安裝Ubuntu18.04和Windows10雙系統時卡死
阿新 • • 發佈:2018-12-19
錯誤描述: 在安裝Ubuntu18.04的時候會在安裝介面卡住,無法繼續進行下去。
原因分析: Nvidia GPU和Ubuntu18.04系統相容性導致的問題。
- Disable Fast Boot and Secure Boot (or Secure loader).
- Plug in the bootable USB with the Linux distro (mine was Ubuntu 16.04)
- When you see the loader to “Install Ubuntu” etc … press “e” and edit a line: Replace “quiet splash” to “nomodeset” and press F10 to boot. Then after the installation is complete, you will have to reboot.
- This time you will now encounter the GRUB. Again, press “e” and edit a line: In the line that starts with “linux”, add “nouveau.modeset=0” at the end of that line. Your Linux should now boot.
- After this, you need to install the nvidia drivers. Reboot. And then it’s done.
翻譯過來就是:
- 插入一個Ubuntu18.04的啟動U盤。
- 長按F2(不同電腦可能不同)進入BIOS介面中禁用Fast Boot和Secure Boot,並設定U盤作為預啟動項。
- 當看到“Try Ubuntu", “Install Ubuntu”, “…” 這個黑色介面的時候按"e",然後可以看到一段英文,把段落中的"quiet splash"修改成"nomodeset",修改完按F10重啟。
- 然後就直接進入Try Ubuntu的介面,雙擊桌面上的安裝包安裝,如果沒有直接進入Try Ubuntu介面的話就選擇Install Ubuntu安裝。安裝完畢會要求你重啟。
- 再次進入登入Ubuntu系統前的黑色介面,再次按"e",可以看到一段不一樣的英文,把段落中的"linux"打頭的一句話的最後新增上"nouveau.modeset=0"。按F10重啟。