LNMP小專案搭建,Centos7.6環境搭建Linux+nginx+mysql+php,wordpress個人部落格的搭建(完整搭建步驟)
一、LNMP搭建,基於nginx伺服器搭建wordpress個人部落格
準備環境:
centos7.6環境下
web伺服器(nginx+php):主機名:web01,ip:192.168.248.172
mysql伺服器(mariadb):主機名:db01,ip:192.168.248.177
關閉selinux安全外掛
關閉防火牆
----------------------------------------------------------------------------------------------------------------------------------------------------------
web01伺服器上:
1.安裝nginx,安裝能夠解析php檔案的相關軟體包
注意:這裡nginx預設是靜態伺服器,要想處理php動態檔案必須要安裝php相關的軟體。
安裝nginx需要先配置nginx的yum倉庫,配置方法在nginx.org官網檢視到:
http://nginx.org/en/linux_packages.html#RHEL-CentOS
按照以上方法,搭建一個穩定版的nginx的yum源,:
[root@web01 html]# cat /etc/yum.repos.d/nginx-stable.repo [nginx-stable] name = Add a nginx_stable repository #只是描述,不重要 baseurl = http://nginx.org/packages/centos/$releasever/$basearch/ #聯網情況下,下載 gpgcheck = 1 #是否開啟檢查,0關閉 gpgkey = https://nginx.org/keys/nginx_signing.key #基於此地址檢查
搭建好yum倉庫後
1 [root@web01 html]# yum install nginx -y #開始安裝 2 [root@web01 html]# systemctl start nginx 3 [root@web01 html]# systemctl enable nginx #把nginx執行為開機自啟動 4 [root@web01 html]# systemctl status nginx #檢查nginx狀態
web01伺服器上:
#執行yum install安裝以下軟體包,我用的是阿里雲的base源和epel源
[root@web01 html]# rpm -qa |grep php #列出相關的php軟體包 php-common-5.4.16-46.el7.x86_64 php-fpm-5.4.16-46.el7.x86_64 php-mysql-5.4.16-46.el7.x86_64 php-pdo-5.4.16-46.el7.x86_64 [root@web01 html]# systemctl start php-fpm
#這裡可以選擇啟動php-fpm服務,這個服務是幫助nginx解析動態php檔案的。
-----------------------------------------------------------------------------------------------------------------------------------------
db01伺服器上:
#安裝mysql服務,注意:centos7裡mysql服務的軟體包名為mariadb,而非mysql
#安裝以下軟體包
[root@db01 ~]# rpm -qa |grep mariadb mariadb-libs-5.5.60-1.el7_5.x86_64 mariadb-5.5.60-1.el7_5.x86_64 mariadb-server-5.5.60-1.el7_5.x86_64 [root@db01 ~]# systemctl start mariadb.service #啟動mariadb服務 [root@db01 ~]# systemctl enable mariadb.service [root@db01 ~]# systemctl status mariadb.service
2.配置nginx+php+mysql,(wordpress部落格的搭建),如果出現404錯誤可參考對照下面程式碼改進
[root@web01 html]# cat /etc/nginx/nginx.conf ... include /etc/nginx/conf.d/*.conf; [root@web01 html]# cat /etc/nginx/conf.d/web.test.com.conf #主配置檔案包含了以.conf結尾的檔案 server { listen 80; #nginx服務被監聽在的埠,可修改 server_name www.dark.com; #定義的域名,windows使用域名訪問時要在windows下hosts定義 access_log /var/log/nginx/dark.com.log tt; #定義的日誌格式,tt為定義的日誌格式變數 #以下才是重點 location / { root /usr/share/nginx/html; #這裡定義預設的/目錄為/usr/share/nginx/html,即php檔案所在的目錄 index index.html index.php; #設定預設的訪問頁面,注意:index.php不能少 } #以下的php動態的編寫格式在default.conf檔案裡有例句格式 location ~ \.php$ { #匹配以php結尾的檔案 root html; fastcgi_pass 127.0.0.1:9000; #匹配到的php檔案讓php-fpm服務幫忙解析,檢查程序埠是否開啟 fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /usr/share/nginx/html$fastcgi_script_name; #指定了存放php檔案的位置,也可以在root那行定義 include fastcgi_params; } } [root@web01 html]# nginx -t #檢查nginx配置檔案語法是否有誤 [root@web01 html]# systemctl restart nginx
3.準備好wordpress壓縮包,網上自行下載,注意:wordpress5.2以上版本要求的php版本為5.6以上的。
[root@web01 html]# pwd /usr/share/nginx/html [root@web01 html]# unzip wordpress5.0.zip
#解壓wordpress壓縮包至 /usr/share/nginx/html下,即前面nginx配置檔案定義的路徑,注意:解壓後要有index.php檔案,而不是wordpress5.0目錄。
[root@web01 html]# ll #這裡搭建的是php網站,最好把解壓之前已經存在的無關的html,php和其他檔案都註釋了
-----------------------------------------------------------------------------------------------------------------------------------------
#注意:瀏覽器有一定時間的快取,如果頁面打不開或與配置的不一致也很有可能是快取的原因,
這時候可在命令列配合curl 命令來檢查。
#完成上述步驟後,就可以通過瀏覽器開始wordpress初始化安裝了
初始頁:http://192.168.248.172/index.php 例如:http://ip/index.php
初始化時要求輸入:
資料庫名稱為wordpress
資料庫使用者名稱為wordpress
資料庫密碼為123
表字首wp_
#完成上面頁面的輸入資訊後,會提示只能手動輸入,則
[root@web01 html]# vim wp-config.php #把框中的資訊複製到 wp-config.php裡
#資訊輸入完成完成
----------------------------------------------------------------------------------------------------------------------------------------
#db01上建立資料庫,使用者和密碼要與web頁面輸入的對應一致:
[root@db01 ~]# mysql #進入mysql,執行以下幾行
create database wordpress; #建立wordpress表 grant all privileges on wordpress.* to wordpress@'localhost' identified by '123'; #建立使用者名稱和密碼,即初始化新增的使用者密碼 grant all privileges on wordpress.* to wordpress@'192.168.248.%' identified by '123'; #允許此網段內使用此使用者名稱密碼登入資料庫 [root@web01 html]# mysql -uwordpress -p123 -h192.168.248.177 #在web01上驗證是否能遠端登入資料庫 重啟所有服務 [root@web01 html]# systemctl restart nginx [root@web01 html]# systemctl restart php-fpm [root@web01 html]# ss -lntup |grep 9000 [root@db01 ~]# systemctl restart mariadb.service
###############部落格文章為原創,僅供參考學習使用########################
--------------------------------------------------------------------------------------------------------------------------------------------
大功告成,搭建完成