宣告：本文只用於個人學習交流，若不慎造成侵權，請及時聯絡我，立即予以改正

       NON-HLOS.bin檔案是BP側的一個映象，最終被燒寫到modem分割槽，但最近研究發現，其不僅僅包含modem映象，它還包含ADSP映象、Wcnss映象、Venus映象、Widevine映象，還有一些安全相關的映象。AP側Init程序解析init.rc時，會通過kernel PIL驅動程式載入這些映象，最終將相應的modem、ADSP等boot起來。

 一、NON-HLOS.bin檔案生成過程

編譯檔案：common/build/build.py，這個檔案雖然有將近900行，但是最關鍵只有下面幾行：

for step_elem in workflow_elem：

    。。。。

    step_dict = ml.XmlToDict(step_elem)

    step_func = run_step[step_elem.attrib['type']]

    step_func(step_dict)

其中step相關配置檔案：contents.xml，其大概格式如下：

<workflow>

     <step type="exec">

         <params>。。。。。</params>

         <tool_name>。。。。</tool_name>

         <src_file_vars>。。。。。</src_file_vars>

         <destn_dir>。。。。。。。</destn_dir>

     </step>

</ workflow>

其中run_step定義如下：

run_step = {
   'copy'  : workflow_copy,
   'exec'  : workflow_exec,
   'delete': workflow_delete,
   'setenv': workflow_setenv
}

workflow_copy，workflow_exec，workflow_delete三個介面，恰好對應build.py指令碼定義的三個函式，本文以workflow_exec為例簡要說明其編譯過程：

1、解析xml檔案，獲取setp配置內容，並放置在step_dict

2、根據xml檔案type值選取合適的介面，如果step配置內容中type=exec，則相應介面為workflow_exec函式

3、呼叫workflow_exec函式，並將step_dict作為引數傳遞進去

（1） 首先呼叫preprocess_step函式，從引數step_dict獲取step中各項配置

（2）params = ml.evaluate_params(step_dict_flavor)獲取params屬性中各個變數的值

（3）lg.log_exec(params)，執行params屬性中的命令

根據contents.xml檔案中的配置，總結編譯common過程如下：

1、使用pil-splitter.py工具，將相應image中屬性含有pil_split進行分解

2、如果common/build/bin/asic目錄下已存在non-hlos.bin檔案，則刪除non-hlos.bin檔案

3、使用fat_creation.py工具重新生成non-hlos.bin檔案

4、使用fatadd.py工具向non-hlos.bin檔案新增Ver_Info.txt中內容

5、使用ptool.py工具生成相應的分割槽檔案

6、使用checksparse.py工具分解AP的system.img，userdata.img等映象

二、NON-HLOS.bin檔案中各個子系統映象載入過程

1、dts配置：

    pil_mss: qcom,[email protected] {

        compatible = "qcom,pil-q6v55-mss";

        。。。。。。

        qcom,firmware-name = "modem";

         。。。。。。

    };

    qcom,[email protected] {

        compatible = "qcom,pil-tz-generic";

        。。。。。。

        qcom,firmware-name = "adsp";

         。。。。。

    };

    qcom,[email protected] {

        compatible = "qcom,pil-tz-generic";

        。。。。。

        qcom,firmware-name = "wcnss";

         。。。。。

    };

    qcom,[email protected] {

        compatible = "qcom,pil-tz-generic";

        。。。。。。

        qcom,firmware-name = "venus";

        。。。。。。

    };

相應的驅動檔案如下：

kernel/drivers/soc/qcom/peripheral-loader.c

kernel/drivers/soc/qcom/subsys-pil-tz.c

kernel/drivers/soc/qcom/pil-q6v5-mss.c

還需要rc檔案幫忙哦，呵呵

device/qcom/common/rootdir/etc/init.qcom.rc

on early-boot

    。。。。。

    write /sys/kernel/boot_adsp/boot 1

    write /sys/kernel/boot_cdsp/boot 1

    write /sys/kernel/boot_slpi/boot 1

      從上面可知，當手機啟動到kernel階段，PIL驅動只是註冊了相關裝置節點，並沒有發生image載入過程，直至init程序解析init.rc檔案，觸發了early-boot，會向對應裝置節點寫1，從而觸發各個image載入。具體資訊請參考下面log部分。

對應載入映象log如下：

[32m[   22.662154] [33mueventd[0m: firmware: loading 'adsp.mdt' for '/devices/soc/c200000.qcom,lpass/firmware/adsp.mdt'
[32m[   22.673573] [33mueventd[0m: loading /devices/soc/c200000.qcom,lpass/firmware/adsp.mdt took 11ms
[32m[   22.697783] [33mueventd[0m: firmware: loading 'adsp.b02' for '/devices/soc/c200000.qcom,lpass/firmware/adsp.b02'
[32m[   22.708059] [33mueventd[0m: loading /devices/soc/c200000.qcom,lpass/firmware/adsp.b02 took 10ms
[32m[   22.709360] [33mueventd[0m: firmware: loading 'adsp.b03' for '/devices/soc/c200000.qcom,lpass/firmware/adsp.b03'
[32m[   22.722718] [33mueventd[0m: loading /devices/soc/c200000.qcom,lpass/firmware/adsp.b03 took 13ms
[32m[   22.724127] [33mueventd[0m: firmware: loading 'adsp.b04' for '/devices/soc/c200000.qcom,lpass/firmware/adsp.b04'
[32m[   22.815294] [33mueventd[0m: loading /devices/soc/c200000.qcom,lpass/firmware/adsp.b04 took 91ms
[32m[   22.819632] [33mueventd[0m: firmware: loading 'adsp.b05' for '/devices/soc/c200000.qcom,lpass/firmware/adsp.b05'
[32m[   22.833835] [33mueventd[0m: loading /devices/soc/c200000.qcom,lpass/firmware/adsp.b05 took 14ms
[32m[   22.846304] [33mueventd[0m: firmware: loading 'adsp.b06' for '/devices/soc/c200000.qcom,lpass/firmware/adsp.b06'
[32m[   22.856574] [33mueventd[0m: loading /devices/soc/c200000.qcom,lpass/firmware/adsp.b06 took 10ms
[32m[   22.864284] [33mueventd[0m: firmware: loading 'adsp.b07' for '/devices/soc/c200000.qcom,lpass/firmware/adsp.b07'
[32m[   22.878686] [33mueventd[0m: loading /devices/soc/c200000.qcom,lpass/firmware/adsp.b07 took 14ms
[32m[   22.880281] [33mueventd[0m: firmware: loading 'adsp.b08' for '/devices/soc/c200000.qcom,lpass/firmware/adsp.b08'
[32m[   22.887248] [33mueventd[0m: loading /devices/soc/c200000.qcom,lpass/firmware/adsp.b08 took 7ms
[32m[   22.888683] [33mueventd[0m: firmware: loading 'adsp.b09' for '/devices/soc/c200000.qcom,lpass/firmware/adsp.b09'
[32m[   22.890738] [33mueventd[0m: loading /devices/soc/c200000.qcom,lpass/firmware/adsp.b09 took 2ms
[32m[   22.891924] [33mueventd[0m: firmware: loading 'adsp.b10' for '/devices/soc/c200000.qcom,lpass/firmware/adsp.b10'
[32m[   22.903149] [33mueventd[0m: loading /devices/soc/c200000.qcom,lpass/firmware/adsp.b10 took 11ms
[32m[   22.904425] [33mueventd[0m: firmware: loading 'adsp.b11' for '/devices/soc/c200000.qcom,lpass/firmware/adsp.b11'
[32m[   22.906310] [33mueventd[0m: loading /devices/soc/c200000.qcom,lpass/firmware/adsp.b11 took 2ms
[32m[   22.908389] [33mueventd[0m: firmware: loading 'adsp.b12' for '/devices/soc/c200000.qcom,lpass/firmware/adsp.b12'
[32m[   22.910388] [33mueventd[0m: loading /devices/soc/c200000.qcom,lpass/firmware/adsp.b12 took 2ms
[32m[   22.911522] [33mueventd[0m: firmware: loading 'adsp.b13' for '/devices/soc/c200000.qcom,lpass/firmware/adsp.b13'
[32m[   22.913799] [33mueventd[0m: loading /devices/soc/c200000.qcom,lpass/firmware/adsp.b13 took 2ms
[32m[   22.914907] [33mueventd[0m: firmware: loading 'adsp.b14' for '/devices/soc/c200000.qcom,lpass/firmware/adsp.b14'
[32m[   22.917846] [33mueventd[0m: loading /devices/soc/c200000.qcom,lpass/firmware/adsp.b14 took 3ms
[32m[   22.918879] [33mueventd (499) used greatest stack depth[0m: 11184 bytes left
[32m[   24.449519] [33mueventd[0m: firmware: loading 'modem.mdt' for '/devices/soc/4080000.qcom,mss/firmware/modem.mdt'
[32m[   24.451413] [33mueventd[0m: loading /devices/soc/4080000.qcom,mss/firmware/modem.mdt took 2ms
[32m[   24.459602] [33mueventd[0m: firmware: loading 'mba.mbn' for '/devices/soc/4080000.qcom,mss/firmware/mba.mbn'
[32m[   24.470243] [33mueventd[0m: loading /devices/soc/4080000.qcom,mss/firmware/mba.mbn took 10ms
[32m[   24.474895] [33mueventd[0m: firmware: loading 'msadp' for '/devices/soc/4080000.qcom,mss/firmware/msadp'
[32m[   24.478516] [33mueventd[31m: firmware: could not find firmware for msadp
[32m[   24.486109] [33mueventd[0m: loading /devices/soc/4080000.qcom,mss/firmware/msadp took 11ms
[32m[   24.570507] [33mueventd[0m: firmware: loading 'a530_pm4.fw' for '/devices/soc/1c00000.qcom,kgsl-3d0/kgsl/kgsl-3d0/a530_pm4.fw'
[32m[   24.572554] [33mueventd[0m: loading /devices/soc/1c00000.qcom,kgsl-3d0/kgsl/kgsl-3d0/a530_pm4.fw took 2ms
[32m[   24.603141] [33mueventd[0m: firmware: loading 'a530_pfp.fw' for '/devices/soc/1c00000.qcom,kgsl-3d0/kgsl/kgsl-3d0/a530_pfp.fw'
[32m[   24.606785] [33mueventd[0m: loading /devices/soc/1c00000.qcom,kgsl-3d0/kgsl/kgsl-3d0/a530_pfp.fw took 4ms
[32m[   24.636679] [33mueventd[31m: selinux_android_restorecon(/sys/devices/soc/1c00000.qcom,kgsl-3d0/kgsl/kgsl-3d0/a530_pfp.fw) failed: Success
[32m[   24.649677] [33mueventd[0m: firmware: loading 'modem.b02' for '/devices/soc/4080000.qcom,mss/firmware/modem.b02'
[32m[   24.661766] [33mueventd[0m: loading /devices/soc/4080000.qcom,mss/firmware/modem.b02 took 12ms
[32m[   24.665311] [33mueventd[0m: firmware: loading 'modem.b04' for '/devices/soc/4080000.qcom,mss/firmware/modem.b04'
[32m[   24.673339] [33mueventd[0m: loading /devices/soc/4080000.qcom,mss/firmware/modem.b04 took 9ms
[32m[   24.682134] [33mueventd[0m: firmware: loading 'modem.b05' for '/devices/soc/4080000.qcom,mss/firmware/modem.b05'
[32m[   24.685698] [33mueventd[0m: loading /devices/soc/4080000.qcom,mss/firmware/modem.b05 took 3ms
[32m[   24.690788] [33mueventd[0m: firmware: loading 'modem.b06' for '/devices/soc/4080000.qcom,mss/firmware/modem.b06'
[32m[   24.701809] [33mueventd[0m: loading /devices/soc/4080000.qcom,mss/firmware/modem.b06 took 11ms
[32m[   24.706323] [33mueventd[0m: firmware: loading 'modem.b07' for '/devices/soc/4080000.qcom,mss/firmware/modem.b07'
[32m[   24.715939] [33mueventd[0m: loading /devices/soc/4080000.qcom,mss/firmware/modem.b07 took 9ms
[32m[   24.717611] [33mueventd[0m: firmware: loading 'modem.b08' for '/devices/soc/4080000.qcom,mss/firmware/modem.b08'
[32m[   24.733548] [33mueventd[0m: loading /devices/soc/4080000.qcom,mss/firmware/modem.b08 took 16ms
[32m[   24.735186] [33mueventd[0m: firmware: loading 'modem.b09' for '/devices/soc/4080000.qcom,mss/firmware/modem.b09'
[32m[   24.756318] [33mueventd[0m: loading /devices/soc/4080000.qcom,mss/firmware/modem.b09 took 21ms
[32m[   24.761443] [33mueventd[0m: firmware: loading 'modem.b10' for '/devices/soc/4080000.qcom,mss/firmware/modem.b10'
[32m[   24.940472] [33mueventd[0m: loading /devices/soc/4080000.qcom,mss/firmware/modem.b10 took 179ms
[32m[   24.942092] [33mueventd[0m: firmware: loading 'modem.b11' for '/devices/soc/4080000.qcom,mss/firmware/modem.b11'
[32m[   24.951367] [33mueventd[0m: loading /devices/soc/4080000.qcom,mss/firmware/modem.b11 took 9ms
[32m[   24.953021] [33mueventd[0m: firmware: loading 'modem.b12' for '/devices/soc/4080000.qcom,mss/firmware/modem.b12'
[32m[   25.014103] [33mueventd[0m: loading /devices/soc/4080000.qcom,mss/firmware/modem.b12 took 61ms
[32m[   25.027603] [33mueventd[0m: firmware: loading 'modem.b13' for '/devices/soc/4080000.qcom,mss/firmware/modem.b13'
[32m[   25.050447] [33mueventd[0m: loading /devices/soc/4080000.qcom,mss/firmware/modem.b13 took 23ms
[32m[   25.141670] [33mueventd[0m: firmware: loading 'modem.b16' for '/devices/soc/4080000.qcom,mss/firmware/modem.b16'
[32m[   25.153330] [33mueventd[0m: loading /devices/soc/4080000.qcom,mss/firmware/modem.b16 took 12ms
[32m[   25.170805] [33mueventd[0m: firmware: loading 'modem.b17' for '/devices/soc/4080000.qcom,mss/firmware/modem.b17'
[32m[   25.187436] [33mueventd[0m: loading /devices/soc/4080000.qcom,mss/firmware/modem.b17 took 17ms
[32m[   25.189230] [33mueventd[0m: firmware: loading 'modem.b18' for '/devices/soc/4080000.qcom,mss/firmware/modem.b18'
[32m[   25.292187] [33mueventd[0m: loading /devices/soc/4080000.qcom,mss/firmware/modem.b18 took 103ms
[32m[   25.293819] [33mueventd[0m: firmware: loading 'modem.b19' for '/devices/soc/4080000.qcom,mss/firmware/modem.b19'
[32m[   25.296124] [33mueventd[0m: loading /devices/soc/4080000.qcom,mss/firmware/modem.b19 took 2ms
[32m[   25.297689] [33mueventd[0m: firmware: loading 'modem.b20' for '/devices/soc/4080000.qcom,mss/firmware/modem.b20'
[32m[   25.308058] [33mueventd[0m: loading /devices/soc/4080000.qcom,mss/firmware/modem.b20 took 10ms
[32m[   45.810862] [33mueventd[0m: firmware: loading 'wcnss.mdt' for '/devices/soc/a21b000.qcom,pronto/firmware/wcnss.mdt'
[32m[   45.815055] [33mueventd[0m: loading /devices/soc/a21b000.qcom,pronto/firmware/wcnss.mdt took 4ms
[32m[   45.894831] [33mueventd[0m: firmware: loading 'wcnss.b02' for '/devices/soc/a21b000.qcom,pronto/firmware/wcnss.b02'
[32m[   45.904917] [33mueventd[0m: loading /devices/soc/a21b000.qcom,pronto/firmware/wcnss.b02 took 10ms
[32m[   45.935031] [33mueventd[0m: firmware: loading 'wcnss.b04' for '/devices/soc/a21b000.qcom,pronto/firmware/wcnss.b04'
[32m[   45.948467] [33mueventd[0m: loading /devices/soc/a21b000.qcom,pronto/firmware/wcnss.b04 took 13ms
[32m[   45.958084] [33mueventd[0m: firmware: loading 'wcnss.b06' for '/devices/soc/a21b000.qcom,pronto/firmware/wcnss.b06'
[32m[   46.062139] [33mueventd[0m: loading /devices/soc/a21b000.qcom,pronto/firmware/wcnss.b06 took 104ms
[32m[   46.067050] [33mueventd[0m: firmware: loading 'wcnss.b09' for '/devices/soc/a21b000.qcom,pronto/firmware/wcnss.b09'
[32m[   46.075972] [33mueventd[0m: loading /devices/soc/a21b000.qcom,pronto/firmware/wcnss.b09 took 9ms
[32m[   46.077078] [33mueventd[0m: firmware: loading 'wcnss.b10' for '/devices/soc/a21b000.qcom,pronto/firmware/wcnss.b10'
[32m[   46.083643] [33mueventd[0m: loading /devices/soc/a21b000.qcom,pronto/firmware/wcnss.b10 took 6ms
[32m[   46.087139] [33mueventd[0m: firmware: loading 'wcnss.b11' for '/devices/soc/a21b000.qcom,pronto/firmware/wcnss.b11'
[32m[   46.103695] [33mueventd[0m: loading /devices/soc/a21b000.qcom,pronto/firmware/wcnss.b11 took 17ms
[32m[   46.105562] [33mueventd[0m: firmware: loading 'wcnss.b12' for '/devices/soc/a21b000.qcom,pronto/firmware/wcnss.b12'
[32m[   46.110580] [33mueventd[0m: loading /devices/soc/a21b000.qcom,pronto/firmware/wcnss.b12 took 5ms
[32m[   49.471679] [33mueventd[0m: firmware: loading 'wlan/prima/WCNSS_qcom_wlan_nv.bin' for '/devices/soc/a000000.qcom,wcnss-wlan/firmware/wlan!prima!WCNSS_qcom_wlan_nv.bin'
[32m[   49.481196] [33mueventd[0m: loading /devices/soc/a000000.qcom,wcnss-wlan/firmware/wlan!prima!WCNSS_qcom_wlan_nv.bin took 9ms
[32m[   50.569611] [33mueventd[0m: firmware: loading 'cpp_firmware_v1_5_0.fw' for '/devices/soc/1b04000.qcom,cpp/firmware/cpp_firmware_v1_5_0.fw'
[32m[   50.571325] [33mueventd[0m: loading /devices/soc/1b04000.qcom,cpp/firmware/cpp_firmware_v1_5_0.fw took 2ms
[32m[   54.060534] [33mueventd[0m: firmware: loading 'venus.mdt' for '/devices/soc/1de0000.qcom,venus/firmware/venus.mdt'
[32m[   54.062479] [33mueventd[0m: loading /devices/soc/1de0000.qcom,venus/firmware/venus.mdt took 2ms
[32m[   54.087649] [33mueventd[0m: firmware: loading 'venus.b02' for '/devices/soc/1de0000.qcom,venus/firmware/venus.b02'
[32m[   54.097163] [33mueventd[0m: loading /devices/soc/1de0000.qcom,venus/firmware/venus.b02 took 9ms
[32m[   54.102347] [33mueventd[0m: firmware: loading 'venus.b03' for '/devices/soc/1de0000.qcom,venus/firmware/venus.b03'
[32m[   54.107897] [33mueventd[0m: loading /devices/soc/1de0000.qcom,venus/firmware/venus.b03 took 9ms
[32m[   54.108590] [33mueventd[0m: firmware: loading 'venus.b04' for '/devices/soc/1de0000.qcom,venus/firmware/venus.b04'
[32m[   54.111195] [33mueventd[0m: loading /devices/soc/1de0000.qcom,venus/firmware/venus.b04 took 2ms

如果你覺得本文有用，請不要忘記點贊或者評論哦，你們任何一個小舉動，對我來說都是極大的鼓舞，感謝！