIT=no >> $BOND_DIR/$SLAVE2
  echo PEERDNS=yes >> $BOND_DIR/$SLAVE2
  echo SLAVE=yes >> $BOND_DIR/$SLAVE2
  echo MASTER=$BOND_DEV >> $BOND_DIR/$SLAVE2

  [[ -e /etc/modprobe.conf.bak ]] && cp /etc/modprobe.conf /etc/modprobe.conf.bak.new || cp /etc/modprobe.conf /etc/modprobe.conf.bak
  echo "alias $BOND_DEV bonding" >> /etc/modprobe.conf

while true; do
  tput clear;tput cup 2
cat <<EOF
----------------------------------------------
------  Network Configuration Assistant ------
----------------------------------------------

Complete!
File backup directory: ${BOND_DIR}/inspur_bak

you can check the file and then restart the network service.

1 ) service network restart
2 ) exit
----------------------------------------------
EOF
    echo -e "Please make your choice:_\b\c"
    read answer
      case ${answer} in
        1 )
          service network restart
          exit 0
          ;;
        2 )
          exit 0
          ;;
      esac

  done
fi
}

main(){
  while true; do
    bonding_pre
  done
}

main

Linux雙網絡卡繫結指令碼

1.適用範圍

2.指令碼特點

3.使用說明

4.指令碼程式碼

Linux雙網絡卡繫結指令碼

詳解Linux雙網絡卡繫結之bond0

學習記錄——Linux雙網絡卡繫結

Linux 雙網絡卡繫結測試

VMware虛擬機器Linux雙網絡卡繫結配置詳解

CentOS 7.2 team實現網絡卡聚合鏈路(雙網絡卡繫結)指令碼及驗證

linux 雙網絡卡繫結以及解除繫結雙網絡卡方法

linux雙網絡卡繫結

轉帖：Linux雙網絡卡繫結一個IP，實現容錯或負載均衡

Linux雙網絡卡繫結bond詳解

Linux中高階網路配置-bond方式雙網絡卡繫結

linux配置bond雙網絡卡繫結

[Linux] 總結各系統雙網絡卡繫結

Linux總結筆記4-網絡卡配置及雙網絡卡繫結

02 Linux 多網絡卡繫結

關於雙網絡卡繫結socket接收組播的問題

雙網絡卡繫結

RHEL7/CentOS7雙網絡卡繫結-Network Teaming

centos7修改網絡卡名稱、網絡卡雙網絡卡繫結

centos 6.4系統雙網絡卡繫結配置詳解

Linux雙網絡卡繫結指令碼

1.適用範圍

2.指令碼特點

3.使用說明

4.指令碼程式碼

相關推薦