git push origin master報錯,解決方法
阿新 • • 發佈:2019-01-30
今天,用git把原生代碼推送到遠端伺服器上時出現錯誤:
[email protected]:/work2/recvdsrc$ git push origin master
[email protected]'s password:
Counting objects: 44, done.
Compressing objects: 100% (24/24), done.
Writing objects: 100% (25/25), 13.10 KiB, done.
Total 25 (delta 18), reused 0 (delta 0)
remote: error: refusing to update checked out branch: refs/heads/master
remote: error: By default, updating the current branch in a non-bare repository
remote: error: is denied, because it will make the index and work tree inconsistent
remote: error: with what you pushed, and will require 'git reset --hard' to match
remote: error: the work tree to HEAD.
remote: error:
remote: error: You can set 'receive.denyCurrentBranch' configuration variable to
remote: error: 'ignore' or 'warn' in the remote repository to allow pushing into
remote: error: its current branch; however, this is not recommended unless you
remote: error: arranged to update its work tree to match what you pushed in some
remote: error: other way.
remote: error:
remote: error: To squelch this message and still keep the default behaviour, set
remote: error: 'receive.denyCurrentBranch' configuration variable to 'refuse'.
To [email protected]:/home/klha/recvdata/recvdsrc
! [remote rejected] master -> master (branch is currently checked out)
error: failed to push some refs to '[email protected]:/home/klha/recvdata/recvdsrc'
這是由於git預設拒絕了push操作,需要進行設定,修改.git/config新增如下程式碼:
根據提示執行命令解決問題 :
-
git config receive.denyCurrentBranch ignore
以下參考:
http://blog.sina.com.cn/s/blog_55465b470100s638.html
在初始化遠端倉庫時最好使用 git --bare init 而不要使用:git init
如果使用了git init初始化,則遠端倉庫的目錄下,也包含work tree,當本地倉庫向遠端倉庫push時, 如果遠端倉庫正在push的分支上(如果當時不在push的分支,就沒有問題), 那麼push後的結果不會反應在work tree上, 也即在遠端倉庫的目錄下對應的檔案還是之前的內容,必須得使用git reset --hard才能看到push後的內容.